Experience Seamless Tire Balancing with SKYRC: The SKYRC RC Tire Balancer brings unparalleled precision to RC racing enthusiasts. By incorporating Bluetooth connectivity and a dedicated app, this device simplifies the tire balancing process, allowing for accurate adjustments that enhance performance and reduce wear on your RC car.

Advanced Technology for Optimal Performance: Utilizing a high-accuracy load cell and a precision stepper motor, the SKYRC Tire Balancer ensures every tire is balanced to perfection. The innovative balancing algorithms are tailored specifically for RC tires, promoting stability and maneuverability at high speeds.

Designed for Convenience and Compatibility: Compatible with 1/10 scale RC cars (and 1/8 with an optional adapter), this tire balancer is a versatile tool for a wide range of racing enthusiasts. The intuitive RC Gears app provides real-time data and guidance, making tire balancing accessible for both beginners and seasoned racers.

Enhanced User Experience with Thoughtful Features: The 2.8-inch TFT screen offers a clear view of the balancing process, even in direct sunlight. The device's thoughtful design includes a calibration function for precise measurements and reverse polarity protection for safe operation.

What's Included for a Complete Set-Up: Each SKYRC Tire Balancer comes with essential accessories, including a 1/10 tire adapter, balancing putty, a DC power cable, and a carrying case for portability. An optional 1/8 tire adapter is available to accommodate different tire sizes.

Watch a video about Technical Insights, Demonstrations & Guide to Solving Common Problems

SKYRC 1/8 Buggy Setup Station

Thanks to this setup system set in elegant black, which was specially designed for 1/8 buggies, almost all important parameters can be optimized conveniently and easily. After all, the better a RC car is set up, the more fun it gets when racing on the next track.

Adjustable Parameters

• Camber (+/- 10°)
• Toe (+/- 40°)
• Caster (+/- 20°)
• Steering

Includes
4x Measurement gauges for each suspension
1x Toe gauge

Dial in repeatable handling the way racers actually tune: with numbers. SKYRC’s 1/10 Touring Chassis Setup System lets you measure and set camber, caster, toe, and steering throw with precision across all four corners, so left/right and front/rear stay consistent after every rebuild or track change.

Mount your chassis on the station, secure it with the adjustable arms, and use the included gauges to tweak suspension and steering - whether you're chasing neutral handling in tight corners or replicating a proven setup from last weekend's race. It's a baseline tool for serious tuning: consistent geometry means predictable tire wear, better turn-in, and lap times that shave seconds without guesswork. Purpose-built for on-road geometry—ideal for spec racing, mod TC, and drift baselines where tiny angle changes matter.

CNC-machined from durable aluminum with a black anodized finish, this compact station (260 x 180 x 25mm, 850g) packs into your pit bag easily and includes a hard carry case for protection. The four corner gauges slide smoothly on bearings for precise readings, while the toe plate ensures front-end alignment down to 0.5° increments. No batteries needed - just a flat workbench. Racers confirm it works seamlessly for drift and touring setups, as long as your chassis width matches standard 1/10 on-road specs (off-road versions are wider and incompatible).

Key Specifications

• Model: SK-600069-26
• Compatibility: All 1/10-scale touring/on-road cars (not off-road or 1/8)
• Adjustable Parameters: Camber (±3° typical, per corner), Toe (±5° front/rear), Steering throw, Caster markings
• Included Tools: 4x corner measurement gauges, 1x toe-in/out plate, adjustable arms, carry case
• Construction: Black anodized CNC aluminum
• Dimensions / Weight: 260 x 180 x 25mm / 850g
• Accuracy: 0.5° increments for toe/camber; bearing-guided for smooth operation

Data-driven geometry. Consistent setups. Faster laps.

NOTE: Does not work with AE B6 series buggies, and fit on all buggies cannot be guaranteed.

SKYRC 1/10 Buggy Setup Station

Thanks to this setup system set in elegant black, which was specially designed for 1/10 buggies, almost all important parameters can be optimized conveniently and easily. After all, the better a RC car is set up, the more fun it gets when racing on the next track.

