Experience Seamless Tire Balancing with SKYRC: The SKYRC RC Tire Balancer brings unparalleled precision to RC racing enthusiasts. By incorporating Bluetooth connectivity and a dedicated app, this device simplifies the tire balancing process, allowing for accurate adjustments that enhance performance and reduce wear on your RC car.

Advanced Technology for Optimal Performance: Utilizing a high-accuracy load cell and a precision stepper motor, the SKYRC Tire Balancer ensures every tire is balanced to perfection. The innovative balancing algorithms are tailored specifically for RC tires, promoting stability and maneuverability at high speeds.

Designed for Convenience and Compatibility: Compatible with 1/10 scale RC cars (and 1/8 with an optional adapter), this tire balancer is a versatile tool for a wide range of racing enthusiasts. The intuitive RC Gears app provides real-time data and guidance, making tire balancing accessible for both beginners and seasoned racers.

Enhanced User Experience with Thoughtful Features: The 2.8-inch TFT screen offers a clear view of the balancing process, even in direct sunlight. The device's thoughtful design includes a calibration function for precise measurements and reverse polarity protection for safe operation.

What's Included for a Complete Set-Up: Each SKYRC Tire Balancer comes with essential accessories, including a 1/10 tire adapter, balancing putty, a DC power cable, and a carrying case for portability. An optional 1/8 tire adapter is available to accommodate different tire sizes.

Watch a video about Technical Insights, Demonstrations & Guide to Solving Common Problems

SKYRC 1/8 Buggy Setup Station

Thanks to this setup system set in elegant black, which was specially designed for 1/8 buggies, almost all important parameters can be optimized conveniently and easily. After all, the better a RC car is set up, the more fun it gets when racing on the next track.

Adjustable Parameters

• Camber (+/- 10°)
• Toe (+/- 40°)
• Caster (+/- 20°)
• Steering

Includes
4x Measurement gauges for each suspension
1x Toe gauge

Dial in repeatable handling the way racers actually tune: with numbers. SKYRC’s 1/10 Touring Chassis Setup System lets you measure and set camber, caster, toe, and steering throw with precision across all four corners, so left/right and front/rear stay consistent after every rebuild or track change.

Mount your chassis on the station, secure it with the adjustable arms, and use the included gauges to tweak suspension and steering - whether you're chasing neutral handling in tight corners or replicating a proven setup from last weekend's race. It's a baseline tool for serious tuning: consistent geometry means predictable tire wear, better turn-in, and lap times that shave seconds without guesswork. Purpose-built for on-road geometry—ideal for spec racing, mod TC, and drift baselines where tiny angle changes matter.

CNC-machined from durable aluminum with a black anodized finish, this compact station (260 x 180 x 25mm, 850g) packs into your pit bag easily and includes a hard carry case for protection. The four corner gauges slide smoothly on bearings for precise readings, while the toe plate ensures front-end alignment down to 0.5° increments. No batteries needed - just a flat workbench. Racers confirm it works seamlessly for drift and touring setups, as long as your chassis width matches standard 1/10 on-road specs (off-road versions are wider and incompatible).

Key Specifications

• Model: SK-600069-26
• Compatibility: All 1/10-scale touring/on-road cars (not off-road or 1/8)
• Adjustable Parameters: Camber (±3° typical, per corner), Toe (±5° front/rear), Steering throw, Caster markings
• Included Tools: 4x corner measurement gauges, 1x toe-in/out plate, adjustable arms, carry case
• Construction: Black anodized CNC aluminum
• Dimensions / Weight: 260 x 180 x 25mm / 850g
• Accuracy: 0.5° increments for toe/camber; bearing-guided for smooth operation

Data-driven geometry. Consistent setups. Faster laps.

NOTE: Does not work with AE B6 series buggies, and fit on all buggies cannot be guaranteed.

SKYRC 1/10 Buggy Setup Station

Thanks to this setup system set in elegant black, which was specially designed for 1/10 buggies, almost all important parameters can be optimized conveniently and easily. After all, the better a RC car is set up, the more fun it gets when racing on the next track.

