HobbyStar V2 ESC's feature built-in temperature monitoring for both ESC and motor to help protect your valuable electronics.  ESC and motor temperature protection parameters can be programmed individually via the HobbyStar V2 LED Program Card (must use a compatible HobbyStar motor for motor temperature features).

Waterproof design keeps you going through wherever your drive takes you, and a powerful built-in 5.8V/5A BEC provides the juice to keep power-hungry servos working at their peak.  

Comes with pre-installed 4.0mm motor terminals, and an XT60 connector on the power leads with an included Dean's-style adapter.

Features:

• Waterproof design
• Built-in fan
• Powerful 5.8V/5A BEC
• Programmable ESC and motor thermal protection (must use compatible motor) 
• Fully programmable via HobbyStar V2 LED Program Card

Specifications:

• Cont/Burst Current: 100A/520A
• Input: 2-4S LiPo, 4-12 Cell NiMh
• 2S LiPo, 6 Cell NiMh Motor Limit: 3674 or smaller, <6000KV On-road, 4000KV Off-road
• 3S LiPo, 9 Cell NiMh Motor Limit: 3674 or smaller, <4000KV On-road, 3000KV Off-road
• 4S LiPo, 12 Cell NiMh Motor Limit: 3674 or smaller, <3000KV On-road, 2000KV Off-road
• For 1/10 Scale Cars
• Resistance: 0.0004ohm
• BEC: 5.8V/5A switch-mode
• Dimensions: 50x35x34mm
• Motor Leads: 4.0mm bullet-plugs
• Battery Plug: XT60 (Dean's-style adapter included)
• Weight: 81g

A terrific all-around ESC, the HobbyStar 60A Brushless ESC packs a lot of features without breaking the bank.  Smooth-operation, a built in BEC and plenty of available adjustments via LED program card and it even comes with silicone wire leads already soldered on (4.0mm bullet-plugs on motor wires and a Dean’s-style t-plug on power leads). Sensored design means it can be run with sensored or sensorless brushless motors.

FEATURES:

• Enhanced throttle response, smooth acceleration, strong brake function and linear throttle
• High-quality components, high-current capable
• Excellent start-up, acceleration and linearity
• Built-in 6V, 3A Linear BEC
• Sensor port for running sensored motors (can also run sensorless)
• Fully programmable, can be programmed with LED Program Box
• Multiple protection features: Low voltage cut-off, Overheat protection, Throttle signal loss protection

SPECIFICATIONS:

• Output: Continuous 60A, Burst 380A
• Input: 5-10 cells NiMH/NiCd or 2-3S LiPo
• BEC: 6V/2A 
• Resistance: 0.0007 ohm
• Motor supported: Brushless sensored/sensorless
• Application: 1/12, 1/10 on and off-road car (not recommended for heavy 4x4 applications or larger than 540 sized motor)
• Programmable items: motor timing, initial acceleration, running mode, brake %, drag brake, cut-off voltage, throttle limit,  motor rotation, & neutral range
• Size: 42mm(L) x 28mm(W) x 25m(H, to top of heat-sink)
• Weight: 60g (without wires)

HobbyStar V2 ESC's feature built-in temperature monitoring for both ESC and motor to help protect your valuable electronics.  ESC and motor temperature protection parameters can be programmed individually via the HobbyStar V2 LED Program Card (must use a compatible HobbyStar motor for motor temperature features).

Waterproof design keeps you going through wherever your drive takes you, and a powerful built-in 5.8V/5A BEC provides the juice to keep power-hungry servos working at their peak.  

Comes with pre-installed 4.0mm motor terminals, and an XT60 connector on the power leads with an included Dean's-style adapter.

Features:

• Waterproof design
• Built-in fan
• Powerful 5.8V/5A BEC
• Programmable ESC and motor thermal protection (must use compatible motor) 
• Fully programmable via HobbyStar V2 LED Program Card

Specifications:

• Cont/Burst Current: 80A/480A
• Input: 2-3S LiPo, 4-9 Cell NiMh
• 2S LiPo, 6 Cell NiMh Motor Limit: 3665 or smaller, <6000KV On-road, 4000KV Off-road
• 3S LiPo, 9 Cell NiMh Motor Limit: 3665 or smaller, <4000KV On-road, 3000KV Off-road
• For 1/10 Scale Cars
• Resistance: 0.0005ohm
• BEC: 5.8V/5A switch-mode
• Dimensions: 50x35x34mm
• Motor Leads: 4.0mm bullet-plugs
• Battery Plug: XT60 (Dean's-style adapter included)
• Weight: 81g

HobbyStar V2 ESC's feature built-in temperature monitoring for both ESC and motor to help protect your valuable electronics.  ESC and motor temperature protection parameters can be programmed individually via the HobbyStar V2 LED Program Card (must use a compatible HobbyStar motor for motor temperature features).

Waterproof design keeps you going through wherever your drive takes you, and a powerful built-in 5.8V/5A BEC provides the juice to keep power-hungry servos working at their peak.  

