The SKYRC Toro TS120 Competition ESC features a new anodized aluminum case and a low internal resistance of <0.0003 ohm. Smooth and precise throttle response combined with braking performance ideal for 1/10th scale competition. With 10 user defined power profiles available and Advance Timing System (ATS) for "Boost" and "Turbo" profiles both provide unique power curves suited for running in non-spec stock or modified classes.

Blinky mode (zero timing) profile is available for organized spec class racing. 

New aluminum casing improves cooling efficiency while providing a works appearance.  The TS120 features an onboard switch design. No more external wired switches means racers no longer need to worry about switch placement and finding room on today’s high performance racing chassis’.

Available program box is available for adjusting the ESC without the need for a computer or laptop at the track allowing racers to change ESC profiles, adjust ESC settings, test PPM signal between transmitter and receiver, verify servo performance, motor KV / RPM performance and LiPo battery monitor functions on the LCD screen through the on-board RX plug, motor sensor, LiPo balancer, and USB ports (program box sold separately).

Can also be programmed via SkyLink and WiFi Module. 

NOTE: This ESC is designed for use in 1/10 2WD buggies, 2WD SCT's, 2WD stadium trucks and 1/10 4WD buggies with 540 2-pole motors. NOT FOR USE IN 4WD SHORT COURSE TRUCKS.  NOT FOR USE WITH 4-POLE MOTORS, AND ALTHOUGH SPECS LIST 3S COMPATABILITY, MOTOR TURN LIMITS MUST BE ADHERED TO WHEN RUNNING 3S OR ESC DAMAGE MAY RESULT.  3S USE IS NOT RECOMMENDED WITH THIS CATEGORY OF ESC.

The SKYRC Toro TS120 Competition ESC features a new anodized aluminum case and a low internal resistance of <0.0003 ohm. Smooth and precise throttle response combined with braking performance ideal for 1/10th scale competition. With 10 user defined power profiles available and Advance Timing System (ATS) for "Boost" and "Turbo" profiles both provide unique power curves suited for running in non-spec stock or modified classes.

Blinky mode (zero timing) profile is available for organized spec class racing. 

New aluminum casing improves cooling efficiency while providing a works appearance.  The TS120 features an onboard switch design. No more external wired switches means racers no longer need to worry about switch placement and finding room on today’s high performance racing chassis’.

Available program box is available for adjusting the ESC without the need for a computer or laptop at the track allowing racers to change ESC profiles, adjust ESC settings, test PPM signal between transmitter and receiver, verify servo performance, motor KV / RPM performance and LiPo battery monitor functions on the LCD screen through the on-board RX plug, motor sensor, LiPo balancer, and USB ports (program box sold separately).

Can also be programmed via SkyLink and WiFi Module.

NOTE: This ESC is designed for use in 1/10 2WD buggies, 2WD SCT's, 2WD stadium trucks and 1/10 4WD buggies with 540 2-pole motors. NOT FOR USE IN 4WD SHORT COURSE TRUCKS.  NOT FOR USE WITH 4-POLE MOTORS, AND ALTHOUGH SPECS LIST 3S COMPATABILITY, MOTOR TURN LIMITS MUST BE ADHERED TO WHEN RUNNING 3S OR ESC DAMAGE MAY RESULT.  3S USE IS NOT RECOMMENDED WITH THIS CATEGORY OF ESC.

The new and upgraded TS150 Pro Aluminum ESC is a beefed-up version of the original powerhouse TS150. Race-grade 1/8 ESC with turbo timing option, and fully programmable via Progbox or WiFI module and smartphone.

Features:

• Built for 1/8 Buggy, Truck and Monster
• Support 2-6S LiPo or 6-18S NiMH
• MCU Intelligent Control
• 6V/3A BEC : Built-in BEC is 6V/3A, max. output current can be up to 8A. Synchronous rectification design improves the BEC efficiency.
• Turbo Timing : Turbo timing adjustable via Progbox as PC link or WiFi module and smartphone
• Low Voltage protection
• Overheat protection
• Signal Loss protection

Specifications:

• Constant/Burst Current : 150A/950A
• Motor Compatible : Brushless Sensor & Sensorless ESC
• Car Compatible : 1/8 Buggy, Truck and Monster
• Motor Limits :
  • 2-4S Lipo KV≤3000,2-6Poles
  • 2-6S Lipo KV≤2400, 2-4Poles
• Resistance : 0.0002ohm
• Battery Cell Count : 6-18S NIMH or 2-6S LIPO
• BEC Output : 6V@5A
• Fan : 5V@0.3A
• Weight : 123g (without wire)
• Size : 58x41x38mm (LxWxH)

Supercharged by the high-performance chip from STMicroelectronics, TS160 Pro ESC takes its power and efficiency further than ever.

The proprietary optimized algorithm makes the speed controller snappy and responsive in precise and sophisticated computing.

For 1/10 RC Cars, TS160 Pro is definitely a Pro ESC with exceptional performance but without equal!

Thrilling Experience. TS160 comes standard with burst power and stable output. Whether you are looking for a smooth and linear racing feeling, or burst power racing, you can enjoy the thrill of adrenaline rush!

Play Light with Built-in BEC. This speed controller comes with a built-in BEC, outputting a current of up to 15A at voltages switchable between 6.0 and 7.4V. It eliminates the need for a separate battery to power various standard and high-voltage servos and peripherals! 

Play it Cool. The high-speed cooling fan keeps dissipating heat actively; the select copper posts can carry a high current. The internal heat of the ESC is dissipated to ensure that the ESC is running at the proper temperature!

