HobbyStar V2 motors and ESC's now include built-in temperature monitoring and thermal protection to protect your valuable electronics.  When paired with a compatible HobbyStar ESC, the user can set up the system to either reduce or completely cut off power if either the motor, or ESC temperature exceeds the programmed limit. Motors can be run without temperature port connected when paired with ESC's that do not offer temperature monitoring. 

F550 4-pole motor provides excellent torque in a beautiful design, and comes with pre-installed 4.0mm bullet connectors. 

Features:

• 4-pole motor with 12-slot high-torque design
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.35mm) stator laminations 

This is the Leopard Version 2.0 18A Sensorless Brushless ESC.  A great speed control for your 1/18 scale mini or micro RC, comes equipped with a mini-Tamiya style plug for battery conenction and 3.5mm bullet terminals for motor connection.

Features: 

• Compatible with sensorless brushless motors.
• High quality components
• Excellent start-up, acceleration and linearity features.
• Plenty of programmable items
• Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
• Internal timing can be changed easily 
• Easily programmed with the SET button or LED Program Box

Specifications: 

• Output: Continuous 18A, burst 50A. 
• Input: 4-9 cells NiMH/NiCd or 2-3S LiPo. 
• BEC: 6V/1A (Linear mode built-in BEC). 
• Resistance: 0.01 Ohm. 
• Motor Supported: Sensorless Brushless Motor. 
• Suitable Motor: With 4-6 cells NiMH/NiCd or 2S Lipo: On-Road≥12T,  Off-Road≥8T; With 6-9 cells NiMH/NiCd or 3S Lipo: On-Road≥18T,  Off-Road≥24T;
• Suitable Car: 1/18 on-road sport. 
• Cooling Fan: Not included. 
• Size: 31.5mm(L) * 27.5mm(W) * 15mm(H). 
• Weight: 19g (Without wires) 

Includes: 

• (1) 18A ESC
• (2) Zip-ties
• (2) Shrink-tubing
• (1) Double-sided tape
• (1) Instruction manual

HobbyStar V2 motors and ESC's now include built-in temperature monitoring and thermal protection to protect your valuable electronics.  When paired with a compatible HobbyStar ESC, the user can set up the system to either reduce or completely cut off power if either the motor, or ESC temperature exceeds the programmed limit. Motors can be run without temperature port connected when paired with ESC's that do not offer temperature monitoring. 

F540 4-pole motor provides plenty of power in a beautiful design, and comes with pre-installed 4.0mm bullet connectors. 

Features:

• 4-pole motor with 12-slot high-torque design
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.35mm) stator laminations 

Multi-Use shock pliers with a built-in 2.5mm tire punch.

SKYRC Tire Warmer Bands elevate your RC racing experience by pre-heating tires to the ideal temperature, ensuring optimal grip and performance from the start. These bands are designed to fit a wide range of tire sizes, suitable for both 1/10 and 1/8 scale RC cars. By maintaining a consistent temperature, these bands help in achieving a uniform tire performance, crucial for competitive racing.

Simple and efficient, these warmer bands plug directly into the SKYRC tire warmer controller, offering an easy-to-use solution for racers. They can be powered by a 12V DC source or a 3S LiPo battery, providing flexibility for use in various setups. This adaptability ensures that racers can maintain optimal tire conditions, regardless of the power sources available at different racing venues.

Compared to alternatives, SKYRC Tire Warmer Bands stand out for their ease of use and wide compatibility. Unlike some other warmers that may require specific setups or additional equipment, these bands offer a plug-and-play solution that caters to a broad range of tire sizes and types. This universal applicability makes them a preferred choice for many racers looking for a hassle-free tire warming solution.

Impact on performance is significant, as pre-heated tires provide better traction, quicker lap times, and a more predictable handling experience. Racers using SKYRC Tire Warmer Bands can expect their vehicles to perform at their best right from the start, without the need for tires to gradually warm up during the race. This can be the difference between leading the pack and playing catch-up.

The HobbyStar HS-4260HV servo is a HV only (6.0-8.4V) servo with great speed and excellent torque. Combined with all-steel gears for reliable operation and an aluminum center-case to aid in cooling this is an ideal servo for applications where torque is the priority. 

Specifications:

• Speed @6.0V: 0.13 sec
• Speed @8.4V: 0.10 sec
• Torque @6.0V: 225 oz/in
• Torque @8.4V: 277 oz/in
• Pulse/Frequency: 1500µ/330Hz
• PWM Voltage: 3.3V-5.0V
• Dimensions: (LxWxH) 40.5x20x40.5mm
• Weight: 58g
• Bearing: Dual ball bearing
• Gears: Steel
• Motor: Digital Core
• Input Voltage: 6.0V-8.4V
• Output Shaft: 25T spline
• Wire Harness Length: 260mm 

HobbyStar crimping pliers are incredibly heavy-duty and make quick work of crimping a variety of leads on 18-28AWG wire. They work well on connectors such as servo leads, balance leads, Molex type etc. There are a lot of cheap crimping pliers on the market that make this a frustrating task, HobbyStar pliers are the best you'll find at an incredible price!

