39 products
39 products
Sort by:
The Leopard 5892 is a behemoth powerhouse for 1/5 and 1/4 vehicles and 1000mm-1800mm length boats. This one is a BEAST!!
Leopard motors are built using the highest grade components for outstanding performance and long life. The latest generation 4-pole rotors provide massive torque, and are Kevlar wrapped to ensure the magnets stay put at all RPM’s. All components are precision machined, balanced and hand-built to guarantee quality, and with an extensive product line including many sizes you just won’t find from other manufacturers you are sure to find a Leopard motor to fit your application.
Features:
- Precision machined aluminum housing
- Kevlar wrapped, 4-pole rotor
- Imported high-speed Japanese bearings
- Hand wound stator, using high-purity/high-temperature copper wire
- Excellent heat dissipation
1/5 scale vehicles require some serious horsepower and the HobbyStar 56112 1/5 scale motor delivers the power you need. With an industry leading 24 slot stator and a 4-pole precision-balanced, Kevlar-wrapped rotor riding on buttery-smooth ABEC5 bearings all housed in a beautifully CNC machined T6 6061 billet-aluminum housing you'll harness next-level power for your large-scale RC! Extra long 200mm motor leads with gold-plated terminals already installed make installation a snap.
Features:
- 4-Pole 24 Slot high-torque motor design
- CNC machined 6061 T6 billet aluminum heatsink can
- High purity copper windings maximize efficiency
- High RPM ABEC5 oversized bearings
- Universal fit with multiple M4 mounting holes
- Precision balanced Kevlar-wrapped rotor, smoothness for best reliability and maximum RPM
- Stator - Super thin (0.2mm) laminations
- Removable/Replaceable rotor
- Precision engineered for maximum energy conversion
The HobbyStar V3 160A is the higher-current 1/8 ESC in this Supersonic V2-style group. If you want more headroom than the 130A version for a heavier 1/8 build, this is the one to look at first: 160A continuous current, 1080A burst current, 3-6S LiPo support, IP67 waterproof design, dual XT90 battery plugs, and a compact aluminum heat-sink case.
The motor guideline steps up from 40xx-size to 42xx-size or smaller sensorless motors, which makes this the better fit for bigger 1/8 bashing and monster-truck setups. It still wants sensible gearing and motor KV, especially on 6S. More amps are helpful; they do not repeal thermodynamics, sadly.
The built-in BEC is switchable between 6.0V, 7.4V, and 8.4V at 6A, so you can feed standard or HV receiver/servo setups when the rest of the electronics support it. The ESC also includes motor overheat protection and the usual programmable surface ESC settings for throttle, cutoff, start/punch, brake, reverse, and thermal behavior.
Quick specs:
- Type: Waterproof sensorless brushless ESC
- Recommended scale/use: 1/8 RC cars, trucks, buggies, monster trucks, and compatible surface builds
- Continuous current: 160A
- Burst current: 1080A
- Input voltage: 3-6S LiPo / 9-18 cell NiMH
- BEC output: 6.0V/7.4V/8.4V, 6A switchable
- Battery connector: Dual XT90 plugs
- Motor type: Sensorless brushless
- Resistance: 0.00028 ohm
- 4S LiPo / 12-cell NiMH motor guideline: 42xx-size or smaller, under 3000KV on-road or under 2500KV off-road/buggy/monster
- 6S LiPo / 18-cell NiMH motor guideline: 42xx-size or smaller, under 2500KV on-road or under 2000KV off-road/buggy/monster
- Waterproof rating: IP67
- Protection features: Low-voltage protection, motor overheat protection, ESC thermal protection, throttle signal loss protection
- Cooling: Aluminum heat-sink case with removable/replaceable 30x30x10mm cooling fan
- Dimensions: 57.5x45x37mm
- Weight: 150g
- Electronic switch: Included
- Program card: Compatible, sold separately
The HobbyStar Affront 4268 is for 1/8 off-road buggies that need smooth sensored throttle control without jumping to a longer, heavier can. It is a 4-pole sensored brushless motor in a 68.7mm 4268-size case, with 1900KV, 2100KV, 2350KV, 2600KV, and 2800KV options and a 2400W rating.
The useful bits are all the usual things racers and serious builders actually care about: adjustable timing, a removable/replaceable rotor, 0.2mm stator laminations, high-temperature copper windings, oversized high-speed bearings, and a CNC 6061 T6 aluminum heat-dissipation shell. In plain English, it is built to run efficiently and stay tunable, not merely to look dramatic in the parts bin.