Vibing, and Protected. Empowered by SkyRC's latest proprietary PowerRun algorithm, the powerful hardware ensures multiple real-time protection while providing extreme violent output. It significantly eliminates the stakes of damage to the ESC under high load, and the reliability and durability are drastically improved!

Be Blue Go Smart. Say goodbye to cables! TS160 can easily connect to the smartphone via the Bluetooth dongle (sold separately). Now, RC drivers can set various parameters and read data in the field. With over-the-air (OTA), firmware updating via Bluetooth is a breeze! 
Almost 40 parameters commonly used in 1/10 RC power systems can be programmed. Accelerator force, brake force, Boost/Turbo timing, etc., can be easily set through the RC Gear app according to your power demands.

The SKYRC Toro TS50 Competition Sensored ESC features an all new, 50A unit featuring a low internal resistance of <0.0006 ohm. Smooth and precise throttle response combined with braking performance ideal for 1/10th scale competition. 10 user defined power profiles are available.

(Note: Timing advance is not available with the TS50 even though the optional program box includes timing advance setting profiles) The TS50 features an electronic switch design to eliminate the problem of intermittent contact commonly associated with an ordinary mechanical switch.

Available program box is available for adjusting the ESC without the need for a computer or laptop at the track allowing racers to change ESC profiles, adjust ESC settings, test PPM signal between transmitter and receiver, verify servo performance, motor KV / RPM performance and LiPo battery monitor functions on the LCD screen through the on-board RX plug, motor sensor, LiPo balancer, and USB ports (program box sold separately).

SKYRC Tire Warmer Bands elevate your RC racing experience by pre-heating tires to the ideal temperature, ensuring optimal grip and performance from the start. These bands are designed to fit a wide range of tire sizes, suitable for both 1/10 and 1/8 scale RC cars. By maintaining a consistent temperature, these bands help in achieving a uniform tire performance, crucial for competitive racing.

Simple and efficient, these warmer bands plug directly into the SKYRC tire warmer controller, offering an easy-to-use solution for racers. They can be powered by a 12V DC source or a 3S LiPo battery, providing flexibility for use in various setups. This adaptability ensures that racers can maintain optimal tire conditions, regardless of the power sources available at different racing venues.

Compared to alternatives, SKYRC Tire Warmer Bands stand out for their ease of use and wide compatibility. Unlike some other warmers that may require specific setups or additional equipment, these bands offer a plug-and-play solution that caters to a broad range of tire sizes and types. This universal applicability makes them a preferred choice for many racers looking for a hassle-free tire warming solution.

Impact on performance is significant, as pre-heated tires provide better traction, quicker lap times, and a more predictable handling experience. Racers using SKYRC Tire Warmer Bands can expect their vehicles to perform at their best right from the start, without the need for tires to gradually warm up during the race. This can be the difference between leading the pack and playing catch-up.

Optimize Your RC Car's Performance with the SKYRC SCWS2000 Bluetooth RC Car Corner Weight Scale System. This cutting-edge tool is engineered for precision, enabling enthusiasts and competitive racers to accurately measure and adjust the weight distribution across their vehicle's four corners. Achieving the perfect balance enhances handling and overall performance, especially crucial for drift and touring car setups.

Seamless Connectivity and User Experience are at the heart of the SKYRC system. Utilizing Bluetooth 5.0, it offers a stable, fast connection to the RC Gears app, available for iOS and Android devices. This wireless operation eliminates the clutter of wires, streamlining your setup process and keeping your workspace tidy.

Designed for Precision, the system boasts high-quality aluminum sensors and an advanced measurement algorithm. This combination ensures measurements are accurate to +/- 0.1 gram, with a maximum weight limit of 2000 grams per scale. Whether you're fine-tuning for a race or calibrating for a casual run, the SKYRC system delivers the precision you need.

Compact and Portable, the SKYRC scale system is ideal for racers who travel. Its small footprint doesn't compromise performance, offering the capability to quickly adjust each corner's weight to achieve the desired chassis balance. The intuitive app interface further simplifies adjustments, highlighting each corner in orange to indicate the current selection.

Long-Lasting and Reliable, the system is powered by CR2450 lithium coin batteries, ensuring up to 30 continuous hours of performance. This endurance, combined with ultra-low power consumption, means more time optimizing and less time worrying about power.

Parallel charging cable with XT60 to XT60 plug. To suit many chargers with Dual Output, including the SKYRC T1000 and SKYRC D200neo.

Allows the power from both output ports to be combined to charge at a higher amp rate.

Note: The Parallel mode is available only for lithium batteries, which cannot be used for other types of batteries.

Solder sucker is an easy way to remove excess solder, body unscrews to allow easy removal of solder from the inside of tool body.

Wire mesh cleaner for keeping soldering iron tip clean.

Features:

• This handy six arm station has 6 arms and powerful alligator clips that can rotate 360 degrees.
• Soldering station is made of aluminum alloy with a anti-skid base.
• This multifunction station can be widely used for soldering drones, RC models, PCBs, etc.

Specifications:

• Material: Aluminum alloy+plastic
• Base Size: 133*14mm/5.23*0.55"
• Arm+Clip Length: 295mm

Package Includes:

• 1 x Base
• 6 x Arms+Clips

T-Plug (Deans) M on one end, XT60 FM on the other.    

Female Deans style plug on one end and Tamiya Male plug on the other end of 150mm of 14AWG silicone wire.  

Male Deans style plug on one end and Tamiya Female style plug on the other end of 150mm of 14AWG silicone wire.  

This is the program card for programming Tenshock ESC's.  With this card you can easily and quickly adjust the following by simply plugging into your ESC signal lead.  All settings are displayed at once and you can scroll through and adjust each one individually.