67 products
67 products
Sort by:
When a standard 1/8 motor isn't enough, the HobbyStar 4082 brushless, sensorless motor is the ticket for your 1/8 truck for monster horsepower. 4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 82mm length make this the ultimate motor for your monster truck or truggy.
Features:
- Brushless, sensorless 4-pole motor
- 12-slot high-torque stator
- CNC machined 6061 T6 billet aluminum heatsink can
- High-purity copper windings maximize efficiency
- High-RPM ABEC5 oversized bearings
- Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
- Precision balanced rotor for smooth operation, reliability and maximum RPM
- Stator-Super Thin (0.2mm) laminations
- Removable/replaceable rotor
- Precision engineered for maximum energy conversion
HobbyStar V2 motors and ESC's now include built-in temperature monitoring and thermal protection to protect your valuable electronics. When paired with a compatible HobbyStar ESC, the user can set up the system to either reduce or completely cut off power if either the motor, or ESC temperature exceeds the programmed limit. Motors can be run without temperature port connected when paired with ESC's that do not offer temperature monitoring.
When too much is just enough, the HobbyStar 4292 is the motor you are looking for. At a full 92mm in length this is one of the longest and most powerful motors you can shoehorn into your 1/8 truck for ridiculous power (make sure to measure to see if you have the clearance!). 4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 68mm length make this the ultimate motor for your 1/8 truck or truggy.
Features:
- Built-in temperature sensor (must use with compatible ESC).
- Brushless, sensored 4-pole motor
- 12-slot high-torque stator
- CNC machined 6061 T6 billet aluminum heatsink can
- High-purity copper windings maximize efficiency
- High-RPM ABEC5 oversized bearings
- Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
- Precision balanced rotor for smooth operation, reliability and maximum RPM
- Stator-Super Thin (0.2mm) laminations
- Removable/replaceable rotor
- Precision engineered for maximum energy conversion
HobbyStar V2 motors and ESC's now include built-in temperature monitoring and thermal protection to protect your valuable electronics. When paired with a compatible HobbyStar ESC, the user can set up the system to either reduce or completely cut off power if either the motor, or ESC temperature exceeds the programmed limit. Motors can be run without temperature port connected when paired with ESC's that do not offer temperature monitoring.
When a standard 1/8 motor isn't enough, the HobbyStar 4082 brushless, sensorless motor is the ticket for your 1/8 truck for monster horsepower. 4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 68mm length make this the ultimate motor for your 1/8 truck or truggy.
Features:
- Built-in temperature sensor (must use with compatible ESC).
- Brushless, sensored 4-pole motor
- 12-slot high-torque stator
- CNC machined 6061 T6 billet aluminum heatsink can
- High-purity copper windings maximize efficiency
- High-RPM ABEC5 oversized bearings
- Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
- Precision balanced rotor for smooth operation, reliability and maximum RPM
- Stator-Super Thin (0.2mm) laminations
- Removable/replaceable rotor
- Precision engineered for maximum energy conversion
The same 1/8 scale powerhouse design as the HobbyStar 4068 sensorless motor, the HobbyStar 4268 adds a sensor to provide silky-smooth operation at all RPM's. Gold-plated solder tabs feature a concave design to hold solder in place for an easy, clean connection to motor.
A powerhouse motor for your 1/8 scale buggy, the HobbyStar 4268 brushless, sensored motor is the ideal powerplant for to supply your 1/8 scale vehicle with tire-shredding power. 4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 68mm length make this the ultimate motor for your 1/8 buggy.
Features:
- Brushless, sensored 4-pole motor
- 12-slot high-torque stator
- CNC machined 6061 T6 billet aluminum heatsink can
- High-purity copper windings maximize efficiency
- High-RPM ABEC5 oversized bearings
- Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
- Precision balanced rotor for smooth operation, reliability and maximum RPM
- Stator-Super Thin (0.2mm) laminations
- Removable/replaceable rotor
- Precision engineered for maximum energy conversion
The HobbyStar 540 V3 series motors are the next generation of a championship-winning powerplant that continues to push the boundaries.
