HobbyStar aircraft ESC's are top-of the line, full-featured ESC's at a competitive price.  Constructed using only the highest-quality components and are encased in a beautifully machined heatsink housing to help keep operating temperatures in check.  The integrated switch-mode BEC allows you to power your servos and receiver without the added complexity and weight of a separate BEC.  Specifically designed for higher-current applications to eliminate the possibility of unwanted shutdowns they are capable of supporting simultaneous multiple current loads as found in large scale airplanes and CCPM equipped large-scale 3D helis.  Includes mounting bracket for clean, sturdy installation that still permits ESC to be removed if necessary.

Features:

• Data logging system such as temperature, voltage, current, and RPM
• SBEC Voltage Output 5.0, 6.0, 7.4, and 8.4V
• Advanced Governor Mode and soft start
• High SBEC Current Output, continuous 8A and burst 16A
• Power arm protection, over-heat protection, low-voltage protection and lost-signal protection
• Secondary sub-menu setting by the LCD program card or your PC
• Super smooth and accurate throttle linearity
• Support for most motors, including high RPM motors
• Programmable motor timing
• Utilizes new smaller MOSFET technology to minimize weight
• Aluminum finned heat sink
• Programmable throttle input range

Specifications:

• Current: 155A Continuous, 200A burst (10s)
• Input: 5-18NiCd/2-6S LiPo
• BEC Output: 5.0V, 6.0V 7.4V or 8.4V selectable @ 8A
• Dimensions: 65x46x17mm
• Weight: 126g

HobbyStar aircraft ESC's are deisgned to deliver reliable power at an affordable price-point.  High grade components deliver extremely low internal resistances to maximize efficiency, reduce operating temps and deliver the maximum power to your aircraft.  A full-featured ESC that can be used out of the box with simple calibration, yet also contain multiple adjustable parameters to dial in to your specific application.  Program using your transmitter or quickly make changes using the optional program card.  Built-in BEC for supplying your receiver and servos without the need for a separate battery.

Features:

• Built-in SBEC
• Extremely low internal resistance
• Power arming protection prevents motor from being accidentally turned on 
• Automatically cuts power to motor if signal is lost
• Supports high RPM motors
• Fully programmable
• Ultra smooth and linear throttle curve

Specifications:

• Output: 80A continuous, 90A burst
• Input Voltage: 2-6S LiPo, 5-18 cell Ni-XX
• SBEC output: 5.5V/5A (switching)
• Weight: 87g
• Dimensions" 68x37x17mm

Programmable Options:

• Brake setting (on/off -- default: off)
• Battery type: (Ni-XX/LiPo -- default: LiPo auto detect)
• Low voltage cutoff setting (2.8V 50% / 3.0V 60% / 3.2V 65%  -- default: 3.0V)
• Factory default setup reset
• Timing settings (Auto 7-30° / Low 7-22° / High 22-30° -- default: auto)
• Acceleration (Soft / Normal / Hard -- default: soft)
• Governor mode (RPM off / Heli Mode 1 / Heli Mode 2 -- default: RPM off)
• Motor rotation (forward / reverse -- default: forward)
• PWM/Switching Frequency (8KHz / 16KHz -- default: 8KHz)

HobbyStar aircraft ESC's are deisgned to deliver reliable power at an affordable price-point.  High grade components deliver extremely low internal resistances to maximize efficiency, reduce operating temps and deliver the maximum power to your aircraft.  A full-featured ESC that can be used out of the box with simple calibration, yet also contain multiple adjustable parameters to dial in to your specific application.  Program using your transmitter or quickly make changes using the optional program card.  Built-in BEC for supplying your receiver and servos without the need for a separate battery.

Features:

• Built-in SBEC
• Extremely low internal resistance
• Power arming protection prevents motor from being accidentally turned on 
• Automatically cuts power to motor if signal is lost
• Supports high RPM motors
• Fully programmable
• Ultra smooth and linear throttle curve

Specifications:

• Output: 70A continuous, 80A burst
• Input Voltage: 2-6S LiPo, 5-18 cell Ni-XX
• SBEC output: 5.5V/5A (switching)
• Weight: 85g
• Dimensions" 68x37x17mm

Programmable Options:

• Brake setting (on/off -- default: off)
• Battery type: (Ni-XX/LiPo -- default: LiPo auto detect)
• Low voltage cutoff setting (2.8V 50% / 3.0V 60% / 3.2V 65%  -- default: 3.0V)
• Factory default setup reset
• Timing settings (Auto 7-30° / Low 7-22° / High 22-30° -- default: auto)
• Acceleration (Soft / Normal / Hard -- default: soft)
• Governor mode (RPM off / Heli Mode 1 / Heli Mode 2 -- default: RPM off)
• Motor rotation (forward / reverse -- default: forward)
• PWM/Switching Frequency (8KHz / 16KHz -- default: 8KHz)

HobbyStar aircraft ESC's are deisgned to deliver reliable power at an affordable price-point.  High grade components deliver extremely low internal resistances to maximize efficiency, reduce operating temps and deliver the maximum power to your aircraft.  A full-featured ESC that can be used out of the box with simple calibration, yet also contain multiple adjustable parameters to dial in to your specific application.  Program using your transmitter or quickly make changes using the optional program card.  Built-in BEC for supplying your receiver and servos without the need for a separate battery.

