HobbyStar LiPo packs combine quality components and powerful cells to deliver a superior-power battery for your RC vehicle. Built using the latest technology in cell chemistry to provide generous capacities, powerful discharge ratings and fast charge rates.  HobbyStar LiPo batteries are an unbeatable value!

Sturdy hardcase design for ultimate durability in cars, trucks and buggies.

Specifications:

• Capacity: 5200mAh
• Voltage: 7.4V (2S)
• Discharge Rating: 30C 
• Charge Rate: 2C
• Connector: Multi-Plug
• Wire: 12AWG
• Balance Plug: JST-XH
• Dimensions: 138x46x25mm
• Weight: 252g 

HobbyStar LiPo packs combine quality components and powerful cells to deliver a superior-power battery for your RC vehicle. Built using the latest technology in cell chemistry to provide generous capacities, powerful discharge ratings and fast charge rates.  HobbyStar LiPo batteries are an unbeatable value!

Featuring the HobbyStar Multi-Plug system, battery comes equipped with XT60 connector and includes adapter for EC3™, Dean's™ and Traxxas™ (legacy) style connectors.  (These are plug adapters and not factory plugs, EC3™, Dean's™ and Traxxas™ are registered trademarks of their respective owners).

Specifications:

• Capacity: 5200mAh
• Voltage: 7.4V (2S)
• Discharge Rating: 45C 
• Charge Rate: 2C
• Wire: 12AWG
• Plug Style: HobbyStar Multi-Plug
• Balance Plug: JST-XH
• Dimensions: 133x43x20mm
• Weight: 245g 

The HobbyStar 540 4-pole brushless, sensored crawler motor is an ultra-smooth powerplant for upgrading your crawler to brushless power.  A beautifully machined T6 billet-aluminum housing contains a 4-pole, 12-slot high-torque rotor spinning on High-RPM ABEC5 oversized bearings for a powerful, reliable motor choice for your 1/10 scale vehicle. 

NOTE: Max LiPo cells listed are a guideline for what voltage can be safely run on this motor, but it is still critical to monitor temps and adjust gearing accordingly to keep motor temps under 170F.  Any motor can overheat to the point of failure even when running less than the maximum rated voltage if it is over-geared.  Must adhere to ESC voltage/KV limits as well.

Features:

• Engineered for smooth operation
• 4-pole 12-slot high-torque design
• CNC machined 6061 T6 billet aluminum can
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.2mm) stator laminations 
• Removable/replaceable rotor

The HobbyStar 540 4-pole brushless, sensorless motor is perfect where a high-torque, high-performance powerplant is required.  A beautifully machined T6 billet-aluminum housing contains a 4-pole, 12-slot high-torque rotor spinning on High-RPM ABEC5 oversized bearings for a powerful, reliable motor choice for your 1/10 scale vehicle.  Comes with motor leads with 4.0mm bullet connectors already installed. Available in a wide variety of KV ratings.

Features:

• 4-pole 12-slot high-torque design
• CNC machined 6061 T6 billet aluminum can
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.2mm) stator laminations 
• Removable/replaceable rotor
• Precision Engineered for maximum energy conversion

HobbyStar 540 brushed motors are made of high-quality components and spin on precision ABEC5 bearings. Trail-proven motors that can provide both speed and punch, perfect for a wide variety of rock crawling expeditions.  Available in a variety of turns to match your setup.

Designed with 1/10 scale competition in mind, the HobbyStar 540 brushless, sensored motor packs all the same features as our 540 Competition 1/10 motor but without adjustable can timing for those racers who do not need it. All the other features remain, like precision high RPM ABEC5 bearings and precision engineering for maximum energy conversion to give you the edge you need to win.  Available in a wide variety of turns in both SPEC and MOD versions, all housed in a beautifully machined T6 billet aluminum housing for the ultimate in strength and heat dissipation.  