The off-road version uses a sealed can design with splashproof and dustproof protection for normal dirt-track and dusty RC use. It also gives you M3 and M4 mounting holes, a 5mm shaft, and a compact 320g weight. Match the KV to your battery, ESC, gearing, vehicle weight, and class rules; high KV plus optimism is still not a cooling system.
Quick specs:
- Type: Sensored brushless motor
- Recommended scale/use: 1/8 off-road buggy and compatible 1/8 surface RC builds
- Motor size code: 4268
- Available KV: 1900KV, 2100KV, 2350KV, 2600KV, 2800KV
- Max watts: 2400W
- Rotor poles: 4
- Max RPM: 50,000
- Motor size: 40.8mm body / 41.8mm with fins x 68.7mm
- Weight: 320g
- Shaft diameter: 5mm
- Extended shaft length: 19.5mm
- Mounting: M3 and M4 motor mounting holes
- Timing: Adjustable timing system
- Rotor: Removable/replaceable rotor
- Stator: 0.2mm steel laminations
- Windings: High-temperature copper windings
- Can design: CNC 6061 T6 aluminum heat-dissipation shell, sealed splashproof/dustproof off-road design
The HobbyStar 4585 motor is a behemoth powerplant for larger-scale applications such as the Traxxas Xmaxx/XO1 and any other application where an 1/8-sized motor is not enough and a 1/5 can is too large. 4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 85mm length make this the ultimate motor for your large-scale rig.
NOTE: Aftermarket mount is required for use in the Xmaxx as the stock motor uses a unique "pin" mounting system.
Features:
- Brushless, sensorless 4-pole motor
- 12-slot high-torque stator
- CNC machined 6061 T6 billet aluminum heatsink can
- High-purity copper windings maximize efficiency
- High-RPM ABEC5 oversized bearings
- Precision balanced rotor for smooth operation, reliability and maximum RPM
- Stator-Super Thin (0.2mm) laminations
- Removable/replaceable rotor
- Precision engineered for maximum energy conversion
The Leopard 4092 is a crazy long, crazy powerful motor. Can be used in anything from 1/8 vehicles, lightweight 1/5 scale rigs and large boats. Check your clearance before ordering!
Leopard motors are built using the highest grade components for outstanding performance and long life. The latest generation 4-pole rotors provide massive torque, and are Kevlar wrapped to ensure the magnets stay put at all RPM’s. All components are precision machined, balanced and hand-built to guarantee quality, and with an extensive product line including many sizes you just won’t find from other manufacturers you are sure to find a Leopard motor to fit your application.
Features:
- Precision machined aluminum housing
- Kevlar wrapped, 4-pole rotor
- Imported high-speed Japanese bearings
- Hand wound stator, using high-purity/high-temperature copper wire
- Excellent heat dissipation
The Leopard 4274 is an all new motor from Leopard for 1/8 monster trucks and truggies. This torque monster features sensored operation for smooth, reliable power delivery.
Leopard motors are built using the highest grade components for outstanding performance and long life. The latest generation 4-pole rotors provide massive torque, and are Kevlar wrapped to ensure the magnets stay put at all RPM’s. All components are precision machined, balanced and hand-built to guarantee quality, and with an extensive product line including many sizes you just won’t find from other manufacturers you are sure to find a Leopard motor to fit your application.
Features:
- Precision machined aluminum housing
- Kevlar wrapped, 4-pole rotor
- Imported high-speed Japanese bearings
- Hand wound stator, using high-purity/high-temperature copper wire
- Excellent heat dissipation
If your 1/8 car or truck needs a real 3-6S ESC without jumping straight into premium-brand money, the HobbyStar V3 130A is the sensible value pick. It is a sensorless brushless ESC rated for 130A continuous current and 860A burst current, with an IP67 waterproof design, aluminum heat-sink case, replaceable cooling fan, XT60 battery plug, and motor overheat protection.
The 130A is the lighter 1/8 option in this group. It is meant for 40xx-size or smaller sensorless motors, with lower KV limits for 6S and off-road/monster-truck use. For bashing, builders, and budget 1/8 projects, that is a useful lane: enough ESC for sane 1/8 setups, without paying for features you may never use.