Adjustable Parameters

• Camber (+/- 10°)
• Toe (+/- 40°)
• Caster (+/- 20°)
• Steering

Includes
4x Measurement gauges for each suspension
1x Toe gauge

Get your chassis balance dialed with the SKYRC SCWS2000 Wireless Corner Weight System. Corner weights are one of those "small changes, big results" tools - especially for touring and drift cars where a few grams left or right can change steering feel, traction roll, and consistency. SCWS2000 measures all 4 corners in real time so you can see front vs rear, left vs right, and diagonal balance while you make adjustments to preload, ride height, battery position, electronics placement, and ballast.

The best part is the workflow. No display box, no wire mess across your bench. Each pad connects over Bluetooth 5.0 to the RC Gears app (iOS and Android), so you get a full-screen layout that is easy to read at the track. You can quickly confirm total weight, corner weights, and distribution, then re-check after each change. There is also in-app calibration support if you want to zero things in using a 2000g reference weight.

The system is compact and travel-friendly. Each scale pad supports up to 2000g (8000g total), with 0.1g increments (0.01 oz) and SKYRC calls out 1g accuracy for RC setup work (tolerance is listed as +/- 3g). Pads run on CR2450 coin batteries, and SKYRC notes up to about 30 hours of continuous runtime. Each pad is about 68x68x22.5mm and about 70g, so it fits easily in a pit bag without taking over your toolbox.

Get repeatable, numeric readings of your gear differential’s hardness so you can build, log, and exactly replicate winning setups instead of trusting "feel". That means fewer guess-and-check rebuilds and more consistent left/right and front/rear balance - helping you match handling to track grip and conditions across race weekends.

Just plug in any 5 V Micro-USB source (power bank, charger, laptop), attach the diff with the included adapter, press the button, and in 3–5 seconds you have a hard number you can record and compare. For maximum consistency, test at the same temperature - silicone oil viscosity changes with heat, and serious racers know that matters.

Precision-machined from a single block of anodized aluminum, the Diff Analyzer is only 54×28×24.8mm and 59g - small enough to toss in any pit bag or a pocket, tough enough for daily track use. Out of the box it works with all 1/10-scale gear diffs via the included 7mm hex (wheel-nut) and dogbone/pin/outdrive adapters. Optional adapters add 1/8-scale buggies/truggies and Mini-Z support, letting you standardize readings across your entire fleet.

Key specs

• Model: SK-500026-03
• Power: 5 V Micro-USB (any power bank or USB port)
• Test Time: ~3–5 seconds per diff
• Display: Clear white LED numeric value
• Compatibility: All 1/10-scale gear diffs (adapters included); 1/8-scale & Mini-Z with optional adapters
• Dimensions / Weight: 54 × 28 × 24.8 mm / 59 g
• Construction: CNC-machined anodized aluminum
• Included: 7 mm hex adapter + dogbone/pin/outdrive adapter for 1/10-scale

Data-driven diff tuning. Replicate fast setups. Win more mains.

Trying to glue tire sidewalls while the tire wobbles around the bench is how good prep turns into a tiny sticky weather event. The SKYRC Tire Sidewall Gluing Dock gives 1/10 RC racers a controlled way to rotate the tire while you apply sidewall glue, so the job is cleaner, more even, and less dependent on having a third hand.

The Sidewall Dock uses a low-RPM motor with a rotary speed control knob, plus clockwise and counter-clockwise rotation. That matters on carpet, sealed clay, and other high-grip setups where reinforced sidewalls can reduce tire deformation and help cornering feel more predictable.

Power comes through an XT60 input at 6-12V DC, so it can sit on the pit table with a suitable 2S LiPo or live on the bench with a 12V supply. A locking screw, tire mounting post, and anti-slip rubber feet keep the process pleasantly boring, which is exactly what tire prep should be.

Designed for 1/10 on-road and off-road RC tire prep. Glue, battery, and power supply are not included.

Quick specs:

• Official part number: SK-600162-01
• Applicable models: 1/10 RC
• Input voltage: DC 6-12V
• Input connector: XT60
• Input current: DC 130mA max
• Rotation speed: 33RPM with 5RPM tolerance
• Rotation direction: clockwise / off / counter-clockwise
• Speed control: rotary speed adjustment knob
• Dimensions: 90x90x28.9mm
• Weight: approx. 258g

Light your pit the way racers actually work - bright, soft, and adjustable. The SKYRC LED Pit Light V2 delivers 180–600 lumens with six dimming steps and three color temperatures (3000K/3500K/4000K) so you can reduce glare on carbon and aluminum while still seeing tiny screws and solder joints. A foldable arm with around 270° rotation lets you aim light exactly where you need it, and touch-sensitive controls keep setup fast and clean at the bench.

