HobbyStar V2 ESC's feature built-in temperature monitoring for both ESC and motor to help protect your valuable electronics.  ESC and motor temperature protection parameters can be programmed individually via the HobbyStar V2 LED Program Card (must use a compatible HobbyStar motor for motor temperature features).

Waterproof design keeps you going through wherever your drive takes you, and a selectable 6.1V/5A or 7.4V/5A BEC keeps even the most power-hungry servos going strong.

ESC has 6.5mm female terminals for motor wires, includes pre-tinned plug-in motor leads for easy connection to your motor.

Features:

• Waterproof design
• Built-in fan
• Selectable 6.1V/5A or 7.4V/5A BEC
• Programmable ESC and motor thermal protection (must use compatible motor) 
• Fully programmable via HobbyStar V2 LED Program Card

Specifications:

• Cont/Burst Current: 120A/860A
• Input: 3-6S LiPo, 9-18 Cell NiMh
• 4S LiPo, 12 Cell NiMh Motor Limit: 42XX or smaller, <3000KV On-road, 2500KV Off-road
• 6S LiPo, 18 Cell NiMh Motor Limit: 42XX or smaller, <2500KV On-road, 2000KV Off-road
• For 1/8 Scale Cars
• Resistance: 0.00035ohm
• BEC: 6.1V/5A or 7.4V/5A switch-mode
• Dimensions: 57.5x45x37mm
• Motor Connection: 6.5mm sockets (includes pre-tinned motor leads)
• Battery Plug: Dual XT60 (series)
• Weight: 132g

With the power to throw your truck around like a toy, the HobbyStar 4076 brushless, sensorless motor is the ideal powerplant for to supply your 1/8 scale vehicle with tire-shredding power.  4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 76mm length make this the ultimate motor for your monster truck or truggy.

Features:

• Brushless, sensorless 4-pole motor
• 12-slot high-torque stator
• CNC machined 6061 T6 billet aluminum heatsink can
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
• Precision balanced rotor for smooth operation, reliability and maximum RPM
• Stator-Super Thin (0.2mm) laminations
• Removable/replaceable rotor
• Precision engineered for maximum energy conversion

The same 1/8 scale powerhouse design as the HobbyStar 4068 sensorless motor, the HobbyStar 4268 adds a sensor to provide silky-smooth operation at all RPM's.  Gold-plated solder tabs feature a concave design to hold solder in place for an easy, clean connection to motor.

A powerhouse motor for your 1/8 scale buggy, the HobbyStar 4268 brushless, sensored motor is the ideal powerplant for to supply your 1/8 scale vehicle with tire-shredding power.  4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 68mm length make this the ultimate motor for your 1/8 buggy.

Features:

• Brushless, sensored 4-pole motor
• 12-slot high-torque stator
• CNC machined 6061 T6 billet aluminum heatsink can
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
• Precision balanced rotor for smooth operation, reliability and maximum RPM
• Stator-Super Thin (0.2mm) laminations
• Removable/replaceable rotor
• Precision engineered for maximum energy conversion

HobbyStar V2 motors and ESC's now include built-in temperature monitoring and thermal protection to protect your valuable electronics.  When paired with a compatible HobbyStar ESC, the user can set up the system to either reduce or completely cut off power if either the motor, or ESC temperature exceeds the programmed limit. Motors can be run without temperature port connected when paired with ESC's that do not offer temperature monitoring. 

A powerhouse motor for your 1/8 scale buggy, the HobbyStar 4268 V2 brushless motor is the ideal powerplant for to supply your 1/8 scale vehicle with tire-shredding power.  4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 68mm length make this the ultimate motor for your 1/8 buggy. 

Features:

• Built-in temperature sensor (must use with compatible ESC).
• Brushless, sensored 4-pole motor
• 12-slot high-torque stator
• CNC machined 6061 T6 billet aluminum heatsink can
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
• Precision balanced rotor for smooth operation, reliability and maximum RPM
• Stator-Super Thin (0.2mm) laminations
• Removable/replaceable rotor
• Precision engineered for maximum energy conversion

The HobbyStar 540 V2 motor is all new from the ground up, the result of refining an already proven design.  HobbyStar motors are known for being one of the smoothest powerplants on the track, and the V2 takes that buttery-smooth operation to the next level with an updated sensor board that even incorporates dual ports for the ultimate in flexibility.  Every component of the V2 motors was evaluated, even the case screws have been upgraded to titanium-nitride coated aluminum units (an industry first). The result is a motor that is lighter, smoother and most importantly even more powerful than ever.

NOTE: 5.5T and below motors are VERY HIGH KV, and are not meant for extended use on 2S as they will easily overheat.  These are intended for drag-race use only where they will see short bursts of use. 

 Features:

• Re-designed motor can for more efficient cooling
• All-new rotor with stronger neodymium magnets
• New stator design is more efficient and yields higher average KV ratings
• Titanium-nitride coated aluminum can screws
• Gold-plated solder tabs
• All-new sensor board with dual sensor ports
• Weighs 20g less than V1 motors

A powerhouse motor for your 1/8 scale buggy, the HobbyStar 4068 brushless, sensorless motor is the ideal powerplant for to supply your 1/8 scale vehicle with tire-shredding power.  4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 68mm length make this the ultimate motor for your 1/8 buggy.

Features:

• Brushless, sensorless 4-pole motor
• 12-slot high-torque stator
• CNC machined 6061 T6 billet aluminum heatsink can
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
• Precision balanced rotor for smooth operation, reliability and maximum RPM
• Stator-Super Thin (0.2mm) laminations
• Removable/replaceable rotor
• Precision engineered for maximum energy conversion

With a waterproof design featuring recessed cooling fins for added clearance, the HobbyStar 4068 4-pole motor is a potent powerhouse for 1/8 buggies.   Features the same 4-pole design and a 12-slot stator from the standard 4068 motor in a lighter-weight can.  Pre-soldered 4.0mm bullet terminals to make installation a snap.

