SKYRC 1/10 Buggy Setup Station

Thanks to this setup system set in elegant black, which was specially designed for 1/10 buggies, almost all important parameters can be optimized conveniently and easily. After all, the better a RC car is set up, the more fun it gets when racing on the next track.

Adjustable Parameters

• Camber (+/- 10°)
• Toe (+/- 40°)
• Caster (+/- 20°)
• Steering

Includes
4x Measurement gauges for each suspension
1x Toe gauge

Dial in repeatable handling the way racers actually tune: with numbers. SKYRC’s 1/10 Touring Chassis Setup System lets you measure and set camber, caster, toe, and steering throw with precision across all four corners, so left/right and front/rear stay consistent after every rebuild or track change.

Mount your chassis on the station, secure it with the adjustable arms, and use the included gauges to tweak suspension and steering - whether you're chasing neutral handling in tight corners or replicating a proven setup from last weekend's race. It's a baseline tool for serious tuning: consistent geometry means predictable tire wear, better turn-in, and lap times that shave seconds without guesswork. Purpose-built for on-road geometry—ideal for spec racing, mod TC, and drift baselines where tiny angle changes matter.

CNC-machined from durable aluminum with a black anodized finish, this compact station (260 x 180 x 25mm, 850g) packs into your pit bag easily and includes a hard carry case for protection. The four corner gauges slide smoothly on bearings for precise readings, while the toe plate ensures front-end alignment down to 0.5° increments. No batteries needed - just a flat workbench. Racers confirm it works seamlessly for drift and touring setups, as long as your chassis width matches standard 1/10 on-road specs (off-road versions are wider and incompatible).

Key Specifications

• Model: SK-600069-26
• Compatibility: All 1/10-scale touring/on-road cars (not off-road or 1/8)
• Adjustable Parameters: Camber (±3° typical, per corner), Toe (±5° front/rear), Steering throw, Caster markings
• Included Tools: 4x corner measurement gauges, 1x toe-in/out plate, adjustable arms, carry case
• Construction: Black anodized CNC aluminum
• Dimensions / Weight: 260 x 180 x 25mm / 850g
• Accuracy: 0.5° increments for toe/camber; bearing-guided for smooth operation

Data-driven geometry. Consistent setups. Faster laps.

NOTE: Does not work with AE B6 series buggies, and fit on all buggies cannot be guaranteed.

SKYRC 1/8 Buggy Setup Station

Thanks to this setup system set in elegant black, which was specially designed for 1/8 buggies, almost all important parameters can be optimized conveniently and easily. After all, the better a RC car is set up, the more fun it gets when racing on the next track.

Adjustable Parameters

• Camber (+/- 10°)
• Toe (+/- 40°)
• Caster (+/- 20°)
• Steering

Includes
4x Measurement gauges for each suspension
1x Toe gauge

The Cheetah 1/10th 60A Sensored Combo set is ready to run out of box, combining the Cheetah 60A Sensored ESC, Cheetah Sensored Motor and Program Card.

This combo is perfect for 1/10th scale cars and trucks. With the included program card, you can modify settings settings such as cut-off voltage, brake and punch strength, drag brake and other parameters that add up to an incredible RC driving experience. You simply won't find a better power package for a more attractive price!

Not recommended for 4WD vehicles, and 3S should only be run on lightweight vehicles with 2590KV (13.5T) and lower KV.

ESC Specifications:

• Model: CS60
  
• Constant/Burst Current: 60A/380A
  
• Recommended Car: 1/10 and 1/12 Buggy and Touring Car, 1/10 and 1/8 Crawler
  
• Motor Limits: 2S LiPo: ≥8.5T(1/10 Touring), ≥10.5T(1/10 Buggy);  3S LiPo ≥10.5T(1/10 Touring), ≥13.5T(1/10 Buggy)
  
• Resistance: 0.0007 ohm
  
• Cell Count: 2-3S LiPo or 4-9S NiMH
  
• BEC Output: 6V@3A
  
• Size: 39x38x20mm (LxWxH)
  
• Weight: 30g (without wires)
  
• Fan: Included/5V@0.2A, Max 12.6V
  
• Connectors: Motor leads have bullet connectors pre-soldered for plug-and-play connection to ESC (must solder battery connector of choice)

If your touring car feels a little different every time you put it on the table, the camber setting is a good place to stop guessing. The SKYRC CTG-015 gives you a repeatable digital reading for camber, and it can also help with toe checks when used vertically on a setup station.