Features:

• High RPM precision bearings
• CNC machined billet T6 aluminum heatsink can
• High-purity copper windings maximize conductivity
• High-power solder tabs
• Powerful sintered neodymium magnets
• Precision engineered for maximum energy conversion
• Available in both SPEC and MOD versions

The HobbyStar 540 V2 motor is all new from the ground up, the result of refining an already proven design.  HobbyStar motors are known for being one of the smoothest powerplants on the track, and the V2 takes that buttery-smooth operation to the next level with an updated sensor board that even incorporates dual ports for the ultimate in flexibility.  Every component of the V2 motors was evaluated, even the case screws have been upgraded to titanium-nitride coated aluminum units (an industry first). The result is a motor that is lighter, smoother and most importantly even more powerful than ever.

NOTE: 5.5T and below motors are VERY HIGH KV, and are not meant for extended use on 2S as they will easily overheat.  These are intended for drag-race use only where they will see short bursts of use. 

 Features:

• Re-designed motor can for more efficient cooling
• All-new rotor with stronger neodymium magnets
• New stator design is more efficient and yields higher average KV ratings
• Titanium-nitride coated aluminum can screws
• Gold-plated solder tabs
• All-new sensor board with dual sensor ports
• Weighs 20g less than V1 motors

The HobbyStar 540 V3 series motors are the next generation of a championship-winning powerplant that continues to push the boundaries.

Along with looking amazing, the all-new can and stator design maximizes cooling efficiency, to raise the bar yet again.  The V3 Spec-winds have shed an incredible 20g of weight, making it a full 40g lighter than the original, V1 design at only 140g.

Underneath the beautiful can lies an all-new sensor board, stronger magnets in the rotor, lightened stators, and a beefed-up endplate.  Gold-plated solder tabs and titanium-nitride coated aluminum bolts keep it all together while keeping things light. 

Available in SPEC and MOD versions, as well as an all-new MOD-ET version which comes with a high-torque rotor and stator optimized for drag-racing.

Features:

• Re-designed motor can for more efficient cooling
• Increased strength neodymium rotor-magnets
• New stator design is lighter and more efficient
• Titanium-nitride coated aluminum can screws
• Gold-plated solder tabs
• Weighs 20g less than V2 motors
• Available "ET" version for drag-racing with high-torque rotor & ceramic bearings 

HobbyStar 5-slot brushed crawler motors feature an innovative "skewed stator" design that delivers a smooth powerband for excellent control when driving on steep and rocky terrain.  Dual-ball bearings provide peak performance and reliability, while adjustable motor timing allows you to rotate the motor can to dial in for your application. Easy to maintain waterproof design, just dry them out and give them some oil after a wet or muddy run and they'll be ready for another round. If you are looking for a powerful, reliable, economical and versatile powerplant for your crawler look no further!

Features:

• 5-slot armature for ultra-smooth operation
• Adjustable timing
• Waterproof
• Available in a variety of turns
• Pre-soldered leads with bullet plugs
• Dual ball-bearings
• Rebuildable

The HobbyStar 550 4-pole brushless, sensorless motor is based on the same design as our powerhouse 540 sensorless motor, but combines a longer 550 sized and a 5mm shaft for a bulletproof design. The perfect motor when a high-torque, high-performance powerplant is required such as 4x4 short-course trucks.  A beautifully machined T6 billet-aluminum housing contains a 4-pole, 12-slot high-torque rotor spinning on High-RPM ABEC5 oversized bearings for a powerful, reliable motor choice for your 1/10 scale vehicle.  Comes with motor leads with 4.0mm bullet connectors already installed. Available in a wide variety of KV ratings.

Features:

• 4-pole 12-slot high-torque design
• CNC machined 6061 T6 billet aluminum can
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.2mm) stator laminations 
• Removable/replaceable rotor
• Precision Engineered for maximum energy conversion

HobbyStar 550 brushed crawler motors feature a robust design to stand up to grueling environments and even feature a built-in fan to help keep things cool.  Dual-ball bearings provide peak performance and reliability, and the 3-slot construction provides smooth throttle control for your crawler. Easy to maintain waterproof design, just dry them out and give them some oil after a wet or muddy run and they'll be ready for another round. If you are looking for a powerful, reliable, economical and versatile powerplant for your crawler look no further!