Power it two ways: standard 6–15V DC (great with a pit supply) or USB 5V/2.1A when you want minimal wiring. Inside are 32 high-power LEDs that sip ≤11W yet output the equivalent of a much larger lamp. Compact and travel-ready, the V2 measures ~281×60×314.5 mm and weighs ~460 g, making it easy to pack for race day.

SKYRC part number SK-600089-01

Careful shock setup only works when the oil behaves like oil. Trapped air compresses, which can make damping feel vague and leave carefully built shocks behaving differently. The SKYRC Shock Oil Bubble Buster uses adjustable vacuum pressure to pull trapped air and micro-bubbles from oil-filled RC shocks, giving each rebuild a cleaner, more repeatable starting point.

Set the filled shock bodies in the built-in multi-size stand, tighten the vent screw, fit the clear cup, and turn the control knob. Turn it farther for faster vacuum, or back it down for thinner oil. Watch the bubbles rise, switch the unit off when they are gone, then open the vent before lifting the cup. Simple, manual, and blissfully free of another app.

The stand fits 13-19mm shock bodies, covering common 1/8 off-road, 1/10 touring, and crawler shocks. Use 5V USB-C at the workbench or a 5-15V XT60 source trackside. Maximum input current is 1A, and rated vacuum pressure is -36.05kPa +/- 2kPa.

It can also help foam tires absorb tire additive more evenly. Foam compounds vary, so test a small area first. The box contains the main unit and manual; shocks, oil, power source, and cable are not included.

Quick specs:

• Vacuum pressure: about -36 kPa (-36.05 kPa +/- 2 kPa)
• Pump power adjustment: 3-5.5V via rotary knob - higher for thick oils, lower for thin oils
• Shock body diameter: 13-19mm
• Capacity: a single shock or a batch on the multi-hole stand
• Power input: USB-C (5V) or XT60 DC input (5-15V), max 1A
• Internal battery: none - needs external power to run
• Controls: rotary power/speed knob plus a vent screw to release the vacuum
• Chamber: transparent cup over the shock stand, so you can watch the bubbles leave
• Dimensions: 98x88x185mm
• Operating range: 0C to 40C, 10-90 percent humidity, non-condensing
• Secondary use: helps traction additive penetrate deeper into foam tires; test a small area first
• In the box: vacuum unit (base, multi-size shock stand, clear cup), instruction manual
• Limitation: mild vacuum tuned for shock oil - not a shop degassing chamber for resin or silicone work

RC cars have a special talent for collecting dust, sand, grass, and suspicious bits of track debris in places that seem specifically designed to be annoying. The SKYRC RC AirDuster is the tidy answer to that problem - a cordless blower built for proper RC cleanup, quick drying after wet runs, and cooling motors and ESCs between heats without dragging out a compressor or wasting canned air.

It is powerful in a very practical way. The brushless motor spins up to 80,000 RPM, the trigger is stepless, and you get 6 speed levels plus cruise mode, which means you can go from "gentle around electronics" to "remove half the parking lot from the chassis" without much drama. It feels more like a tool and less like one of those gadgets that looked clever online and then spent the rest of its life in a drawer.

The rest of it is equally sensible. Dual 21700 Li-ion cells give it 8000mAh total capacity, USB-C charging keeps life simple, and the compact 145x120x45mm body weighs about 340g, so it is easy to toss in a pit box and forget about until the moment you are very glad you brought it. Which is, in fairness, exactly what good tools are supposed to do.

If you ever feel like your car "should" handle the same but does not, ride height is one of the first things to check. A couple tenths of a millimeter can be the difference between a calm, repeatable chassis and a car that pushes one way, traction rolls easier on one side, or changes character as the tires wear. This SKYRC Digital Ride Height Gauge gives you a fast, repeatable way to measure and match ride height at all four corners, so your adjustments are based on numbers, not guesswork.