Instead of squinting at a mechanical gauge and convincing yourself that "close enough" is a setup philosophy, the CTG-015 sends real-time readings to the app over Bluetooth 5.0. It reads across a +/-17.5 degree range with +/-0.2 degree accuracy, which is the kind of boring number that becomes very exciting when your car stops doing weird things mid-corner.

The gauge has a compact metal body, USB-C charging, and a built-in 3.7V 200mAh LiPo battery. This is the 1/10 touring car size, SK-500042, measuring 45x12x80mm and weighing 53g. Keep the 1/8 version out of your mental parts bin unless you actually need the longer one.

Includes one SKYRC CTG-015 Digital Camber Gauge. SKYRC Part Number: SK-500042.

Quick specs:

• Measuring range: +/-17.5 degrees
• Measuring accuracy: +/-0.2 degrees
• Connection: Bluetooth 5.0 app display
• Charging interface: USB-C / Type C
• Input voltage: 5V
• Input current: 200-300mA
• Battery: 3.7V 200mAh LiPo
• Working voltage: 3.4-4.2V
• Working current: less than 10mA
• Low-voltage alert: below 3.4V, red flash
• Size: 45x12x80mm
• Weight: 53g
• Material: aluminum / metal
• Color: black

Getting camber right on a 1/8 car matters, but the usual routine of holding a gauge in place and trying to read tiny markings is not exactly anyone's favorite part of setup. The SKYRC CTG-016 is the cleaner answer - a digital camber gauge sized for 1/8 RC cars that measures both camber and toe, then sends the reading straight to the RC Gears app on your phone. That makes setup changes quicker to read, easier to repeat, and a lot less annoying when you are trying to match both sides properly.

Like the 1/10 version, it uses Bluetooth 5.0 for real-time display, charges by USB-C, and is built from CNC-machined aluminum for stability and durability. It keeps the same +/-17.5 degree measuring range and +/-0.2 degree accuracy, but with the longer 45x12x100mm body sized for 1/8 applications. Weight is 58g, battery capacity is 200mAh, and the whole thing is small enough to live in a pit bag instead of on a shelf where good setup tools go to be forgotten.

Introducing the SKYRC D200 Neo and Neo+, a revolutionary dual-port smart LiPo charger, designed for the avid RC hobbyist. This 800W charger is a game-changer in the world of battery management, offering unparalleled efficiency and versatility.

Efficient Dual-Port Charging: The D200 Neo's dual ports operate independently, allowing for simultaneous charging of two batteries. This feature is particularly beneficial for RC enthusiasts who require quick turnaround times. The smart power distribution ensures that once a battery is fully charged, the remaining power is redirected to the other port, maximizing charging efficiency.

Advanced Balance Charging: Balance charging is crucial for maintaining battery health and longevity. The D200 Neo excels in this area with its 1.5A balance charge current, ensuring that each cell in your battery pack is evenly charged, leading to improved performance and extended battery life.

Versatile Discharging and Battery Analysis: Not just limited to charging, the D200 Neo also features internal and external discharge capabilities. Its unique battery analyzer tool records voltage and current data, providing invaluable insights into your battery's performance and health.

Additional Features: The charger's flexibility extends to its function as a DC power supply, with adjustable output from 5V to 20V. It's equipped with a range of safety features, including a safety timer and maximum capacity shut-off, to prevent overcharging. The user-friendly interface offers a battery meter for checking internal resistance, a key indicator of battery health.