The switchable BEC can output 6.0V, 7.4V, or 8.4V at 6A, so it can support standard or HV receiver/servo setups when the rest of the electronics are compatible. Programming support covers the normal surface ESC settings: throttle range, low-voltage protection, start/punch behavior, brake, reverse, and thermal protections.
Quick specs:
- Type: Waterproof sensorless brushless ESC
- Recommended scale/use: 1/8 RC cars, trucks, buggies, monster trucks, and compatible surface builds
- Continuous current: 130A
- Burst current: 860A
- Input voltage: 3-6S LiPo / 9-18 cell NiMH
- BEC output: 6.0V/7.4V/8.4V, 6A switchable
- Battery connector: XT60 plug
- Motor type: Sensorless brushless
- Resistance: 0.00035 ohm
- 4S LiPo / 12-cell NiMH motor guideline: 40xx-size or smaller, under 3000KV on-road or under 2500KV off-road/buggy/monster
- 6S LiPo / 18-cell NiMH motor guideline: 40xx-size or smaller, under 2500KV on-road or under 2000KV off-road/buggy/monster
- Waterproof rating: IP67
- Protection features: Low-voltage protection, motor overheat protection, ESC thermal protection, throttle signal loss protection
- Cooling: Aluminum heat-sink case with removable/replaceable 30x30x10mm cooling fan
- Dimensions: 57.5x45x37mm
- Weight: 126g
- Electronic switch: Included
- Program card: Compatible, sold separately
When too much is just enough, the HobbyStar 4092 is the motor you are looking for. At a full 92mm in length this is one of the longest and most powerful motor you can shoehorn into your 1/8 truck for ridiculous power (make sure to measure to see if you have the clearance!). 4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 82mm length make this the ultimate motor for your monster truck or truggy.
Features:
- Brushless, sensorless 4-pole motor
- 12-slot high-torque stator
- CNC machined 6061 T6 billet aluminum heatsink can
- High-purity copper windings maximize efficiency
- High-RPM ABEC5 oversized bearings
- Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
- Precision balanced rotor for smooth operation, reliability and maximum RPM
- Stator-Super Thin (0.2mm) laminations
- Removable/replaceable rotor
- Precision engineered for maximum energy conversion
HobbyStar V2 motors and ESC's now include built-in temperature monitoring and thermal protection to protect your valuable electronics. When paired with a compatible HobbyStar ESC, the user can set up the system to either reduce or completely cut off power if either the motor, or ESC temperature exceeds the programmed limit. Motors can be run without temperature port connected when paired with ESC's that do not offer temperature monitoring.
When too much is just enough, the HobbyStar 4292 is the motor you are looking for. At a full 92mm in length this is one of the longest and most powerful motors you can shoehorn into your 1/8 truck for ridiculous power (make sure to measure to see if you have the clearance!). 4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 68mm length make this the ultimate motor for your 1/8 truck or truggy.
Features:
- Built-in temperature sensor (must use with compatible ESC).
- Brushless, sensored 4-pole motor
- 12-slot high-torque stator
- CNC machined 6061 T6 billet aluminum heatsink can
- High-purity copper windings maximize efficiency
- High-RPM ABEC5 oversized bearings
- Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
- Precision balanced rotor for smooth operation, reliability and maximum RPM
- Stator-Super Thin (0.2mm) laminations
- Removable/replaceable rotor
- Precision engineered for maximum energy conversion
HobbyStar V2 motors and ESC's now include built-in temperature monitoring and thermal protection to protect your valuable electronics. When paired with a compatible HobbyStar ESC, the user can set up the system to either reduce or completely cut off power if either the motor, or ESC temperature exceeds the programmed limit. Motors can be run without temperature port connected when paired with ESC's that do not offer temperature monitoring.
When a standard 1/8 motor isn't enough, the HobbyStar 4082 brushless, sensorless motor is the ticket for your 1/8 truck for monster horsepower. 4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 68mm length make this the ultimate motor for your 1/8 truck or truggy.
Features:
- Built-in temperature sensor (must use with compatible ESC).
- Brushless, sensored 4-pole motor
- 12-slot high-torque stator
- CNC machined 6061 T6 billet aluminum heatsink can
- High-purity copper windings maximize efficiency
- High-RPM ABEC5 oversized bearings
- Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
- Precision balanced rotor for smooth operation, reliability and maximum RPM
- Stator-Super Thin (0.2mm) laminations
- Removable/replaceable rotor
- Precision engineered for maximum energy conversion
When a standard 1/8 motor isn't enough, the HobbyStar 4082 brushless, sensorless motor is the ticket for your 1/8 truck for monster horsepower. 4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 82mm length make this the ultimate motor for your monster truck or truggy.