The big advantage over most mechanical gauges is how easy it is to get the reading right. You are not lining up a slider and squinting at tiny etched marks or trying to read from a weird angle under pit lighting. You place the gauge, let the slim 2mm flat blade reach the measuring point, and read the number. The display rotates 180 degrees so you can read it from either side of the car without moving everything around.

It is also one of the most versatile ride height tools you can keep in your box. The 2mm to 38mm range covers a wide spread of setups from 1/24 all the way to 1/8, so one tool works across your whole lineup. It reads in 0.1mm steps, supports mm/in unit switching, and includes multi-point calibration with the included block (2mm, 10mm, 20mm). Accuracy is +/-0.3mm from 2mm to 20mm and +/-0.5mm over 20mm. Powered by 1x AAA with auto power-off.

The SkyRC Rubber Tire Sander has a 7.2V-12V and can be can be powered by a power supply, as well as powered directly from a LiPo battery (power cables come equipped with 4.0mm bullet plugs). 

The Tire Sander is a quick and easy way to remove the seam from the center of a new tire, without having to take several laps around the track.

Rubber tire sander for touring class, powerful high torque DC motor with dual metal bearings and a lightweight aluminum case.

Getting camber right on a 1/8 car matters, but the usual routine of holding a gauge in place and trying to read tiny markings is not exactly anyone's favorite part of setup. The SKYRC CTG-016 is the cleaner answer - a digital camber gauge sized for 1/8 RC cars that measures both camber and toe, then sends the reading straight to the RC Gears app on your phone. That makes setup changes quicker to read, easier to repeat, and a lot less annoying when you are trying to match both sides properly.

Like the 1/10 version, it uses Bluetooth 5.0 for real-time display, charges by USB-C, and is built from CNC-machined aluminum for stability and durability. It keeps the same +/-17.5 degree measuring range and +/-0.2 degree accuracy, but with the longer 45x12x100mm body sized for 1/8 applications. Weight is 58g, battery capacity is 200mAh, and the whole thing is small enough to live in a pit bag instead of on a shelf where good setup tools go to be forgotten.

If your touring car feels a little different every time you put it on the table, the camber setting is a good place to stop guessing. The SKYRC CTG-015 gives you a repeatable digital reading for camber, and it can also help with toe checks when used vertically on a setup station.

Instead of squinting at a mechanical gauge and convincing yourself that "close enough" is a setup philosophy, the CTG-015 sends real-time readings to the app over Bluetooth 5.0. It reads across a +/-17.5 degree range with +/-0.2 degree accuracy, which is the kind of boring number that becomes very exciting when your car stops doing weird things mid-corner.

The gauge has a compact metal body, USB-C charging, and a built-in 3.7V 200mAh LiPo battery. This is the 1/10 touring car size, SK-500042, measuring 45x12x80mm and weighing 53g. Keep the 1/8 version out of your mental parts bin unless you actually need the longer one.

Includes one SKYRC CTG-015 Digital Camber Gauge. SKYRC Part Number: SK-500042.

Quick specs:

• Measuring range: +/-17.5 degrees
• Measuring accuracy: +/-0.2 degrees
• Connection: Bluetooth 5.0 app display
• Charging interface: USB-C / Type C
• Input voltage: 5V
• Input current: 200-300mA
• Battery: 3.7V 200mAh LiPo
• Working voltage: 3.4-4.2V
• Working current: less than 10mA
• Low-voltage alert: below 3.4V, red flash
• Size: 45x12x80mm
• Weight: 53g
• Material: aluminum / metal
• Color: black

These are genuine replacement scale pads for the SKYRC SCWS2000 Wireless Corner Weight System. Choose a 1-pack or 2-pack depending on how many pads you need (single or two replacement/spares). Great if you lost a pad, damaged one in your pit bag, or want extras for race travel. Pads pair to the RC Gears app the same way as the original system, and the app lets you assign each pad to any corner position.

Battery is included - each pad ships with a new CR2450 installed so it is ready to use out of the box.

What is included:

• 1x or 2x SKYRC SCWS2000 replacement scale pad(s) (based on your selection)
• 1x or 2x CR2450 battery/batteries (installed, based on your selection)

Important notes:

• Compatible with SKYRC SCWS2000 only
• This listing is for replacement pad(s) only - not a complete 4-corner scale kit
• RC Gears app and an existing SCWS2000 system are required to use these pads