Discover unparalleled precision in RC motor analysis with the SKYRC Brushless Motor Analyzer. This state-of-the-art tool is an essential for any RC enthusiast, designed to deliver comprehensive insights into your motor's performance. Whether you're a professional racer or a hobbyist, this analyzer caters to your needs by measuring vital parameters including KV value, RPM, current draw, and motor timing with exceptional accuracy.

• Measures KV (RPM per Volt), RPM, voltage (U), and current (I) with precision, enabling you to optimize your motor's performance.
• Advanced motor timing analysis, ranging from 0 to 70 degrees, helps in fine-tuning your motor for peak efficiency.
• Noise level detection from 60dB to 120dB, assessing motor health and identifying potential issues with bearings or rotor balance.
• Phase A, B, and C Sensor Timing, showing the actual timing of sensor elements, crucial for sensored motors.
• Compact and user-friendly design with a clear 2x16 character LCD screen, providing real-time data in an easy-to-read format.

With the SKYRC Brushless Motor Analyzer, fine-tune your motor to achieve the best performance on the track or in the air. Its robust build, comprehensive features, and high accuracy make it an indispensable tool in your RC gear. Enhance your RC experience with precision, ease, and confidence!

Practice without timing is mostly guesswork. The new tires feel faster, the car feels planted, and then somebody with a stopwatch politely ruins your afternoon. The SKYRC LapWiz Smart RC Lap Timing System replaces the guessing with real lap times, using infrared timing that needs no buried loop wire and no changes to the track at all.

Setup takes a couple of minutes. Plug the T01 transponder into a spare receiver channel on your RC car, put the timing unit on the aluminum tripod, aim it at the start/finish line, and connect over Bluetooth in the free SKYRC app for iOS and Android. Detection range is about 3-10m, and the magnetic sun visor snaps on to keep low sun out of the sensor on outdoor tracks. Two AA batteries run the timing unit for up to 300 hours of race time, which is more practice than most of us manage in a season.

The app is where it earns its keep. Practice, Qualifying, Race and Free Run modes cover everything from a solo evening to a club event with up to 99 cars, with real-time ranking, driver profiles, voice lap announcements and QR code race joining. Shadow Run is the one you will use most: it runs your current lap against your own best lap or a saved session with live delta feedback, so a camber change or a gearing change gets an honest answer instead of a hopeful one. Sessions save on your phone, back up to the cloud if you want them to, and the race screen can be cast to a TV over AirPlay or Android screen casting.

Worth knowing before you buy: this is a self-contained infrared system, so it works with LapWiz transponders and does not connect to a track's buried-loop personal transponder setup. One transponder is included and every extra car needs its own - the T02 enhanced, T04 battery-powered and T03 Mini-Z transponders are sold separately, and Mini-Z or other compact chassis need the T03. You will also need a phone or tablet, because the timing unit has no screen of its own.

Quick specs:

• Timing method: infrared
• Detection range: about 3-10m with the included T01 transponder
• Cars timed at once: up to 99
• Race modes: Practice, Qualifying, Race, Free Run
• Training mode: Shadow Run against your own best lap or a saved session, with live delta feedback
• Race viewing: cast the race screen to a TV over AirPlay or Android screen casting
• Timing unit power: 2 x AA batteries, up to 300 hours of race time
• Timing unit dimensions: 55x26x65mm
• Timing unit weight: 45g
• Mounting: 1/4 inch tripod thread; adjustable aluminum tripod included
• Sun visor: detachable magnetic visor for outdoor use
• Config port: JR/Futaba female socket on the timing unit for setting transponder IDs
• Status LEDs: blue for Bluetooth state, white for a valid lap detection
• Operating temperature: -5C to 60C
• Included T01 transponder: JR/Futaba connector, DC 3-15V input, 20x17x7mm, 7g, 245mm controller cable, 180mm emitter cable, indoor and outdoor tracks
• Optional T02 enhanced transponder, sold separately: dual infrared emitters, JR/Futaba, DC 3-15V, 4-10m range, 8.5g
• Optional T03 Mini-Z transponder, sold separately: JST-ZH 1.5mm 4-pin for the Mini-Z ICS port, 5m range, 15x14x6mm, 1.5g, indoor tracks
• Optional T04 battery-powered transponder: sold separately
• In the box: timing unit, detachable sun visor, T01 standard transponder, aluminum tripod, quick start guide, AA batteries
• Also needed: one transponder per car, and a phone or tablet to run the app

Knowledge is power! By knowing the facts before and after modifications, your efforts will not be in vain. GNSS Performance Meter will help you make sense of the improvements and help you make educated decisions to make sure you’re not spinning your wheels. For everyone trying to gauge their performance, here's an affordable way to do just that. Just got some new mods installed? Get some real feedback, really quickly. This is a professional-grade instrument accessible to enthusiasts. It’s every modeler’s dream. Enjoy!