Features:
- Brushless, sensorless 4-pole motor
- 12-slot high-torque stator
- CNC machined 6061 T6 billet aluminum heatsink can
- High-purity copper windings maximize efficiency
- High-RPM ABEC5 oversized bearings
- Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
- Precision balanced rotor for smooth operation, reliability and maximum RPM
- Stator-Super Thin (0.2mm) laminations
- Removable/replaceable rotor
- Precision engineered for maximum energy conversion
HobbyStar V2 motors and ESC's now include built-in temperature monitoring and thermal protection to protect your valuable electronics. When paired with a compatible HobbyStar ESC, the user can set up the system to either reduce or completely cut off power if either the motor, or ESC temperature exceeds the programmed limit. Motors can be run without temperature port connected when paired with ESC's that do not offer temperature monitoring.
A powerhouse motor for your 1/8 scale truck or truggy, the HobbyStar 4274 V2 brushless motor is the ideal powerplant for to supply your 1/8 scale vehicle with tire-shredding power. 4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 68mm length make this the ultimate motor for your 1/8 truck or truggy.
Features:
- Built-in temperature sensor (must use with compatible ESC).
- Brushless, sensored 4-pole motor
- 12-slot high-torque stator
- CNC machined 6061 T6 billet aluminum heatsink can
- High-purity copper windings maximize efficiency
- High-RPM ABEC5 oversized bearings
- Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
- Precision balanced rotor for smooth operation, reliability and maximum RPM
- Stator-Super Thin (0.2mm) laminations
- Removable/replaceable rotor
- Precision engineered for maximum energy conversion
HobbyStar V2 ESC's feature built-in temperature monitoring for both ESC and motor to help protect your valuable electronics. ESC and motor temperature protection parameters can be programmed individually via the HobbyStar V2 LED Program Card (must use a compatible HobbyStar motor for motor temperature features).
Waterproof design keeps you going through wherever your drive takes you, and a selectable 6.1V/5A or 7.4V/5A BEC keeps even the most power-hungry servos going strong.
ESC has 6.5mm female terminals for motor wires, includes pre-tinned plug-in motor leads for easy connection to your motor.
Features:
- Waterproof design
- Built-in fan
- Selectable 6.1V/5A or 7.4V/5A BEC
- Programmable ESC and motor thermal protection (must use compatible motor)
- Fully programmable via HobbyStar V2 LED Program Card
Specifications:
- Cont/Burst Current: 120A/860A
- Input: 3-6S LiPo, 9-18 Cell NiMh
- 4S LiPo, 12 Cell NiMh Motor Limit: 42XX or smaller, <3000KV On-road, 2500KV Off-road
- 6S LiPo, 18 Cell NiMh Motor Limit: 42XX or smaller, <2500KV On-road, 2000KV Off-road
- For 1/8 Scale Cars
- Resistance: 0.00035ohm
- BEC: 6.1V/5A or 7.4V/5A switch-mode
- Dimensions: 57.5x45x37mm
- Motor Connection: 6.5mm sockets (includes pre-tinned motor leads)
- Battery Plug: Dual XT60 (series)
- Weight: 132g
The same 1/8 scale powerhouse design as the HobbyStar 4076 sensorless motor, the HobbyStar 4274 adds a sensor to provide silky-smooth operation at all RPM's. Gold-plated solder tabs feature a concave design to hold solder in place for an easy, clean connection to motor.
With the power to throw your truck around like a toy, the HobbyStar 4274 brushless, sensored motor is the ideal powerplant for to supply your 1/8 scale vehicle with tire-shredding power. 4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 74mm length make this the ultimate motor for your monster truck or truggy.
Features:
- Brushless, sensored 4-pole motor
- 12-slot high-torque stator
- CNC machined 6061 T6 billet aluminum heatsink can
- High-purity copper windings maximize efficiency
- High-RPM ABEC5 oversized bearings
- Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
- Precision balanced rotor for smooth operation, reliability and maximum RPM
- Stator-Super Thin (0.2mm) laminations
- Removable/replaceable rotor
- Precision engineered for maximum energy conversion