HobbyStar driver sets are crafted with lightweight aluminum handles that feature a knurled surface that provides excellent grip on the tool during use.  An aluminum plug on the end further protects your hands during use and is also removable, allowing you to use the handle for storage of small items. Each driver has the size etched into the handle for easy identification, as well as unique lines on the top of each handle for quick ID in any position. The precision-cut, hardened tips fit fasteners snugly to avoid stripping out and are coated with a titanium nitrate that not only looks great but protects the tips from wear and corrosion.

• Metric Hex Driver Sizes: 1.5mm  2mm  2.5mm 3mm
• Ball End Metric Hex Driver Sizes:  1.5mm  2mm  2.5mm  3mm
• SAE Hex Driver Sizes:  0.05"  1/16"  5/64" 3/32"
• Metric Nut Driver Sizes:  4mm  5.5mm  7mm  8mm
• SAE Nut Driver Sizes:  3/16"  1/4"(x2)  11/32"
• Screwdriver Sizes:  3mm Flat  3mm Phillips  5mm Flat  5mm Phillips

A must-have for RC hobbyists to track the temperatures.

Now you can take temperature measurement at a safe distance with SkyRC ITP380. RC hobbyists will never get burned or air blowing in your face from the RC vehicles, engines, motors, chargers, etc., while taking measurements.

You can trust SkyRC ITP380 to get accurate temperature readings from a safe distance, wherever indoor or outdoor.

SkyRC has engineered the ITP380 temperature measuring with accuracy down to the 0.1 °F and the object temperatures ranging from -40°F (-40°C) to 716°F (380°C).

SKYRC part number SK-500037

Monitoring the temperature of your electronics is one of the most critical steps of setting up any system and the key to long-lasting electronics.  You can eliminate the guessing with the HT-188 Infrared Laser Thermometer from Hobbystar. Ergonomic design and built-in laser pointer provide quick, precise temperature readings of motors. ESC's, servos etc.  Easy to read color display.

Features:

• Laser pointer eliminates guessing
• Color display
• Selectable between C and F
• Data hold
• Low-battery indication
• Auto-power off
• Selectable between C and F

Specifications:

• Temp Range: -50C~380C /  -58F~716F
• Temp Accuracy: +/- 2%
• Emissivity: Adjustable from 0.1-1.0
• Distance to Spot ratio: 13:1
• Response time and Wavelength: <1s
• Power: 9V battery (included)

• The HobbyStar Carbon Solder Jig is a small and lightweight tool designed to quickly and easily hold your wires, Deans, XT60 and bullet connectors to make convenient work of your soldering needs.
• Featuring a spring loading sliding movement, the jig opens up when compressed allowing you to insert your wires or connectors. When compression is released, the spring loaded bottom plate pulls back with clamping force, providing a secure hold while you work.
• The jig features a rectangular 17x10mm slot that securely fits Deans/T-Style and XT60 sized connectors, as well as two 8mm holes to fit the bullet connector of your choice. If you just need to solder or tin wires, the vertical posts open up to 10mm providing plenty of space for a variety of wire AWG's. To keep the jig planted, four rubber feet on the bottom keep it from moving around while you work.
• Weight: 55g Dimension: 70x60x30mm Material: Carbon Fiber
• Warning: Carbon Fiber conducts electricity! Never insert two bullet connectors from a battery into the 8mm bullet holes at the same time!

Heat problems usually introduce themselves right before something expensive stops being a component and becomes a lesson. The SKYRC iTV500 Mini HeatVision gives RC drivers a pocket-size way to see surface temperature instead of guessing by touch, smell, or that tiny voice saying "probably fine."

Designed for RC tuning and troubleshooting, this compact thermal imager helps you check motors, engines, ESCs, battery packs, connectors, tires, and other RC model surfaces without contact. The 32 x 24 FIR sensor, 1.83" capacitive touchscreen, and automatic hot/cold spot marking make it easy to spot abnormal heat during setup, testing, or pit work.

Adjustable emissivity from 0.01 to 1.00 helps match readings to different materials, while White Hot, Ironbow, and Rainbow palettes let you view heat in the format that makes sense for the job. It is USB-C rechargeable, weighs about 38g, and measures from -20°C to 300°C with ±2.0°C accuracy under proper conditions.

For high accuracy, stay within 20cm of the target and treat low-emissivity surfaces like bare metal as recommended.

SKYRC part number SK-500047

A high-quality power driver to give your wrist a break!  The powerful motor makes easy work of removing and installing fasteners. Built-in battery charges via USB plug, and an integrated LED Light illuminates your work in low light.  Includes 4 titanium-nitrate coated hex-tips, all in a handy carrying case.

Specifications:

• Battery: Li-Ion 3.6V, 900mAh
• Included Tips: 1.5mm, 2.0mm, 2,5mm and 3.0mm hex
• RPM: (280RPM (no-load)
• Torque: 2Nm (10Nm manual)
• Chuck: 6.35mm hex (1/4")
• Operating Time: 40 minutes
• Charge Time: 60 minutes
• Charging: 5V Micro-pin USB 
• Weight: 150g

Flux is essential for creating clean solder joints with good penetration. Amtech flux is made in the USA.10cc syringe.

One roll of 60/40 rosin-core solder in 1.0mm diameter, 12.5g (0.5 oz).

Monitoring the temperature of your electronics is one of the most critical steps of setting up any system and the key to long-lasting electronics and you can eliminate the guessing with the HT-101 Infrared Thermometer from Hobbystar. Ultra-compact design lets you slip it in your pocket and have it handy for quick, precise temperature readings of motors. ESC's, servos etc.  They even throw in an extra set of batteries!

Features:

• Selectable between C and F
• Data hold
• Low-battery indication
• Auto-power off
• Compact design with built-in clip

Specifications:

• Temp Range: -50C~260C /  -58F~500F
• Temp Accuracy: +/- 2%
• Emissivity: 0.95
• Distance to Spot ratio: 1:1
• Response time and Wavelength: 500ms & (8-14)um
• Power: 2x 1.5V LR44 button battery
• Dimensions: 18x90mm
• Weight: 20g

Solder sucker is an easy way to remove excess solder, body unscrews to allow easy removal of solder from the inside of tool body.

Power driver bit with standard 1/4" drive end for use with Hobbystar Power Screwdriver and in common electric screwdrivers. TiNi coated.

• Tip sizes: 1.5mm  2.0mm  2.5mm  3.0mm

RC cars have a special talent for collecting dust, sand, grass, and suspicious bits of track debris in places that seem specifically designed to be annoying. The SKYRC RC AirDuster is the tidy answer to that problem - a cordless blower built for proper RC cleanup, quick drying after wet runs, and cooling motors and ESCs between heats without dragging out a compressor or wasting canned air.

It is powerful in a very practical way. The brushless motor spins up to 80,000 RPM, the trigger is stepless, and you get 6 speed levels plus cruise mode, which means you can go from "gentle around electronics" to "remove half the parking lot from the chassis" without much drama. It feels more like a tool and less like one of those gadgets that looked clever online and then spent the rest of its life in a drawer.

The rest of it is equally sensible. Dual 21700 Li-ion cells give it 8000mAh total capacity, USB-C charging keeps life simple, and the compact 145x120x45mm body weighs about 340g, so it is easy to toss in a pit box and forget about until the moment you are very glad you brought it. Which is, in fairness, exactly what good tools are supposed to do.