Along with looking amazing, the all-new can and stator design maximizes cooling efficiency, to raise the bar yet again. The V3 Spec-winds have shed an incredible 20g of weight, making it a full 40g lighter than the original, V1 design at only 140g.
Underneath the beautiful can lies an all-new sensor board, stronger magnets in the rotor, lightened stators, and a beefed-up endplate. Gold-plated solder tabs and titanium-nitride coated aluminum bolts keep it all together while keeping things light.
Available in SPEC and MOD versions, as well as an all-new MOD-ET version which comes with a high-torque rotor and stator optimized for drag-racing.
Features:
- Re-designed motor can for more efficient cooling
- Increased strength neodymium rotor-magnets
- New stator design is lighter and more efficient
- Titanium-nitride coated aluminum can screws
- Gold-plated solder tabs
- Weighs 20g less than V2 motors
- Available "ET" version for drag-racing with high-torque rotor & ceramic bearings
$49.99
Unit price per$49.99
Unit price perHobbyStar brushless outrunner motors are built using high-quality components and precision balanced to ensure a smooth, reliable and powerful motor for your aircraft. Motor shafts can be reversed on all motors, and a hardware kit with mounting plate, prop adapter and hardware kit are included with all motors.
Features:
- 14-pole, 12-slot high-torque design
- CNC machined 6061 T6 billet aluminum housing
- High-purity copper windings for maximum efficiency
- High RPM ABEC 5 oversized bearings
- Precision balanced rotor
- Super-thin stator laminations (0.2mm)
- Flexible silicone leads with pre-installed gold-plated connectors
$49.99
Unit price per$49.99
Unit price perHobbyStar boat motors are engineered to provide maximum power and cooling for your RC watercraft. Open endbells radiate heat away from the motor, and cooling jackets are available separately for all motors. Motor leads come with pre-installed 4.0mm gold-plated bullet plugs for easy, no-soldering connection and a wide variety of KV's ensure a dialed setup for your application.
Features:
- 4-pole motor with 12-slot high-torque design
- CNC Machined 6061 T6 Billet Aluminum Can
- High-purity copper windings maximize efficiency
- High-RPM ABEC5 oversized bearings
- Precision balanced rotor for smooth operation and maximum RPM
- Super-thin (0.2mm) stator laminations
A scaled-down version of the the race-proven 540 race motors, the HobbyStar 390 V2 motors bring championship-winning design to a smaller package for your small scale rig.
High-quality Japanese aluminum is used for the cases and Japanese NSK bearings keep things spinning with as little resistance as possible.
Gold plated solder tabs and an included sensor cable round off this ideal small-scale motor.
When too much is just enough, the HobbyStar 4092 is the motor you are looking for. At a full 92mm in length this is one of the longest and most powerful motor you can shoehorn into your 1/8 truck for ridiculous power (make sure to measure to see if you have the clearance!). 4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 82mm length make this the ultimate motor for your monster truck or truggy.
Features:
- Brushless, sensorless 4-pole motor
- 12-slot high-torque stator
- CNC machined 6061 T6 billet aluminum heatsink can
- High-purity copper windings maximize efficiency
- High-RPM ABEC5 oversized bearings
- Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
- Precision balanced rotor for smooth operation, reliability and maximum RPM
- Stator-Super Thin (0.2mm) laminations
- Removable/replaceable rotor
- Precision engineered for maximum energy conversion
A scaled-down version of the the race-proven 540 race motors, the HobbyStar 380 V2 motors bring championship-winning design to a smaller package for your small scale rig.
High-quality Japanese aluminum is used for the cases and Japanese NSK bearings keep things spinning with as little resistance as possible. Gold plated solder tabs and an included sensor cable round off this ideal small-scale motor.