Get repeatable, numeric readings of your gear differential’s hardness so you can build, log, and exactly replicate winning setups instead of trusting "feel". That means fewer guess-and-check rebuilds and more consistent left/right and front/rear balance - helping you match handling to track grip and conditions across race weekends.

Just plug in any 5 V Micro-USB source (power bank, charger, laptop), attach the diff with the included adapter, press the button, and in 3–5 seconds you have a hard number you can record and compare. For maximum consistency, test at the same temperature - silicone oil viscosity changes with heat, and serious racers know that matters.

Precision-machined from a single block of anodized aluminum, the Diff Analyzer is only 54×28×24.8mm and 59g - small enough to toss in any pit bag or a pocket, tough enough for daily track use. Out of the box it works with all 1/10-scale gear diffs via the included 7mm hex (wheel-nut) and dogbone/pin/outdrive adapters. Optional adapters add 1/8-scale buggies/truggies and Mini-Z support, letting you standardize readings across your entire fleet.

Key specs

• Model: SK-500026-03
• Power: 5 V Micro-USB (any power bank or USB port)
• Test Time: ~3–5 seconds per diff
• Display: Clear white LED numeric value
• Compatibility: All 1/10-scale gear diffs (adapters included); 1/8-scale & Mini-Z with optional adapters
• Dimensions / Weight: 54 × 28 × 24.8 mm / 59 g
• Construction: CNC-machined anodized aluminum
• Included: 7 mm hex adapter + dogbone/pin/outdrive adapter for 1/10-scale

Data-driven diff tuning. Replicate fast setups. Win more mains.

If you ever feel like your car "should" handle the same but does not, ride height is one of the first things to check. A couple tenths of a millimeter can be the difference between a calm, repeatable chassis and a car that pushes one way, traction rolls easier on one side, or changes character as the tires wear. This SKYRC Digital Ride Height Gauge gives you a fast, repeatable way to measure and match ride height at all four corners, so your adjustments are based on numbers, not guesswork.

The big advantage over most mechanical gauges is how easy it is to get the reading right. You are not lining up a slider and squinting at tiny etched marks or trying to read from a weird angle under pit lighting. You place the gauge, let the slim 2mm flat blade reach the measuring point, and read the number. The display rotates 180 degrees so you can read it from either side of the car without moving everything around.

It is also one of the most versatile ride height tools you can keep in your box. The 2mm to 38mm range covers a wide spread of setups from 1/24 all the way to 1/8, so one tool works across your whole lineup. It reads in 0.1mm steps, supports mm/in unit switching, and includes multi-point calibration with the included block (2mm, 10mm, 20mm). Accuracy is +/-0.3mm from 2mm to 20mm and +/-0.5mm over 20mm. Powered by 1x AAA with auto power-off.

Big RC chargers are hungry little boxes. Feed them with a random bench supply or a tired old brick and you get voltage sag, current limits, heat, and the delightful suspense of wondering which part of your charging setup will complain first. The SKYRC eFUEL PSU2000 is built for serious RC charging benches that need clean adjustable DC power without turning the pit table into a science-fair accident.

Output adjusts from 8-36V and 1-55A. On 100-120V AC input it provides up to 1200W. On 200-240V AC input it can provide up to 1980W. For US wall outlets, treat it as a very capable 1200W supply; the full 1980W rating depends on higher-voltage AC input.

A front LCD shows real-time voltage and current, while the smart cooling fan and built-in protections help keep the unit steady under load. It is a proper bench and track power source for high-output chargers, with enough control to set the voltage and current for your setup instead of just hoping the charger and supply decide to get along.

SKYRC Part Number: SK-200029.