Features:

• Built-in SBEC
• Extremely low internal resistance
• Power arming protection prevents motor from being accidentally turned on 
• Automatically cuts power to motor if signal is lost
• Supports high RPM motors
• Fully programmable
• Ultra smooth and linear throttle curve

Specifications:

• Output: 60A continuous, 70A burst
• Input Voltage: 2-6S LiPo, 5-12 cell Ni-XX
• SBEC output: 5.5V/5A (linear)
• Weight: 60g
• Dimensions" 55x30x13mm

Programmable Options:

• Brake setting (on/off -- default: off)
• Battery type: (Ni-XX/LiPo -- default: LiPo auto detect)
• Low voltage cutoff setting (2.8V 50% / 3.0V 60% / 3.2V 65%  -- default: 3.0V)
• Factory default setup reset
• Timing settings (Auto 7-30° / Low 7-22° / High 22-30° -- default: auto)
• Acceleration (Soft / Normal / Hard -- default: soft)
• Governor mode (RPM off / Heli Mode 1 / Heli Mode 2 -- default: RPM off)
• Motor rotation (forward / reverse -- default: forward)
• PWM/Switching Frequency (8KHz / 16KHz -- default: 8KHz)

HobbyStar external BECs are specifically designed for demanding applications and therefore have the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns. Simple to install and easily adjustable via push-button and LED indicators, HobbyStar BEC's provide peace of mind.

• Regulator Type: Switching
• Output: 5.0V, 5.5V, 6.0V, 6.5V, 7.0V, 8.0V (Output voltage is changeable by pressing a button)
• Input: 7V-60V (2-14S Lipo, 6-50 NiMH/NiCd)
• Output Current: Continuous Current 12A, Burst Current 18A for 10 seconds
• Size: 60mm x 34mm x15mm (LxWxH)
• Weight: 51g

HobbyStar aircraft ESC's are deisgned to deliver reliable power at an affordable price-point.  High grade components deliver extremely low internal resistances to maximize efficiency, reduce operating temps and deliver the maximum power to your aircraft.  A full-featured ESC that can be used out of the box with simple calibration, yet also contain multiple adjustable parameters to dial in to your specific application.  Program using your transmitter or quickly make changes using the optional program card.  Built-in BEC for supplying your receiver and servos without the need for a separate battery.

Features:

• Built-in SBEC
• Extremely low internal resistance
• Power arming protection prevents motor from being accidentally turned on 
• Automatically cuts power to motor if signal is lost
• Supports high RPM motors
• Fully programmable
• Ultra smooth and linear throttle curve

Specifications:

• Output: 50A continuous, 60A burst
• Input Voltage: 2-6S LiPo, 5-12 cell Ni-XX
• SBEC output: 5.5V/5A (switching)
• Weight: 58g
• Dimensions" 55x30x13mm

Programmable Options:

• Brake setting (on/off -- default: off)
• Battery type: (Ni-XX/LiPo -- default: LiPo auto detect)
• Low voltage cutoff setting (2.8V 50% / 3.0V 60% / 3.2V 65%  -- default: 3.0V)
• Factory default setup reset
• Timing settings (Auto 7-30° / Low 7-22° / High 22-30° -- default: auto)
• Acceleration (Soft / Normal / Hard -- default: soft)
• Governor mode (RPM off / Heli Mode 1 / Heli Mode 2 -- default: RPM off)
• Motor rotation (forward / reverse -- default: forward)
• PWM/Switching Frequency (8KHz / 16KHz -- default: 8KHz)

HobbyStar external BECs are specifically designed for demanding applications and therefore have the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns. Simple to install and easily adjustable, HobbyStar BEC's provide peace of mind.

• Output: 5.0V/6A, 5.5V/6A, or 6.0V/6A  (changeable with jumper)
• Input Voltage: 6V-25V (2-6s LiPo; 5-18 cell Ni-XX
• Output Current: 6A Continuous, 10A Burst
• Weight: 18g
• Dimensions: 45 x 23 x 10mm

HobbyStar external BECs are specifically designed for demanding applications and therefore have the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns. Simple to install and easily adjustable, HobbyStar BEC's provide peace of mind.

• Output: 5V/3A or 6V/3A  (changeable with jumper)
• Input Voltage: 6V-25V (2-6s LiPo; 5-18 cell Ni-XX)
• Output Current: 3A Continuous, 8A Burst
• Weight: 7g
• Dimensions: 30 x 9 x 6mm