Features:

• 4 different size crimping areas
• Ratcheting design allows you to lock in terminal first, and then insert wire
• Heavy-duty design for years of dependable use
  
• Large grips provide comfort

The HobbyStar Shock Plier is an ingenious multi-tool that is much more than just a shock plier.  The ingenious design incorporates shock plier function with the capability to hold shock bodies, measure screw and shock-shaft length, press ball-ends on and off of cups and even function as a solder-jig and wrench.

Features:

• Beautifully CNC-machines and anodized in a durable black finish
• Cutouts for 3.0, 3.5 and 4.0mm shafts
• Multiple locations for shock bodies
• Cutouts for holding Dean's (T-plug) and XT60 plugs
• Holes from 2.0 to 7.8mm for holding a wide variety of bullet terminals during soldering
• 4.0 and 5.0mm openings on plier end to function as a wrench (great for turnbuckles)
• Press for installing and removing ball cups
• 2 different areas for measuring fastener and shock shaft length

Monitoring the temperature of your electronics is one of the most critical steps of setting up any system and the key to long-lasting electronics and you can eliminate the guessing with the HT-101 Infrared Thermometer from Hobbystar. Ultra-compact design lets you slip it in your pocket and have it handy for quick, precise temperature readings of motors. ESC's, servos etc.  They even throw in an extra set of batteries!

Features:

• Selectable between C and F
• Data hold
• Low-battery indication
• Auto-power off
• Compact design with built-in clip

Specifications:

• Temp Range: -50C~260C /  -58F~500F
• Temp Accuracy: +/- 2%
• Emissivity: 0.95
• Distance to Spot ratio: 1:1
• Response time and Wavelength: 500ms & (8-14)um
• Power: 2x 1.5V LR44 button battery
• Dimensions: 18x90mm
• Weight: 20g

Monitoring the temperature of your electronics is one of the most critical steps of setting up any system and the key to long-lasting electronics.  You can eliminate the guessing with the HT-188 Infrared Laser Thermometer from Hobbystar. Ergonomic design and built-in laser pointer provide quick, precise temperature readings of motors. ESC's, servos etc.  Easy to read color display.

Features:

• Laser pointer eliminates guessing
• Color display
• Selectable between C and F
• Data hold
• Low-battery indication
• Auto-power off
• Selectable between C and F

Specifications:

• Temp Range: -50C~380C /  -58F~716F
• Temp Accuracy: +/- 2%
• Emissivity: Adjustable from 0.1-1.0
• Distance to Spot ratio: 13:1
• Response time and Wavelength: <1s
• Power: 9V battery (included)

HobbyStar driver sets are crafted with lightweight aluminum handles that feature a knurled surface that provides excellent grip on the tool during use.  An aluminum plug on the end further protects your hands during use and is also removable, allowing you to use the handle for storage of small items. Each driver has the size etched into the handle for easy identification, as well as unique lines on the top of each handle for quick ID in any position. The precision-cut, hardened tips fit fasteners snugly to avoid stripping out and are coated with a titanium nitrate that not only looks great but protects the tips from wear and corrosion.

• Metric Hex Driver Sizes: 1.5mm  2mm  2.5mm 3mm
• Ball End Metric Hex Driver Sizes:  1.5mm  2mm  2.5mm  3mm
• SAE Hex Driver Sizes:  0.05"  1/16"  5/64" 3/32"
• Metric Nut Driver Sizes:  4mm  5.5mm  7mm  8mm
• SAE Nut Driver Sizes:  3/16"  1/4"(x2)  11/32"
• Screwdriver Sizes:  3mm Flat  3mm Phillips  5mm Flat  5mm Phillips

HobbyStar 4pc. Electric Screwdriver Hex Driver Set with standard 1/4" drive end for use in Hobbystar Power Screwdriver and common electric screwdrivers. TiNi coated.

• Tip set includes sizes: 1.5mm  2.0mm  2.5mm 3.0mm

HobbyStar external BECs are specifically designed for demanding applications and therefore have the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns. Simple to install and easily adjustable, HobbyStar BEC's provide peace of mind.

• Output: 5.0V/6A, 5.5V/6A, or 6.0V/6A  (changeable with jumper)
• Input Voltage: 6V-25V (2-6s LiPo; 5-18 cell Ni-XX
• Output Current: 6A Continuous, 10A Burst
• Weight: 18g
• Dimensions: 45 x 23 x 10mm

A modern twist on the classic glow-plug wrench, the HobbyStar Glow Multi-Wrench combines 10MM and 8MM nut drivers with a 3MM and 5MM hex driver for maximum versatility.

Hex drivers are hard-coated for long-life and precision operation.

HobbyStar external BECs are specifically designed for demanding applications and therefore have the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns. Simple to install and easily adjustable, HobbyStar BEC's provide peace of mind.

• Output: 5V/3A or 6V/3A  (changeable with jumper)
• Input Voltage: 6V-25V (2-6s LiPo; 5-18 cell Ni-XX)
• Output Current: 3A Continuous, 8A Burst
• Weight: 7g
• Dimensions: 30 x 9 x 6mm