Features:

• 3-slot armature
• Adjustable timing
• Waterproof
• Available in a variety of turns
• Pre-soldered leads with bullet plugs
• Dual ball-bearings
• Rebuildable

HobbyStar 5-slot brushed crawler motors feature an innovative "skewed stator" design that delivers a smooth powerband for excellent control when driving on steep and rocky terrain.  This new 550 motor delivers nearly DOUBLE the starting torque of the 540 version. Dual-ball bearings provide peak performance and reliability, while adjustable motor timing allows you to rotate the motor can to dial in for your application. Easy to maintain waterproof design, just dry them out and give them some oil after a wet or muddy run and they'll be ready for another round. If you are looking for a powerful, reliable, economical and versatile powerplant for your crawler look no further!

Features:

• 5-slot armature for ultra-smooth operation
• Adjustable timing
• Waterproof
• Available in a variety of turns
• Pre-soldered leads with bullet plugs
• Dual ball-bearings
• Rebuildable

Introducing the HobbyStar 5600mAh 3S 60C LiPo Battery - a powerhouse designed for the avid RC enthusiast. This high-capacity battery ensures longer run times for your RC cars, trucks, boats, and rock crawlers, enhancing your control experience with sustained performance.

Why Choose HobbyStar's 5600mAh Battery? Its 60C discharge rate provides the high-power output needed for demanding applications, ensuring your RC vehicle responds swiftly to your commands. The multi-plug feature, including an XT60 connector with adapters for T/TR/EC3, offers unparalleled compatibility across a range of devices.

Designed for Durability and Performance, this LiPo battery is encased in a soft yet resilient covering, safeguarding it from the rigors of intense use. Its dimensions and weight are meticulously calibrated to fit a variety of models without compromising balance or agility.

Optimal Usage and Compatibility - The HobbyStar battery is not just about power; it's about precision. Whether you're racing on a track, navigating rocky terrains, or enjoying a leisurely sail, this battery adapts to your needs, providing a reliable power source for diverse RC adventures.

HobbyStar LiPo packs combine quality components and powerful cells to deliver a superior-power battery for your RC vehicle. Built using the latest technology in cell chemistry to provide generous capacities, powerful discharge ratings and fast charge rates.  100C rating for the ultimate performance in race vehicles.  HobbyStar LiPo batteries are an unbeatable value!

High-Voltage packs provide 3.8V per cell instead of the standard 3.7V for that extra boost of power!

Sturdy hardcase design for ultimate durability in cars, trucks and buggies.  Shorty design to allow forward or rearward mounting to aid in vehicle tuning.

Specifications:

• Capacity: 5600mAh
• Voltage: 7.6V (2S HV)
• Discharge Rating: 100C 
• Charge Rate: 2C
• Wire: 12AWG
• Plug: Deans Style
• Terminals: 4.0mm
• Balance Plug: JST-XH
• Dimensions: 96x46.5x25mm
• Weight: 220g 

1/5 scale vehicles require some serious horsepower and the HobbyStar 56112 1/5 scale motor delivers the power you need.  With an industry leading 24 slot stator and a 4-pole precision-balanced, Kevlar-wrapped rotor riding on buttery-smooth ABEC5 bearings all housed in a beautifully CNC machined T6 6061 billet-aluminum housing you'll harness next-level power for your large-scale RC! Extra long 200mm motor leads with gold-plated terminals already installed make installation a snap.

Features:

• 4-Pole 24 Slot high-torque motor design        
• CNC machined 6061 T6 billet aluminum heatsink can        
• High purity copper windings maximize efficiency        
• High RPM ABEC5 oversized bearings
• Universal fit with multiple M4 mounting holes       
• Precision balanced Kevlar-wrapped rotor, smoothness for best reliability and maximum RPM        
• Stator - Super thin (0.2mm) laminations        
• Removable/Replaceable rotor        
• Precision engineered for maximum energy conversion