Heat problems usually introduce themselves right before something expensive stops being a component and becomes a lesson. The SKYRC iTV500 Mini HeatVision gives RC drivers a pocket-size way to see surface temperature instead of guessing by touch, smell, or that tiny voice saying "probably fine."

Designed for RC tuning and troubleshooting, this compact thermal imager helps you check motors, engines, ESCs, battery packs, connectors, tires, and other RC model surfaces without contact. The 32 x 24 FIR sensor, 1.83" capacitive touchscreen, and automatic hot/cold spot marking make it easy to spot abnormal heat during setup, testing, or pit work.

Adjustable emissivity from 0.01 to 1.00 helps match readings to different materials, while White Hot, Ironbow, and Rainbow palettes let you view heat in the format that makes sense for the job. It is USB-C rechargeable, weighs about 38g, and measures from -20°C to 300°C with ±2.0°C accuracy under proper conditions.

For high accuracy, stay within 20cm of the target and treat low-emissivity surfaces like bare metal as recommended.

SKYRC part number SK-500047

Light your pit the way racers actually work - bright, soft, and adjustable. The SKYRC LED Pit Light V2 delivers 180–600 lumens with six dimming steps and three color temperatures (3000K/3500K/4000K) so you can reduce glare on carbon and aluminum while still seeing tiny screws and solder joints. A foldable arm with around 270° rotation lets you aim light exactly where you need it, and touch-sensitive controls keep setup fast and clean at the bench.

Power it two ways: standard 6–15V DC (great with a pit supply) or USB 5V/2.1A when you want minimal wiring. Inside are 32 high-power LEDs that sip ≤11W yet output the equivalent of a much larger lamp. Compact and travel-ready, the V2 measures ~281×60×314.5 mm and weighs ~460 g, making it easy to pack for race day.

SKYRC part number SK-600089-01

RC cars have a special talent for collecting dust, sand, grass, and suspicious bits of track debris in places that seem specifically designed to be annoying. The SKYRC RC AirDuster is the tidy answer to that problem - a cordless blower built for proper RC cleanup, quick drying after wet runs, and cooling motors and ESCs between heats without dragging out a compressor or wasting canned air.

It is powerful in a very practical way. The brushless motor spins up to 80,000 RPM, the trigger is stepless, and you get 6 speed levels plus cruise mode, which means you can go from "gentle around electronics" to "remove half the parking lot from the chassis" without much drama. It feels more like a tool and less like one of those gadgets that looked clever online and then spent the rest of its life in a drawer.

The rest of it is equally sensible. Dual 21700 Li-ion cells give it 8000mAh total capacity, USB-C charging keeps life simple, and the compact 145x120x45mm body weighs about 340g, so it is easy to toss in a pit box and forget about until the moment you are very glad you brought it. Which is, in fairness, exactly what good tools are supposed to do.

A must-have for RC hobbyists to track the temperatures.

Now you can take temperature measurement at a safe distance with SkyRC ITP380. RC hobbyists will never get burned or air blowing in your face from the RC vehicles, engines, motors, chargers, etc., while taking measurements.

You can trust SkyRC ITP380 to get accurate temperature readings from a safe distance, wherever indoor or outdoor.

SkyRC has engineered the ITP380 temperature measuring with accuracy down to the 0.1 °F and the object temperatures ranging from -40°F (-40°C) to 716°F (380°C).

SKYRC part number SK-500037

A high-quality power driver to give your wrist a break!  The powerful motor makes easy work of removing and installing fasteners. Built-in battery charges via USB plug, and an integrated LED Light illuminates your work in low light.  Includes 4 titanium-nitrate coated hex-tips, all in a handy carrying case.

Specifications:

• Battery: Li-Ion 3.6V, 900mAh
• Included Tips: 1.5mm, 2.0mm, 2,5mm and 3.0mm hex
• RPM: (280RPM (no-load)
• Torque: 2Nm (10Nm manual)
• Chuck: 6.35mm hex (1/4")
• Operating Time: 40 minutes
• Charge Time: 60 minutes
• Charging: 5V Micro-pin USB 
• Weight: 150g

HobbyStar crimping pliers are incredibly heavy-duty and make quick work of crimping a variety of leads on 18-28AWG wire. They work well on connectors such as servo leads, balance leads, Molex type etc. There are a lot of cheap crimping pliers on the market that make this a frustrating task, HobbyStar pliers are the best you'll find at an incredible price!

