High-quality aluminum servo horn features a clamping design to eliminate free-play and ensure a secure fit. Offset design is handy for applications requiring clearance, horn measures 11mm tall. Dual holes allow fitment in a wide variety of applications, end-holes are 16mm and 20mm from mounting hole (measured from hole-center to hole-center).

A handy tool for holding the flat end of ball joints and rod ends when installing onto turnbuckles.  For M3/M4 joints, one side opening measures 9mmx5mm and the other 10mmx4mm.  Machined, anodized aluminum. 

A simple to use tool that easily plugs into the balance lead of your LiPo battery and automatically displays total pack voltage and individual cell voltages. Adjustable alarm can be set to trigger when cell votage reaches pre-set limit.

Specifications:

• Use for 1-8S Lipo/Li-ion/LiMn/Li-Fe
• Voltage detection precision: +_0.01V
• Unit voltage display range: 0.5-4.5V
• Total voltage display range: 0.5-36V
• 1S test mode voltage range: 4-15V
• Low voltage alarm mode for 2-8S
• Alarm set value range:OFF-2.7-3.8V
• Size: 40mm x 25mm x 11mm
• Weight: 9g
• Includes: Voltage meter and instructions

Wire mesh cleaner for keeping soldering iron tip clean.

Stop beating up your fingertips fighting ball links, these handy HobbyStar pliers allow you to easily pop ball links on and off. Feature spring-assisted opening and a curved design for easy operation.

17mm hex adapter for balancing 1/8 scale buggy tires with SKYRC Tire Balancer.

EC3 style connectors are rated for high current draw (60A continuous), accept up to 12 gauge wire and are very easy to solder. Very ergonomic, easy to use and provide very little resistance. Designed so that the polarity cannot be reversed.  

Program card for use with HobbyStar brushed crawler ESC's.

HobbyStar external BECs are specifically designed for demanding applications and therefore have the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns. Simple to install and easily adjustable, HobbyStar BEC's provide peace of mind.

• Output: 5V/3A or 6V/3A  (changeable with jumper)
• Input Voltage: 6V-25V (2-6s LiPo; 5-18 cell Ni-XX)
• Output Current: 3A Continuous, 8A Burst
• Weight: 7g
• Dimensions: 30 x 9 x 6mm

Never charge a Lipo battery without one of these! Designed to contain a fire should one break out while your battery is charging. These bags are made from a fire retardant woven fiberglass fabric and have a velcro enclosure to keep batteries inside. We highly recommend you follow all Lipo safety guidelines and that you never leave a Lipo battery unattended while charging. For general Lipo safety as well as tech tips and charging information check out our section on Lipo Battery Basics.

Specs:

• Size: 23cm x 30cm (9in x 12in)
• Weight: 115g

A high-quality HobbyStar connector for connecting two batteries with XT90 style connectors in series. With two batteries connected in series you will have double the voltage and power of a single battery, but with the same run time as one battery. 10AWG wire.  

A powerhouse of a soldering iron, the Green 060 packs 60W of power in a handheld unit and even includes a dial to adjust temperature from 200-400C (392-842F).

It even comes with a high-grade ceramic heating element and an internal LED light which indicates when it is plugged in.  Uses standard 900 series tips that all Green soldering irons and stations use.

Heavy-duty upgraded aluminum servo horn for the Traxxas SCX24™. Features a clamping design for slop-free fit, and a beefy design for ultimate strength.  For use with stock micro-servo, includes mounting hardware.