Comes with pre-installed 4.0mm motor terminals, and an XT60 connector on the power leads with an included Dean's-style adapter.

Features:

• Waterproof design
• Built-in fan
• Powerful 5.8V/5A BEC
• Programmable ESC and motor thermal protection (must use compatible motor) 
• Fully programmable via HobbyStar V2 LED Program Card

Specifications:

• Cont/Burst Current: 60A/360A
• Input: 2-3S LiPo, 4-9 Cell NiMh
• 2S LiPo, 6 Cell NiMh Motor Limit: 3660 or smaller, <6000KV On-road, 4000KV Off-road
• 3S LiPo, 9 Cell NiMh Motor Limit: 3660 or smaller, <4000KV On-road, 3000KV Off-road
• For 1/10 Scale Cars
• Resistance: 0.0007ohm
• BEC: 5.8V/5A switch-mode
• Dimensions: 50x35x34mm
• Motor Leads: 4.0mm bullet-plugs
• Battery Plug: XT60 (Dean's-style adapter included)
• Weight: 81g

HobbyStar V2 ESC's feature built-in temperature monitoring for both ESC and motor to help protect your valuable electronics.  ESC and motor temperature protection parameters can be programmed individually via the HobbyStar V2 LED Program Card (must use a compatible HobbyStar motor for motor temperature features).

Waterproof design keeps you going through wherever your drive takes you, and a powerful built-in 5.8V/5A BEC provides the juice to keep power-hungry servos working at their peak.  

Comes with pre-installed 4.0mm motor terminals, and an XT60 connector on the power leads with an included Dean's-style adapter.

Features:

• Waterproof design
• Built-in fan
• Powerful 5.8V/5A BEC
• Programmable ESC and motor thermal protection (must use compatible motor) 
• Fully programmable via HobbyStar V2 LED Program Card

Specifications:

• Cont/Burst Current: 45A/240A
• Input: 2-3S LiPo, 4-9 Cell NiMh
• 2S LiPo, 6 Cell NiMh Motor Limit: 3650 or smaller, <5600KV On-road, 3900KV Off-road
• 3S LiPo, 9 Cell NiMh Motor Limit: 3650 or smaller, <3800KV On-road, 2700KV Off-road
• For 1/10 Scale Cars
• Resistance: 0.0014ohm
• BEC: 5.8V/5A switch-mode
• Dimensions: 50x35x34mm
• Motor Leads: 4.0mm bullet-plugs
• Battery Plug: XT60 (Dean's-style adapter included)
• Weight: 81g

HobbyStar brushed crawler ESC's are a simple and reliable powerplant for your crawling rig, they provide instant forward/reverse operation and necessary drag-brake.  Waterproof design for use in all conditions, they also feature a unique removable switch that can be slid on and off from the ESC or mounted remotely.  

Must use HobbyStar brushed ESC program card to program.  

Features:

• Single setting: forward/reverse w/drag brake
• Pre-wired: Tamiya style power plug and 3.5mm motor bullets
• Removable switch
• LiPo/NiMH compatibility via jumper 
• Adjustable parameters: start force, voltage cutoff, drag brake, reverse, start mode

Specifications:

• Continuous/Burst Current: 60A/320A
• Input: 2-3S LiPo, 4-9 Cells NiMH
• BEC: 7.4V/2A (switch mode)
• Connector: Tamiya, 3.5mm motor
• Case Size: 37x32x18mm
• Weight: 40g

This is the Leopard Version 2.0 18A Sensorless Brushless ESC.  A great speed control for your 1/18 scale mini or micro RC, comes equipped with a mini-Tamiya style plug for battery conenction and 3.5mm bullet terminals for motor connection.

Features: 

• Compatible with sensorless brushless motors.
• High quality components
• Excellent start-up, acceleration and linearity features.
• Plenty of programmable items
• Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
• Internal timing can be changed easily 
• Easily programmed with the SET button or LED Program Box

Specifications: 

• Output: Continuous 18A, burst 50A. 
• Input: 4-9 cells NiMH/NiCd or 2-3S LiPo. 
• BEC: 6V/1A (Linear mode built-in BEC). 
• Resistance: 0.01 Ohm. 
• Motor Supported: Sensorless Brushless Motor. 
• Suitable Motor: With 4-6 cells NiMH/NiCd or 2S Lipo: On-Road≥12T,  Off-Road≥8T; With 6-9 cells NiMH/NiCd or 3S Lipo: On-Road≥18T,  Off-Road≥24T;
• Suitable Car: 1/18 on-road sport. 
• Cooling Fan: Not included. 
• Size: 31.5mm(L) * 27.5mm(W) * 15mm(H). 
• Weight: 19g (Without wires) 

Includes: 

• (1) 18A ESC
• (2) Zip-ties
• (2) Shrink-tubing
• (1) Double-sided tape
• (1) Instruction manual