Features:

• 4 different size crimping areas
• Ratcheting design allows you to lock in terminal first, and then insert wire
• Heavy-duty design for years of dependable use
  
• Large grips provide comfort

One of those tools you'll wonder how you lived without, the multi-function soldering jig makes easy work of holding some of the most popular connector styles to make soldering a much easier affair. 

Has cutouts for XT60 (M/FM), Dean's/T-Plug (M/FM), XT90 (M/FM), Mini-T (M/FM) and bullet connector slots from 2.4mm all the way to 10.4mm.

Durable machined aluminum with heat-resistant composite inserts.

Multi-Use shock pliers with a built-in 2.5mm tire punch.

The HobbyStar Shock Plier is an ingenious multi-tool that is much more than just a shock plier.  The ingenious design incorporates shock plier function with the capability to hold shock bodies, measure screw and shock-shaft length, press ball-ends on and off of cups and even function as a solder-jig and wrench.

Features:

• Beautifully CNC-machines and anodized in a durable black finish
• Cutouts for 3.0, 3.5 and 4.0mm shafts
• Multiple locations for shock bodies
• Cutouts for holding Dean's (T-plug) and XT60 plugs
• Holes from 2.0 to 7.8mm for holding a wide variety of bullet terminals during soldering
• 4.0 and 5.0mm openings on plier end to function as a wrench (great for turnbuckles)
• Press for installing and removing ball cups
• 2 different areas for measuring fastener and shock shaft length

High-quality wrench for removing and installing 17mm wheel nuts on 1/8 vehicles.  Machined, anodized aluminum. 

The HobbyStar 6-in-1 driver is a compact, easy way to carry the most commonly used drivers in the same space as one tool handle.  The lightweight handle features ribbing for positive grip, and all tips store inside and are held in place with a divider to keep the tips from rattling around in the handle.  An aluminum end-plug keeps them all secure, and a magnetic base inside the handle secures each tip while in use.  High-precision tips feature hardened surfaces for a secure fit that won't round out fasteners, and are coated with a brown finish that not only looks great but protects against corrosion.

Includes #0 phillips and #1 standard screwdriver tips, and 1.5, 2.0, 2.5 and 3.0mm hex drivers. Handle length is 105mm and assembled length is 155mm.

• The HobbyStar Carbon Solder Jig is a small and lightweight tool designed to quickly and easily hold your wires, Deans, XT60 and bullet connectors to make convenient work of your soldering needs.
• Featuring a spring loading sliding movement, the jig opens up when compressed allowing you to insert your wires or connectors. When compression is released, the spring loaded bottom plate pulls back with clamping force, providing a secure hold while you work.
• The jig features a rectangular 17x10mm slot that securely fits Deans/T-Style and XT60 sized connectors, as well as two 8mm holes to fit the bullet connector of your choice. If you just need to solder or tin wires, the vertical posts open up to 10mm providing plenty of space for a variety of wire AWG's. To keep the jig planted, four rubber feet on the bottom keep it from moving around while you work.
• Weight: 55g Dimension: 70x60x30mm Material: Carbon Fiber
• Warning: Carbon Fiber conducts electricity! Never insert two bullet connectors from a battery into the 8mm bullet holes at the same time!

A beautifully machined reamer with precise knurling for positive grip.  Make holes from 0-14mm with this handy body reamer and keep it protected with the included thread-on cap. Removable aluminum end-plug protects your hand and is removable to allow storage in handle.

Monitoring the temperature of your electronics is one of the most critical steps of setting up any system and the key to long-lasting electronics and you can eliminate the guessing with the HT-101 Infrared Thermometer from Hobbystar. Ultra-compact design lets you slip it in your pocket and have it handy for quick, precise temperature readings of motors. ESC's, servos etc.  They even throw in an extra set of batteries!

Features:

• Selectable between C and F
• Data hold
• Low-battery indication
• Auto-power off
• Compact design with built-in clip

Specifications:

• Temp Range: -50C~260C /  -58F~500F
• Temp Accuracy: +/- 2%
• Emissivity: 0.95
• Distance to Spot ratio: 1:1
• Response time and Wavelength: 500ms & (8-14)um
• Power: 2x 1.5V LR44 button battery
• Dimensions: 18x90mm
• Weight: 20g