Adjustable Parameters

• Camber (+/- 10°)
• Toe (+/- 40°)
• Caster (+/- 20°)
• Steering

Includes
4x Measurement gauges for each suspension
1x Toe gauge

Get your chassis balance dialed with the SKYRC SCWS2000 Wireless Corner Weight System. Corner weights are one of those "small changes, big results" tools - especially for touring and drift cars where a few grams left or right can change steering feel, traction roll, and consistency. SCWS2000 measures all 4 corners in real time so you can see front vs rear, left vs right, and diagonal balance while you make adjustments to preload, ride height, battery position, electronics placement, and ballast.

The best part is the workflow. No display box, no wire mess across your bench. Each pad connects over Bluetooth 5.0 to the RC Gears app (iOS and Android), so you get a full-screen layout that is easy to read at the track. You can quickly confirm total weight, corner weights, and distribution, then re-check after each change. There is also in-app calibration support if you want to zero things in using a 2000g reference weight.

The system is compact and travel-friendly. Each scale pad supports up to 2000g (8000g total), with 0.1g increments (0.01 oz) and SKYRC calls out 1g accuracy for RC setup work (tolerance is listed as +/- 3g). Pads run on CR2450 coin batteries, and SKYRC notes up to about 30 hours of continuous runtime. Each pad is about 68x68x22.5mm and about 70g, so it fits easily in a pit bag without taking over your toolbox.

Get repeatable, numeric readings of your gear differential’s hardness so you can build, log, and exactly replicate winning setups instead of trusting "feel". That means fewer guess-and-check rebuilds and more consistent left/right and front/rear balance - helping you match handling to track grip and conditions across race weekends.

Just plug in any 5 V Micro-USB source (power bank, charger, laptop), attach the diff with the included adapter, press the button, and in 3–5 seconds you have a hard number you can record and compare. For maximum consistency, test at the same temperature - silicone oil viscosity changes with heat, and serious racers know that matters.

Precision-machined from a single block of anodized aluminum, the Diff Analyzer is only 54×28×24.8mm and 59g - small enough to toss in any pit bag or a pocket, tough enough for daily track use. Out of the box it works with all 1/10-scale gear diffs via the included 7mm hex (wheel-nut) and dogbone/pin/outdrive adapters. Optional adapters add 1/8-scale buggies/truggies and Mini-Z support, letting you standardize readings across your entire fleet.

Key specs

• Model: SK-500026-03
• Power: 5 V Micro-USB (any power bank or USB port)
• Test Time: ~3–5 seconds per diff
• Display: Clear white LED numeric value
• Compatibility: All 1/10-scale gear diffs (adapters included); 1/8-scale & Mini-Z with optional adapters
• Dimensions / Weight: 54 × 28 × 24.8 mm / 59 g
• Construction: CNC-machined anodized aluminum
• Included: 7 mm hex adapter + dogbone/pin/outdrive adapter for 1/10-scale

Data-driven diff tuning. Replicate fast setups. Win more mains.

Light your pit the way racers actually work - bright, soft, and adjustable. The SKYRC LED Pit Light V2 delivers 180–600 lumens with six dimming steps and three color temperatures (3000K/3500K/4000K) so you can reduce glare on carbon and aluminum while still seeing tiny screws and solder joints. A foldable arm with around 270° rotation lets you aim light exactly where you need it, and touch-sensitive controls keep setup fast and clean at the bench.

Power it two ways: standard 6–15V DC (great with a pit supply) or USB 5V/2.1A when you want minimal wiring. Inside are 32 high-power LEDs that sip ≤11W yet output the equivalent of a much larger lamp. Compact and travel-ready, the V2 measures ~281×60×314.5 mm and weighs ~460 g, making it easy to pack for race day.

SKYRC part number SK-600089-01

RC cars have a special talent for collecting dust, sand, grass, and suspicious bits of track debris in places that seem specifically designed to be annoying. The SKYRC RC AirDuster is the tidy answer to that problem - a cordless blower built for proper RC cleanup, quick drying after wet runs, and cooling motors and ESCs between heats without dragging out a compressor or wasting canned air.

It is powerful in a very practical way. The brushless motor spins up to 80,000 RPM, the trigger is stepless, and you get 6 speed levels plus cruise mode, which means you can go from "gentle around electronics" to "remove half the parking lot from the chassis" without much drama. It feels more like a tool and less like one of those gadgets that looked clever online and then spent the rest of its life in a drawer.