Quick specs:

• Product type: Adjustable AC/DC switching power supply for RC chargers
• Input voltage: AC100V-AC240V
• DC nominal output power: 1200W +/-10% on AC110V; 1980W +/-10% on AC220V
• Output voltage range: 8.0V-36.0V, default 12V
• Output current range: 1.0A-55.0A, default 30A
• Voltage accuracy: +/-1%
• Current accuracy: +/-1%
• Conversion efficiency: greater than 85% at AC230V
• Output connector: XT90 output port
• Display: LCD voltage and current readout
• Protections: over-current, over-temperature, short-circuit, overload
• Dimensions: 289x90x158mm
• Weight: approx. 2.9kg
• Included: eFUEL PSU2000 power supply, AC power cord, SKYRC XT90-XT90 charge lead, instruction manual

The SkyRC FuriaX Supa Combo pairs the FuriaX Supa 60A brushless ESC with the FuriaX Supa 3650 sensorless brushless motor to form a matched 1/10 scale brushless system. It is aimed at drivers upgrading from brushed systems or basic RTR electronics in buggies, touring cars, short course trucks and drift chassis who want a reliable brushless combo without a complicated setup.

With KV options from around 2300kV up to 5400kV (depending on version), you can choose the combo suitable for your needs - either more torque or more speed: lower KV for heavier 1/10 trucks and off-road rigs like an Arrma Granite, higher KV for on-road and club-race builds based on platforms such as a Traxxas Slash or Losi 22. The system runs on 2-3S LiPo or 6–9 cell NiMH packs, so it drops neatly into most 1/10 RC car and truck layouts.

FuriaX Supa 60A Brushless ESC

The FuriaX Supa 60A ESC is the control side of the combo. It is rated at 60A continuous and up to 360A burst, and supports both sensored and sensorless brushless motors, though the included motor is sensorless. It is intended for 1/10 touring cars, buggies and short course trucks on 2–3S LiPo or 6–9S NiMH packs, with a compact footprint (about 48×38×38.5mm including fan) and a weight of roughly 100g so it will not upset the handling of most chassis.

Programming is done through SKYRC's RC Gears app on your phone, so you do not need a separate program box. From there you can set running mode (forward/brake, forward/brake/reverse, forward/reverse), drag brake, punch, maximum forward and reverse power, throttle neutral range, LiPo cutoff voltage, BEC output (6.0V or 7.4V), thermal cutoff level and motor pole setting. Cooling is handled by the integrated heatsink and fan, with airflow being the main requirement during installation.

• Current rating: 60A continuous / 360A burst
• Battery support: 2–3S LiPo or 6–9 cell NiMH
• Motor support: sensored or sensorless brushless motors for 1/10 applications
• Built-in BEC: selectable 6.0V or 7.4V for receivers and servos
• Configurable running mode, punch, drag brake, brake strength and reverse strength
• Adjustable LiPo cutoff, thermal protection and motor pole count
• Protection functions for low voltage, overheating and motor lock/stall conditions
• Approx. size and weight: 48×38×38.5mm with fan, about 100g

FuriaX Supa 3650 Brushless Motor

The FuriaX Supa 3650 is a 36×50mm 4-pole, 12-slot sensorless brushless motor built for 1/10 scale vehicles. Compared to a typical 2-pole 540-size motor, the 4-pole design produces more torque and smoother power delivery, which helps with controlled launches, steadier climbs and better throttle resolution on both dirt and pavement. Depending on the KV version, it is suitable for mixed-use buggies and trucks on 2S, or for higher-speed on-road setups on 2–3S.

Internally, the motor uses 0.2mm stator laminations, a 6061-T6 aluminum can, high-purity copper windings rated for high temperatures and sintered neodymium magnets rated to around 200°C. Pre-soldered 4.0mm gold-plated bullet connectors and color-coded ABC phase wires simplify wiring. The rotor is removable, which makes cleaning, bearing checks and any performance tuning more straightforward. It is designed to cope with dust and splashes encountered in normal off-road and car-park running, rather than being a fragile race-only part.