$47.99
Unit price per$47.99
Unit price perHobbyStar V2 motors and ESC's now include built-in temperature monitoring and thermal protection to protect your valuable electronics. When paired with a compatible HobbyStar ESC, the user can set up the system to either reduce or completely cut off power if either the motor, or ESC temperature exceeds the programmed limit. Motors can be run without temperature port connected when paired with ESC's that do not offer temperature monitoring.
3665 4-pole motor provides tremendous torque and comes with pre-installed 4.0mm bullet connectors.
Features:
- 4-pole motor with 12-slot high-torque design
- High-purity copper windings maximize efficiency
- High-RPM ABEC5 oversized bearings
- Precision balanced rotor for smooth operation and maximum RPM
- Super-thin (0.35mm) stator laminations
With the power to throw your truck around like a toy, the HobbyStar 4076 brushless, sensorless motor is the ideal powerplant for to supply your 1/8 scale vehicle with tire-shredding power. 4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 76mm length make this the ultimate motor for your monster truck or truggy.
Features:
- Brushless, sensorless 4-pole motor
- 12-slot high-torque stator
- CNC machined 6061 T6 billet aluminum heatsink can
- High-purity copper windings maximize efficiency
- High-RPM ABEC5 oversized bearings
- Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
- Precision balanced rotor for smooth operation, reliability and maximum RPM
- Stator-Super Thin (0.2mm) laminations
- Removable/replaceable rotor
- Precision engineered for maximum energy conversion
HobbyStar V2 motors and ESC's now include built-in temperature monitoring and thermal protection to protect your valuable electronics. When paired with a compatible HobbyStar ESC, the user can set up the system to either reduce or completely cut off power if either the motor, or ESC temperature exceeds the programmed limit. Motors can be run without temperature port connected when paired with ESC's that do not offer temperature monitoring.
A powerhouse motor for your 1/8 scale buggy, the HobbyStar 4268 V2 brushless motor is the ideal powerplant for to supply your 1/8 scale vehicle with tire-shredding power. 4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 68mm length make this the ultimate motor for your 1/8 buggy.
Features:
- Built-in temperature sensor (must use with compatible ESC).
- Brushless, sensored 4-pole motor
- 12-slot high-torque stator
- CNC machined 6061 T6 billet aluminum heatsink can
- High-purity copper windings maximize efficiency
- High-RPM ABEC5 oversized bearings
- Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
- Precision balanced rotor for smooth operation, reliability and maximum RPM
- Stator-Super Thin (0.2mm) laminations
- Removable/replaceable rotor
- Precision engineered for maximum energy conversion
$42.99
Unit price per$42.99
Unit price perHobbyStar brushless outrunner motors are built using high-quality components and precision balanced to ensure a smooth, reliable and powerful motor for your aircraft. Motor shafts can be reversed on all motors, and a hardware kit with mounting plate, prop adapter and hardware kit are included with all motors.
Features:
- 14-pole, 12-slot high-torque design
- CNC machined 6061 T6 billet aluminum housing
- High-purity copper windings for maximum efficiency
- High RPM ABEC 5 oversized bearings
- Precision balanced rotor
- Super-thin stator laminations (0.2mm)
- Flexible silicone leads with pre-installed gold-plated connectors
A powerhouse motor for your 1/8 scale buggy, the HobbyStar 4068 brushless, sensorless motor is the ideal powerplant for to supply your 1/8 scale vehicle with tire-shredding power. 4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 68mm length make this the ultimate motor for your 1/8 buggy.
Features:
- Brushless, sensorless 4-pole motor
- 12-slot high-torque stator
- CNC machined 6061 T6 billet aluminum heatsink can
- High-purity copper windings maximize efficiency
- High-RPM ABEC5 oversized bearings
- Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
- Precision balanced rotor for smooth operation, reliability and maximum RPM
- Stator-Super Thin (0.2mm) laminations
- Removable/replaceable rotor
- Precision engineered for maximum energy conversion