Improved accuracy by tracking two satellite constellations
The GNSS Performance Analyzer supports GNSS(Global Navigation Satellite System) with GPS and GLONASS system that means more satellites are orbiting the earth. The advantage of this many satellites will definitely improve positional accuracy by tracking two satellite constellations instead of just GPS.

Small but Versatile
GNSS Performance Analyzer（GSM020) allows you to measure and analyze many aspects of your RC car & airplane’s performance using the latest GNSS engine (GPS, GLONASS) which gives you Acceleration, G-force, Speed, Time, Distance, High and Vertical Velocity. With its compact dimension of 40mm x 40mm x 17mm and internal antenna, it is an ideal choice for mounting on RC vehicles & airplanes.

Case Size: 40 x 39 x 16mm Weight: 38g

Peace of mind with built-in liPo battery
The 5 hours' up-time on the built-in rechargeable LiPo battery can give enough racing time to RC drivers or pilots in the field! With the micro USB charging port, it is very convenient to connect it to a USB port or another compatible USB power source for charging.

The GNSS PA App software automatically charts slope on as time elapses. Saved runs can be read by the App, allowing analyzing of average speed, maximum speed, and acceleration within the given time and defined distance. You can also define your own performance windows for measuring braking time, acceleration (e.g., 0-30 km/h, 10-50 km/h, 10 meters or any custom setting), G-force measurement, Max Speed, Average Speed, Distance, High and Vertical Velocity.

The meter can also be used as a speedometer and provides accurate logging of speed data.

The meter measures average speed，maximum speed，time elapsed，distance and altitude.

Visual LED indicator
The GNSS Analyzer is equipped with 3 LED indicators, signaling different operating modes. Open GNSS PA on the smartphone, the analyzer’s Bluetooth icon will stay steady blue, reflecting the device is connected; the satellite icon will stay steady green after a while of successful GNSS signal acquisition.

Built-in 1M Memory
The built-in 1M memory can record up to 50 records. And all the data can be transferred to the smartphone for analyzing! When the Flash is full, the previous record will be replaced automatically. Now you don't have to think about clearing data all the time or worry about missing the critical tracking data when the memory is full.

Cold nitro starts are where starter boxes go to question their life choices. The SKYRC Engine Heater pre-warms .19-.26 RC nitro engines so the piston, sleeve, con-rod and crank are treated a bit less rudely during warm-up.

Powered from a 12V DC source, this compact 90W nitro engine preheater brings the engine up to approximately 60-70C in around 10 minutes, depending on ambient temperature. MCU-controlled heating, a built-in temperature sensor, low voltage cutoff and an automatic safety timer keep the process simple instead of turning pit prep into a small electrical opera.

The adjustable fireproof and heat-resistant cover fits over the engine head, while the top access port lets you check engine temperature without constantly removing the heater. It is especially useful for break-in and cold-day starts on compatible RC nitro cars, buggies, trucks and truggies using .19-.26 engines. Power source required.

SKYRC Part Number: SK-600066.

SKYRC Thermologger Duo is a temperature data logger designed for RC enthusiasts who need accurate monitoring of motors, batteries, and electronic speed controllers. It features dual external temperature sensors, enabling real-time measurement of two separate points in your setup. A built-in Bluetooth module connects to the SKYRC mobile app (available for iOS and Android), allowing users to observe live readings, record data, and analyze temperature trends over time.

This device helps identify potential overheating issues, optimize battery health, and improve overall RC performance by providing a clear view of how components heat up under load. With adjustable sampling rates and an onboard memory, it offers flexibility in how frequently data is captured and stored. The compact design allows for easy placement within a variety of remote control models, including cars, boats, and aircraft.

Key Specifications and Features:

• Dual External Sensors: Measures temperatures at two separate points, such as a motor and a battery pack, or an ESC and ambient conditions.
• Bluetooth Connectivity: Pairs with the SkyRC Thermologger app, allowing users to view live data, configure settings, and retrieve logged information.
• Data Logging and Analysis: Records temperature readings for later review, assisting in problem diagnosis and performance tuning.
• Compact Form Factor: Designed for minimal space usage in RC vehicles, with mounting options that accommodate various chassis layouts.
• User-Configurable Sampling: Offers adjustable intervals for temperature recording, enabling detailed tracking or extended run times.
• App-Based Interface: All controls, graphs, and temperature logs are accessed through the mobile application. There is no onboard display, keeping the device lightweight and streamlined.