• Size: approx. 36mm diameter × 50mm length (3650 format)
• Design: 4-pole, 12-slot brushless sensorless
• KV options: commonly 2300kV, 3100kV, 3600kV, 4000kV and 5400kV, depending on the specific combo
• Battery rating (motor): up to 1–3S LiPo; the combo as a whole is used on 2–3S LiPo as limited by the ESC
• Construction: 0.2mm stator laminations, 6061-T6 can, high-temp copper windings and neodymium magnets
• Connectors: factory-installed 4.0mm gold bullets with ABC phase wiring
• Maintenance: removable rotor for easier cleaning and service
• Approximate weight: around 150g depending on KV version

Typical applications and compatibility

This combo is aimed at 1/10 hobby-grade RC cars where a driver wants a sensible brushless upgrade or replacement system. Typical use includes 2WD and 4WD buggies, touring cars, drift builds and short course trucks. It is a good fit for brushless conversions or electronics upgrades in vehicles like:

• Traxxas Slash, Rustler, Bandit, Stampede and similar 1/10 platforms
• Arrma Granite and other 2–3S 1/10 trucks when set up with appropriate gearing
• Tamiya TT-02 and similar touring chassis as a brushless conversion from the stock 540 motor
• Losi and Team Associated 1/10 buggies or short course trucks used for club racing or track days

If you are searching for an affordable 1/10 brushless combo, a 60A ESC and 3650 motor system for a brushless conversion, or a straightforward ESC + motor upgrade for a Traxxas, Arrma, Tamiya or similar 1/10 RC car, the FuriaX Supa Combo offers a practical option. It combines app-configurable ESC settings, sensible protections and a modern 4-pole motor in a package that installs easily and delivers predictable power from the first run.

Enhance Your RC Driving Experience: The SKYRC GC301 is a gyroscopic stability control device designed to revolutionize the way you drive your RC cars. By automatically adjusting steering based on gyro data, it ensures your vehicle maintains its intended path, offering unparalleled stability and control.

Customizable Performance: With an adjustable gain setting, the GC301 allows you to tailor the level of stability control to match your driving style or the demands of different racing conditions. This flexibility ensures optimal performance, whether you're navigating tight corners or accelerating down straightaways.

Advanced Technology for Superior Handling: This gyro stabilizer employs cutting-edge technology to detect and counteract unwanted vehicle movements, improving grip and preventing spin-outs. Its precision engineering makes it a must-have for any serious RC enthusiast looking to elevate their driving skills.

Easy Integration and Compatibility: Designed for easy installation, the GC301 seamlessly integrates with your RC car's existing setup. Its compact size and compatibility with a wide range of vehicles make it a versatile addition to your racing arsenal.

Drive with Confidence: By ensuring your RC car stays on its intended course, the GC301 adds a level of predictability to your driving. This not only improves lap times but also enhances the overall enjoyment of the hobby. Experience the difference in stability and control with the SKYRC GC301.

Knowledge is power! By knowing the facts before and after modifications, your efforts will not be in vain. GNSS Performance Meter will help you make sense of the improvements and help you make educated decisions to make sure you’re not spinning your wheels. For everyone trying to gauge their performance, here's an affordable way to do just that. Just got some new mods installed? Get some real feedback, really quickly. This is a professional-grade instrument accessible to enthusiasts. It’s every modeler’s dream. Enjoy!

Improved accuracy by tracking two satellite constellations
The GNSS Performance Analyzer supports GNSS(Global Navigation Satellite System) with GPS and GLONASS system that means more satellites are orbiting the earth. The advantage of this many satellites will definitely improve positional accuracy by tracking two satellite constellations instead of just GPS.

Small but Versatile
GNSS Performance Analyzer（GSM020) allows you to measure and analyze many aspects of your RC car & airplane’s performance using the latest GNSS engine (GPS, GLONASS) which gives you Acceleration, G-force, Speed, Time, Distance, High and Vertical Velocity. With its compact dimension of 40mm x 40mm x 17mm and internal antenna, it is an ideal choice for mounting on RC vehicles & airplanes.

