HobbyStar LiPo packs combine quality components and powerful cells to deliver a superior-power battery for your RC vehicle. Built using the latest technology in cell chemistry to provide generous capacities, powerful discharge ratings and fast charge rates.  HobbyStar LiPo batteries are an unbeatable value!

Specifications:

• Capacity: 3300mAh
• Voltage: 7.4V (2S)
• Discharge Rating: 30C 
• Charge Rate: 2C
• Wire: 12AWG
• Balance Plug: JST-XH
• Dimensions: 133x43x16mm
• Weight: 210g 
• Plug: XT60

Multi-Use shock pliers with a built-in 2.5mm tire punch.

The HobbyStar Shock Plier is an ingenious multi-tool that is much more than just a shock plier.  The ingenious design incorporates shock plier function with the capability to hold shock bodies, measure screw and shock-shaft length, press ball-ends on and off of cups and even function as a solder-jig and wrench.

Features:

• Beautifully CNC-machines and anodized in a durable black finish
• Cutouts for 3.0, 3.5 and 4.0mm shafts
• Multiple locations for shock bodies
• Cutouts for holding Dean's (T-plug) and XT60 plugs
• Holes from 2.0 to 7.8mm for holding a wide variety of bullet terminals during soldering
• 4.0 and 5.0mm openings on plier end to function as a wrench (great for turnbuckles)
• Press for installing and removing ball cups
• 2 different areas for measuring fastener and shock shaft length

• The HobbyStar Carbon Solder Jig is a small and lightweight tool designed to quickly and easily hold your wires, Deans, XT60 and bullet connectors to make convenient work of your soldering needs.
• Featuring a spring loading sliding movement, the jig opens up when compressed allowing you to insert your wires or connectors. When compression is released, the spring loaded bottom plate pulls back with clamping force, providing a secure hold while you work.
• The jig features a rectangular 17x10mm slot that securely fits Deans/T-Style and XT60 sized connectors, as well as two 8mm holes to fit the bullet connector of your choice. If you just need to solder or tin wires, the vertical posts open up to 10mm providing plenty of space for a variety of wire AWG's. To keep the jig planted, four rubber feet on the bottom keep it from moving around while you work.
• Weight: 55g Dimension: 70x60x30mm Material: Carbon Fiber
• Warning: Carbon Fiber conducts electricity! Never insert two bullet connectors from a battery into the 8mm bullet holes at the same time!

HobbyStar LiPo packs combine quality components and powerful cells to deliver a superior-power battery for your RC vehicle. Built using the latest technology in cell chemistry to provide generous capacities, powerful discharge ratings and fast charge rates.  HobbyStar LiPo batteries are an unbeatable value!

Specifications:

• Capacity: 2200mAh
• Voltage: 11.1V (3S)
• Discharge Rating: 50C 
• Plug Style: XT60
• Charge Rate: 2C
• Wire: 14AWG
• Balance Plug: JST-XH
• Dimensions: 100x34x25mm
• Weight: 185g 

HobbyStar LiPo packs combine quality components and powerful cells to deliver a superior-power battery for your RC vehicle. Built using the latest technology in cell chemistry to provide generous capacities, powerful discharge ratings and fast charge rates.  HobbyStar LiPo batteries are an unbeatable value!

Specifications:

• Capacity: 1500mAh
• Voltage: 11.1V (3S)
• Discharge Rating: 110C 
• Charge Rate: 2C
• Plug Style: XT60
• Balance Plug: JST-XH
• Dimensions: 60x42x20mm
• Weight: 140g 

For SkyRC chargers only, not for ESC's or other components. 

SkyRC Bluetooth Dongle lets you establish a connection between SkyRC charger and your smart phone to control and monitor the charger via the SkyCharger App.

Bluetooth 5.0

Compared to previous BLE 4.2, BLE 5.0 significantly increases the range, speed, and broadcast messaging capacity of Bluetooth applications, bringing more peace of mind to users. Paired and ready instantly

Thanks to BLE’s emphasis on wake and sleep modes, the plugged dongle that isn’t in use can remain in sleep mode indefinitely; it can also wake from that sleep mode in an instant, paired and ready to communicate with a smartphone.

Customized for chargers by SkyRC

With the innovative Scan to Go, RC enthusiasts can just scan and charge/discharge with a unique generated QR code for every single battery

In the know, monitor the status information data at a glance

Specifications:

• Case Size: 45x25x13mm
• Weight: 9g
• Input Voltage:4.5V-5.5V
• Input Current: =20mA
• Working Power: 110mW Max
• Bluetooth Version: 5.0
• Range: 15M
• Interface: Micro USB
• Bluetooth Status:
• LED flashes blue: ready for connection
• LED remains solid blue: connected

HobbyStar LiPo packs combine quality components and powerful cells to deliver a superior-power battery for your RC vehicle. Built using the latest technology in cell chemistry to provide generous capacities, powerful discharge ratings and fast charge rates.  HobbyStar LiPo batteries are an unbeatable value!