The rest of it is equally sensible. Dual 21700 Li-ion cells give it 8000mAh total capacity, USB-C charging keeps life simple, and the compact 145x120x45mm body weighs about 340g, so it is easy to toss in a pit box and forget about until the moment you are very glad you brought it. Which is, in fairness, exactly what good tools are supposed to do.

If you ever feel like your car "should" handle the same but does not, ride height is one of the first things to check. A couple tenths of a millimeter can be the difference between a calm, repeatable chassis and a car that pushes one way, traction rolls easier on one side, or changes character as the tires wear. This SKYRC Digital Ride Height Gauge gives you a fast, repeatable way to measure and match ride height at all four corners, so your adjustments are based on numbers, not guesswork.

The big advantage over most mechanical gauges is how easy it is to get the reading right. You are not lining up a slider and squinting at tiny etched marks or trying to read from a weird angle under pit lighting. You place the gauge, let the slim 2mm flat blade reach the measuring point, and read the number. The display rotates 180 degrees so you can read it from either side of the car without moving everything around.

It is also one of the most versatile ride height tools you can keep in your box. The 2mm to 38mm range covers a wide spread of setups from 1/24 all the way to 1/8, so one tool works across your whole lineup. It reads in 0.1mm steps, supports mm/in unit switching, and includes multi-point calibration with the included block (2mm, 10mm, 20mm). Accuracy is +/-0.3mm from 2mm to 20mm and +/-0.5mm over 20mm. Powered by 1x AAA with auto power-off.

The SkyRC Rubber Tire Sander has a 7.2V-12V and can be can be powered by a power supply, as well as powered directly from a LiPo battery (power cables come equipped with 4.0mm bullet plugs). 

The Tire Sander is a quick and easy way to remove the seam from the center of a new tire, without having to take several laps around the track.

Rubber tire sander for touring class, powerful high torque DC motor with dual metal bearings and a lightweight aluminum case.

Getting camber right on a 1/8 car matters, but the usual routine of holding a gauge in place and trying to read tiny markings is not exactly anyone's favorite part of setup. The SKYRC CTG-016 is the cleaner answer - a digital camber gauge sized for 1/8 RC cars that measures both camber and toe, then sends the reading straight to the RC Gears app on your phone. That makes setup changes quicker to read, easier to repeat, and a lot less annoying when you are trying to match both sides properly.

Like the 1/10 version, it uses Bluetooth 5.0 for real-time display, charges by USB-C, and is built from CNC-machined aluminum for stability and durability. It keeps the same +/-17.5 degree measuring range and +/-0.2 degree accuracy, but with the longer 45x12x100mm body sized for 1/8 applications. Weight is 58g, battery capacity is 200mAh, and the whole thing is small enough to live in a pit bag instead of on a shelf where good setup tools go to be forgotten.

This is SKYRC CTG-015 Digital Camber Gauge For 1/10 RC Touring Car. With a nonstop passion for RC car racing, SkyRC upgraded its mechanical predecessor with Bluetooth. The must-have RC Gears app definitely brings smartness to this gauge. Now our racers can measure the RC car's camber and toe angle and read the data on the phone and on the fly! RC suspension tuning made easy and smarter!

When it comes to RC grade racing, so many adjustments can contribute to the handling and performance of the vehicle. Adjusting Camber and Toe are vital adjustments to affect how your touring car performs on the straights and the turns. Toe In/Toe Out can be adjusted to increase or decrease steering and steering response.

Camber is the relationship of the tire to the ground, such that a tire that is perpendicular to the racing surface has zero camber. If the top of the tire leans in toward the car, it has negative camber; likewise, a tire that leans outward at the top has positive camber. Most RC touring cars will benefit from a negative camber degree, resulting in a slightly wider width and more static tire grip on the track surface, benefiting the turns and reducing roll-overs.

On your setup wheels, in your race wheels, or next to your setup station, CTG-015 will give you incredibly accurate readings on the camber angle of your wheels. The toe-tuning and camber-adjusting allow you to achieve your perfect tire wear and traction point. This accurate gauge allows you to tweak your camber and camber gain settings, finding peace of mind that you are following a precise, replicable and trustworthy measurement tool. All data can be read and kept on the phone!