Case Size: 40 x 39 x 16mm Weight: 38g

Peace of mind with built-in liPo battery
The 5 hours' up-time on the built-in rechargeable LiPo battery can give enough racing time to RC drivers or pilots in the field! With the micro USB charging port, it is very convenient to connect it to a USB port or another compatible USB power source for charging.

The GNSS PA App software automatically charts slope on as time elapses. Saved runs can be read by the App, allowing analyzing of average speed, maximum speed, and acceleration within the given time and defined distance. You can also define your own performance windows for measuring braking time, acceleration (e.g., 0-30 km/h, 10-50 km/h, 10 meters or any custom setting), G-force measurement, Max Speed, Average Speed, Distance, High and Vertical Velocity.

The meter can also be used as a speedometer and provides accurate logging of speed data.

The meter measures average speed，maximum speed，time elapsed，distance and altitude.

Visual LED indicator
The GNSS Analyzer is equipped with 3 LED indicators, signaling different operating modes. Open GNSS PA on the smartphone, the analyzer’s Bluetooth icon will stay steady blue, reflecting the device is connected; the satellite icon will stay steady green after a while of successful GNSS signal acquisition.

Built-in 1M Memory
The built-in 1M memory can record up to 50 records. And all the data can be transferred to the smartphone for analyzing! When the Flash is full, the previous record will be replaced automatically. Now you don't have to think about clearing data all the time or worry about missing the critical tracking data when the memory is full.

SKYRC B6AC V2 is the upgraded version for well-known iMAX B6AC. Compared with iMAX B6AC, it is more accurate and stable and also has some new features and functions. Users could set the terminal voltage by themselves and connect it to PC for PC control and firmware upgrade. What's more, users could also use it as Lithium Battery Meter and Battery Internal Resistance Meter. There are Automatic Charging Current Limit, Capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safer than V1.

SKYRC B6AC V2 is a high-performance, micro processor control charge/discharge station with battery management suitable for use with all current battery types, with integral equalizer for six-cell Lithium- Polymer (LiPo), Lithium High Voltage,Lithium iron phosphate(LiFe) and Lithium-Ion (LiIon) batteries; maximum 6A charge current and maximum 50W charge power.

Features:

• Dual Power AC/DC Input
• Temperature Probe Socket. If the temperature limit is reached, the process will be terminated.
• 2-6S XH Plug-in Balance Sockets
• The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35 V.
• Depending on different kinds of batteries, there are different charging modes to meet users' request.
• PC Control: The user can monitor pack voltage, cell voltage and other data during the charging, view charge data in realtime graphs, and can also control the charger from "ChargeMaster".
• Program Data Store / load
• Battery Resistance Meter
• Battery Voltage Meter
• Maximum Safety
• Terminal Voltage Control

What’s in the Box:

• iMAX B6AC V2
• AC Power Cord
• DC Cable with Alligator Clip Charging Connector
• T Plug with Banana connector Charging Cable
• T Plug with Alligator Clip Connector Charging Cable
• T Plug with XT60 connector Charging Cable
• T Plug with Futaba connector Charging Cable
• T Plug with JST connector Charging Cable
• Instruction Manual

These are genuine replacement scale pads for the SKYRC SCWS2000 Wireless Corner Weight System. Choose a 1-pack or 2-pack depending on how many pads you need (single or two replacement/spares). Great if you lost a pad, damaged one in your pit bag, or want extras for race travel. Pads pair to the RC Gears app the same way as the original system, and the app lets you assign each pad to any corner position.

Battery is included - each pad ships with a new CR2450 installed so it is ready to use out of the box.

What is included:

• 1x or 2x SKYRC SCWS2000 replacement scale pad(s) (based on your selection)
• 1x or 2x CR2450 battery/batteries (installed, based on your selection)

Important notes:

• Compatible with SKYRC SCWS2000 only
• This listing is for replacement pad(s) only - not a complete 4-corner scale kit
• RC Gears app and an existing SCWS2000 system are required to use these pads