HobbyStar Turbo-Ventilator fans move a tremendous amount of air to aid in cooling high-power systems.  Durable machined-billet housing not only looks great but ensures reliable operation.

Specifications:

• Operating Voltage: 5.0V to 8.5V
• Size: 50mm x50mm x 15mm
• Mounting holes: 56mm apart (measured diagonally, hole-center to hole-center)
• RPM @ 8.5V: 10,000
• Current at 8.8V: < 0.5A
• Plug: BEC style 2-pin (fits all standard receivers)

NOTE: Does not come with mounting screws.

HobbyStar fan adapters are a clever way of attaching a fan directly and securely to your brushless motor.

Set of 2 brackets for mounting one fan. 

Includes mounting screws for fan.

• 36mm:
  • Mounting holes are spaced 23.5mm apart from each other.
  • Fits 36mm can motors (most 1/10 motors cans measure 36mm, cans with finned-design may add to that diameter).
• 40mm:
  • Mounting holes are spaced 32mm apart from each other.
  • Fits 40mm can motors (most 1/8 motors cans measure 40mm, cans with finned-design may add to that diameter, these still work on top of fins).

HobbyStar Turbo-Ventilator fans move a tremendous amount of air to aid in cooling high-power systems.  Durable machined-billet housing not only looks great but ensures reliable operation.

Specifications:

• Operating Voltage: 5.0V to 8.5V
• Size: 35mm x35mm x 10mm
• Mounting holes: 40mm apart (measured diagonally, hole-center to hole-center)
• RPM @ 8.5V: 20,000
• Current at 8.8V: < 0.5A
• Plug: BEC style 2-pin (fits all standard receivers)

NOTE: Does not come with mounting screws.

HobbyStar Turbo-Ventilator fans move a tremendous amount of air to aid in cooling high-power systems.  Durable machined-billet housing not only looks great but ensures reliable operation.

Specifications:

• Operating Voltage: 5.0V to 8.5V
• Size: 40mm x40mm x 10.5mm
• Mounting holes: 45mm apart (measured diagonally, hole-center to hole-center)
• RPM @ 8.5V: 16,000
• Current at 8.5V: < 0.5A
• Plug: BEC style 2-pin (fits all standard receivers)

NOTE: Does not come with mounting screws.

The SKYRC twin motor cooling fan with housing fits 1/5 scale motor with diameter of 55/56mm and power connector can plug directly into any open channel of the receiver or BEC, it can reduce the temperature of the motor quickly and get the motor as cool as possible. Pushing your 1/5 scale car to the limit! The SKYRC twin motor cooling fan with housing fits 1/5 scale motor with diameter of 55mm and power connector can plug directly into any open channel of the receiver or BEC, it can reduce the temperature of the motor quickly and get the motor as cool as possible. Pushing your 1/5 scale car to the limit!

Features:

• Fan housing made of heat-resisting material
• Twin super big cooling fans with high rotation speed and good airflow
• Reasonable design with most cooling efficiency
• Easy to install and remove
• Two zip ties for easy and firm fastening

1. Fasten the fan to the motor with two zip ties.
2. Connect the power connector of the fan to any open channel of the receiver or to BEC. (Note: There is positive and negative polarity of the connector and make sure to connect it correctly.)
3. Once the system is powered on, the fan is working.

Specifications:

• Weight : 65g
• Input Voltage : 5-7.4V
• Cooling Fan : Twin 40x40x10mm with 500mm Length Cable and JR Male Connector
• Zip Ties Length : 250mm
• Suitable Motor Size : 55/56mm diameter, 90mm and longer

HobbyStar Turbo-Ventilator fans move a tremendous amount of air to aid in cooling high-power systems.  Durable machined-billet housing not only looks great but ensures reliable operation.

Specifications:

• Operating Voltage: 5.0V to 8.4V
• Size: 30mm x30mm x 10.5mm
• Mounting holes: 34mm apart (measured diagonally, hole-center to hole-center)
• RPM @ 8.4V: 22,000 - 24,000
• Current at 8.4V: < 0.5A
• Plug: BEC style 2-pin (fits all standard receivers)

NOTE: Does not come with mounting screws.

HobbyStar Turbo-Ventilator fans move a tremendous amount of air to aid in cooling high-power systems.  Durable machined-billet housing not only looks great but ensures reliable operation.  Direct-fit for HobbyStar 1/10 Competition-Series ESC's.

Specifications:

• Operating Voltage: 5.0V to 8.4V
• Size: 30mm x30mm x 10.5mm
• Mounting holes: 34mm apart (measured diagonally, hole-center to hole-center)
• RPM @ 8.4V: 28,000
• Current at 8.4V: < 0.5A
• Plug: HobbyStar ESC (2-pin)

NOTE: Does not come with mounting screws.

HobbyStar Turbo-Ventilator fans move a tremendous amount of air to aid in cooling high-power systems.  Durable machined-billet housing not only looks great but ensures reliable operation.

Specifications:

• Operating Voltage: 5.0V to 8.5V
• Size: 25mm x25mm x 10mm
• Mounting holes: 28mm apart (measured diagonally, hole-center to hole-center)
• RPM @ 8.5V: 32,000
• Current at 8.8V: < 0.5A
• Plug: JST 2-pin 

NOTE: Does not come with mounting screws.

Cooling fan for Leopard BL5 or Hobbywing Max5 ESC.  Measures 45x45x11.2mm, operates on 6V.

Cooling fan for Leopard WP-BL-160A or Hobbywing Max6 ESC.  Measures 35x35x10.4mm.

Machined aluminum fan cover for HobbyStar 30mm fans, includes mounting screws.

Carbon Fiber fan cover for HobbyStar 40mm fans, includes mounting screws.