SkyRC CTG-015 Digital Camber Gauge is built with Bluetooth 5.0, which enables a faster and more stable connection. The app instantly displays real-time data once connected. SkyRC Camber & Toe Gauge is even smaller than half iPhone 13 in size, convenient to carry around. The charge port is USB Type-C which is accepted as the de facto connector today, so most mobile phone cables can easily handle the charging.

Features:

• For: 1/10 RC Touring Car
• Material: Metal
• Color: Black
• Empowered edge for RC Gurus
• Camber and Toe Gauge Gets Bluetooth
• App control Real-time Display Via Bluetooth
• High Accuracy
• Measure Camber & Toe
• Small & Portable

Specifications:

• Input Voltage: 5V
• Input Current: 200-300mA
• Interface: Type C
• Working Voltage: 3.4-4.2V
• Working Current: ＜10mA
• Low-voltage Protection: ＜3.4V (Flashes Red)
• Measuring Range: ±17.5°
• Measuring Accuracy: ±0.2°
• Working Temperature: 0℃-50℃
• Working Humidity: 5%-90% (None-condensation)
• Storage Temperature: -10℃-50℃
• Storage Humidity: 1%-75% (None-condensation)

Includes:

• SkyRC CTG-015 Digital Camber Gauge (1 pc)

Cold nitro starts are where starter boxes go to question their life choices. The SKYRC Engine Heater pre-warms .19-.26 RC nitro engines so the piston, sleeve, con-rod and crank are treated a bit less rudely during warm-up.

Powered from a 12V DC source, this compact 90W nitro engine preheater brings the engine up to approximately 60-70C in around 10 minutes, depending on ambient temperature. MCU-controlled heating, a built-in temperature sensor, low voltage cutoff and an automatic safety timer keep the process simple instead of turning pit prep into a small electrical opera.

The adjustable fireproof and heat-resistant cover fits over the engine head, while the top access port lets you check engine temperature without constantly removing the heater. It is especially useful for break-in and cold-day starts on compatible RC nitro cars, buggies, trucks and truggies using .19-.26 engines. Power source required.

SKYRC Part Number: SK-600066.

These are genuine replacement scale pads for the SKYRC SCWS2000 Wireless Corner Weight System. Choose a 1-pack or 2-pack depending on how many pads you need (single or two replacement/spares). Great if you lost a pad, damaged one in your pit bag, or want extras for race travel. Pads pair to the RC Gears app the same way as the original system, and the app lets you assign each pad to any corner position.

Battery is included - each pad ships with a new CR2450 installed so it is ready to use out of the box.

What is included:

• 1x or 2x SKYRC SCWS2000 replacement scale pad(s) (based on your selection)
• 1x or 2x CR2450 battery/batteries (installed, based on your selection)

Important notes:

• Compatible with SKYRC SCWS2000 only
• This listing is for replacement pad(s) only - not a complete 4-corner scale kit
• RC Gears app and an existing SCWS2000 system are required to use these pads

SKYRC Thermologger Duo is a temperature data logger designed for RC enthusiasts who need accurate monitoring of motors, batteries, and electronic speed controllers. It features dual external temperature sensors, enabling real-time measurement of two separate points in your setup. A built-in Bluetooth module connects to the SKYRC mobile app (available for iOS and Android), allowing users to observe live readings, record data, and analyze temperature trends over time.

This device helps identify potential overheating issues, optimize battery health, and improve overall RC performance by providing a clear view of how components heat up under load. With adjustable sampling rates and an onboard memory, it offers flexibility in how frequently data is captured and stored. The compact design allows for easy placement within a variety of remote control models, including cars, boats, and aircraft.

Key Specifications and Features:

• Dual External Sensors: Measures temperatures at two separate points, such as a motor and a battery pack, or an ESC and ambient conditions.
• Bluetooth Connectivity: Pairs with the SkyRC Thermologger app, allowing users to view live data, configure settings, and retrieve logged information.
• Data Logging and Analysis: Records temperature readings for later review, assisting in problem diagnosis and performance tuning.
• Compact Form Factor: Designed for minimal space usage in RC vehicles, with mounting options that accommodate various chassis layouts.
• User-Configurable Sampling: Offers adjustable intervals for temperature recording, enabling detailed tracking or extended run times.
• App-Based Interface: All controls, graphs, and temperature logs are accessed through the mobile application. There is no onboard display, keeping the device lightweight and streamlined.