Features:

• Brushless, sensorless 4-pole motor
• Waterproof design
• 12-slot high-torque stator
• CNC machined 6061 T6 billet aluminum heatsink can
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Multiple mounting holes with M3 and M4 threads
• Precision balanced rotor for smooth operation, reliability and maximum RPM
• Stator-Super Thin (0.2mm) laminations
• Precision engineered for maximum energy conversion

Voltage recommendations in the table below are guidelines for the voltage you can safely run.  It is still critical that the user monitor motor temps and adjust gearing if necessary, any motor can overheat to the point of destruction if over-geared even when running at or below the rated voltage. 

HobbyStar V2 motors and ESC's now include built-in temperature monitoring and thermal protection to protect your valuable electronics.  When paired with a compatible HobbyStar ESC, the user can set up the system to either reduce or completely cut off power if either the motor, or ESC temperature exceeds the programmed limit. Motors can be run without temperature port connected when paired with ESC's that do not offer temperature monitoring. 

3674 4-pole motor provides tremendous torque and comes with pre-installed 4.0mm bullet connectors. 

Features:

• 4-pole motor with 12-slot high-torque design
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.35mm) stator laminations 

HobbyStar V2 motors and ESC's now include built-in temperature monitoring and thermal protection to protect your valuable electronics.  When paired with a compatible HobbyStar ESC, the user can set up the system to either reduce or completely cut off power if either the motor, or ESC temperature exceeds the programmed limit. Motors can be run without temperature port connected when paired with ESC's that do not offer temperature monitoring. 

3670 4-pole motor provides tremendous torque and comes with pre-installed 4.0mm bullet connectors. 

Features:

• 4-pole motor with 12-slot high-torque design
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.35mm) stator laminations 

HobbyStar V2 motors and ESC's now include built-in temperature monitoring and thermal protection to protect your valuable electronics.  When paired with a compatible HobbyStar ESC, the user can set up the system to either reduce or completely cut off power if either the motor, or ESC temperature exceeds the programmed limit. Motors can be run without temperature port connected when paired with ESC's that do not offer temperature monitoring. 

3665 4-pole motor provides tremendous torque and comes with pre-installed 4.0mm bullet connectors. 

Features:

• 4-pole motor with 12-slot high-torque design
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.35mm) stator laminations 

HobbyStar 3674 4-pole brushless motor features a 74mm length can which provides incredible torque, and versatile waterproof design allows use in a variety of applications. motor leads come with pre-installed 4.0mm gold-plated bullet plugs for easy, no-soldering connection.

Features:

• 4-pole motor with 12-slot high-torque design
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.35mm) stator laminations 

HobbyStar V2 motors and ESC's now include built-in temperature monitoring and thermal protection to protect your valuable electronics.  When paired with a compatible HobbyStar ESC, the user can set up the system to either reduce or completely cut off power if either the motor, or ESC temperature exceeds the programmed limit. Motors can be run without temperature port connected when paired with ESC's that do not offer temperature monitoring. 

3660 4-pole motor provides gobs of torque and comes with pre-installed 4.0mm bullet connectors. 

Features:

• 4-pole motor with 12-slot high-torque design
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.35mm) stator laminations 

The HobbyStar 550 4-pole brushless, sensorless motor is based on the same design as our powerhouse 540 sensorless motor, but combines a longer 550 sized and a 5mm shaft for a bulletproof design. The perfect motor when a high-torque, high-performance powerplant is required such as 4x4 short-course trucks.  A beautifully machined T6 billet-aluminum housing contains a 4-pole, 12-slot high-torque rotor spinning on High-RPM ABEC5 oversized bearings for a powerful, reliable motor choice for your 1/10 scale vehicle.  Comes with motor leads with 4.0mm bullet connectors already installed. Available in a wide variety of KV ratings.

Features:

• 4-pole 12-slot high-torque design
• CNC machined 6061 T6 billet aluminum can
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.2mm) stator laminations 
• Removable/replaceable rotor
• Precision Engineered for maximum energy conversion

The HobbyStar 540 4-pole brushless, sensorless motor is perfect where a high-torque, high-performance powerplant is required.  A beautifully machined T6 billet-aluminum housing contains a 4-pole, 12-slot high-torque rotor spinning on High-RPM ABEC5 oversized bearings for a powerful, reliable motor choice for your 1/10 scale vehicle.  Comes with motor leads with 4.0mm bullet connectors already installed. Available in a wide variety of KV ratings.

Features:

• 4-pole 12-slot high-torque design
• CNC machined 6061 T6 billet aluminum can
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.2mm) stator laminations 
• Removable/replaceable rotor
• Precision Engineered for maximum energy conversion

Designed with 1/10 scale competition in mind, the HobbyStar 540 brushless, sensored motor packs all the same features as our 540 Competition 1/10 motor but without adjustable can timing for those racers who do not need it. All the other features remain, like precision high RPM ABEC5 bearings and precision engineering for maximum energy conversion to give you the edge you need to win.  Available in a wide variety of turns in both SPEC and MOD versions, all housed in a beautifully machined T6 billet aluminum housing for the ultimate in strength and heat dissipation.  

Features:

• High RPM precision bearings
• CNC machined billet T6 aluminum heatsink can
• High-purity copper windings maximize conductivity
• High-power solder tabs
• Powerful sintered neodymium magnets
• Precision engineered for maximum energy conversion
• Available in both SPEC and MOD versions