Featuring the HobbyStar Multi-Plug system, battery comes equipped with XT60 connector and includes adapter for EC3™, Dean's™ and Traxxas™ (legacy) style connectors.  (These are plug adapters and not factory plugs, EC3™, Dean's™ and Traxxas™ are registered trademarks of their respective owners).

Specifications:

• Capacity: 1300mAh
• Voltage: 14.8V (4S)
• Discharge Rating: 35C 
• Charge Rate: 2C
• Wire: 14AWG
• Plug Style: HobbyStar Multi-Plug
• Balance Plug: JST-XH
• Dimensions: 68x34x31mm
• Weight: 140g 

HobbyStar external BECs are specifically designed for demanding applications and therefore have the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns. Simple to install and easily adjustable, HobbyStar BEC's provide peace of mind.

• Output: 5.0V/6A, 5.5V/6A, or 6.0V/6A  (changeable with jumper)
• Input Voltage: 6V-25V (2-6s LiPo; 5-18 cell Ni-XX
• Output Current: 6A Continuous, 10A Burst
• Weight: 18g
• Dimensions: 45 x 23 x 10mm

Monitoring the temperature of your electronics is one of the most critical steps of setting up any system and the key to long-lasting electronics and you can eliminate the guessing with the HT-101 Infrared Thermometer from Hobbystar. Ultra-compact design lets you slip it in your pocket and have it handy for quick, precise temperature readings of motors. ESC's, servos etc.  They even throw in an extra set of batteries!

Features:

• Selectable between C and F
• Data hold
• Low-battery indication
• Auto-power off
• Compact design with built-in clip

Specifications:

• Temp Range: -50C~260C /  -58F~500F
• Temp Accuracy: +/- 2%
• Emissivity: 0.95
• Distance to Spot ratio: 1:1
• Response time and Wavelength: 500ms & (8-14)um
• Power: 2x 1.5V LR44 button battery
• Dimensions: 18x90mm
• Weight: 20g

Monitoring the temperature of your electronics is one of the most critical steps of setting up any system and the key to long-lasting electronics.  You can eliminate the guessing with the HT-188 Infrared Laser Thermometer from Hobbystar. Ergonomic design and built-in laser pointer provide quick, precise temperature readings of motors. ESC's, servos etc.  Easy to read color display.

Features:

• Laser pointer eliminates guessing
• Color display
• Selectable between C and F
• Data hold
• Low-battery indication
• Auto-power off
• Selectable between C and F

Specifications:

• Temp Range: -50C~380C /  -58F~716F
• Temp Accuracy: +/- 2%
• Emissivity: Adjustable from 0.1-1.0
• Distance to Spot ratio: 13:1
• Response time and Wavelength: <1s
• Power: 9V battery (included)

HobbyStar LiPo packs combine quality components and powerful cells to deliver a superior-power battery for your RC vehicle. Built using the latest technology in cell chemistry to provide generous capacities, powerful discharge ratings and fast charge rates.  HobbyStar LiPo batteries are an unbeatable value!

Specifications:

• Capacity: 2200mAh
• Voltage: 7.4V (2S)
• Discharge Rating: 50C 
• Plug Style: HobbyStar Multi-Plug
• Charge Rate: 2C
• Wire: 14AWG
• Balance Plug: JST-XH
• Dimensions: 100x34x17.5mm
• Weight: 130g 

HobbyStar driver sets are crafted with lightweight aluminum handles that feature a knurled surface that provides excellent grip on the tool during use.  An aluminum plug on the end further protects your hands during use and is also removable, allowing you to use the handle for storage of small items. Each driver has the size etched into the handle for easy identification, as well as unique lines on the top of each handle for quick ID in any position. The precision-cut, hardened tips fit fasteners snugly to avoid stripping out and are coated with a titanium nitrate that not only looks great but protects the tips from wear and corrosion.

• Metric Hex Driver Sizes: 1.5mm  2mm  2.5mm 3mm
• Ball End Metric Hex Driver Sizes:  1.5mm  2mm  2.5mm  3mm
• SAE Hex Driver Sizes:  0.05"  1/16"  5/64" 3/32"
• Metric Nut Driver Sizes:  4mm  5.5mm  7mm  8mm
• SAE Nut Driver Sizes:  3/16"  1/4"(x2)  11/32"
• Screwdriver Sizes:  3mm Flat  3mm Phillips  5mm Flat  5mm Phillips

StarLink USB link for use with all HobbyStar Car ESC's except 45A and 60A ESC (45A/60A ESC require LED Program Card). Also for 120A-155A Aaircraft ESC's. Includes USB cable for connecting ESC to your PC to make adjustments.

A modern twist on the classic glow-plug wrench, the HobbyStar Glow Multi-Wrench combines 10MM and 8MM nut drivers with a 3MM and 5MM hex driver for maximum versatility.

Hex drivers are hard-coated for long-life and precision operation.