165 products
165 products
Sort by:
HobbyStar LiPo packs combine quality components and powerful cells to deliver a superior-power battery for your RC vehicle. Built using the latest technology in cell chemistry to provide generous capacities, powerful discharge ratings and fast charge rates. HobbyStar LiPo batteries are an unbeatable value!
Specifications:
- Capacity: 1600mAh
- Voltage: 14.8V (4S)
- Discharge Rating: 120C
- Charge Rate: 2C
- Plug Style: XT60
- Balance Plug: JST-XH
- Dimensions: 63x44x29mm
- Weight: 175g
When you need a basic brushless motor, the HobbyStar 3650 brushless, sensorless 2-pole motor is the perfect choice. A beautifully machined T6 billet-aluminum housing contains a 2-pole rotor spinning on high-quality, buttery-smooth bearings for a powerful, reliable motor choice for your 1/10 scale vehicle. Comes with motor leads with 4.0mm bullet connectors already installed. Available in a wide variety of KV ratings.
Features:
- CNC machined 6061 T6 billet aluminum can
- High-purity copper windings maximize efficiency
- Short stator for less resistance and maximum power
- High-speed bearings
- Precision balanced rotor for smooth operation and maximum RPM
- Precision Engineered for maximum energy conversion
This new Dongle is compatible both with SKYRC Chargers and the new SKYRC TS-160 PRO ESC.
Bluetooth 5.0. Compared to previous BLE 4.2, BLE 5.0 significantly increases the range, speed, and broadcast messaging capacity of Bluetooth applications, bringing more peace of mind to users. Paired and ready instantly
Thanks to BLE’s emphasis on wake and sleep modes, the plugged dongle that isn’t in use can remain in sleep mode indefinitely; it can also wake from that sleep mode in an instant, paired and ready to communicate with a smartphone.
SKYRC Part Number SK-600135-02
SKYRC Thermologger Duo is a temperature data logger designed for RC enthusiasts who need accurate monitoring of motors, batteries, and electronic speed controllers. It features dual external temperature sensors, enabling real-time measurement of two separate points in your setup. A built-in Bluetooth module connects to the SKYRC mobile app (available for iOS and Android), allowing users to observe live readings, record data, and analyze temperature trends over time.
This device helps identify potential overheating issues, optimize battery health, and improve overall RC performance by providing a clear view of how components heat up under load. With adjustable sampling rates and an onboard memory, it offers flexibility in how frequently data is captured and stored. The compact design allows for easy placement within a variety of remote control models, including cars, boats, and aircraft.
Key Specifications and Features:
- Dual External Sensors: Measures temperatures at two separate points, such as a motor and a battery pack, or an ESC and ambient conditions.
- Bluetooth Connectivity: Pairs with the SkyRC Thermologger app, allowing users to view live data, configure settings, and retrieve logged information.
- Data Logging and Analysis: Records temperature readings for later review, assisting in problem diagnosis and performance tuning.
- Compact Form Factor: Designed for minimal space usage in RC vehicles, with mounting options that accommodate various chassis layouts.
- User-Configurable Sampling: Offers adjustable intervals for temperature recording, enabling detailed tracking or extended run times.
- App-Based Interface: All controls, graphs, and temperature logs are accessed through the mobile application. There is no onboard display, keeping the device lightweight and streamlined.
HobbyStar LiPo packs combine quality components and powerful cells to deliver a superior-power battery for your RC vehicle. Built using the latest technology in cell chemistry to provide generous capacities, powerful discharge ratings and fast charge rates. HobbyStar LiPo batteries are an unbeatable value!
Specifications:
- Capacity: 1500mAh
- Voltage: 14.8V (4S)
- Discharge Rating: 110C
- Charge Rate: 2C
- Plug Style: XT60
- Balance Plug: JST-XH
- Dimensions: 80x34x32mm
- Weight: 180g
The HobbyStar HS-4309LV servo is a super-speed servo with great torque at a terrific price. Combined with all-steel gears for reliable operation and an aluminum center-case to aid in cooling and add strength, this is an ideal servo for 1/10 applications.
Specifications:
- Speed @4.8V: 0.09 sec
- Speed @6.0V: 0.07 sec
- Torque @4.8V: 106 oz/in
- Torque @6.0V: 139 oz/in
- Pulse/Frequency: 1500µ/330Hz
- Dimensions: (LxWxH) 40.5x20x40.5mm
- Weight: 57g
- Bearing: Dual ball bearing
- Gears: Steel
- Motor: Digital Core
- Input Voltage: 4.8V-6.0V
- Output Shaft: 25T spline
- Wire Harness Length: 260mm
SKYRC Tire Warmer Bands elevate your RC racing experience by pre-heating tires to the ideal temperature, ensuring optimal grip and performance from the start. These bands are designed to fit a wide range of tire sizes, suitable for both 1/10 and 1/8 scale RC cars. By maintaining a consistent temperature, these bands help in achieving a uniform tire performance, crucial for competitive racing.
Simple and efficient, these warmer bands plug directly into the SKYRC tire warmer controller, offering an easy-to-use solution for racers. They can be powered by a 12V DC source or a 3S LiPo battery, providing flexibility for use in various setups. This adaptability ensures that racers can maintain optimal tire conditions, regardless of the power sources available at different racing venues.
Compared to alternatives, SKYRC Tire Warmer Bands stand out for their ease of use and wide compatibility. Unlike some other warmers that may require specific setups or additional equipment, these bands offer a plug-and-play solution that caters to a broad range of tire sizes and types. This universal applicability makes them a preferred choice for many racers looking for a hassle-free tire warming solution.
Impact on performance is significant, as pre-heated tires provide better traction, quicker lap times, and a more predictable handling experience. Racers using SKYRC Tire Warmer Bands can expect their vehicles to perform at their best right from the start, without the need for tires to gradually warm up during the race. This can be the difference between leading the pack and playing catch-up.
HobbyStar V2 ESC's feature built-in temperature monitoring for both ESC and motor to help protect your valuable electronics. ESC and motor temperature protection parameters can be programmed individually via the HobbyStar V2 LED Program Card (must use a compatible HobbyStar motor for motor temperature features).
Waterproof design keeps you going through wherever your drive takes you, and a powerful built-in 5.8V/5A BEC provides the juice to keep power-hungry servos working at their peak.
Comes with pre-installed 4.0mm motor terminals, and an XT60 connector on the power leads with an included Dean's-style adapter.
Features:
- Waterproof design
- Built-in fan
- Powerful 5.8V/5A BEC
- Programmable ESC and motor thermal protection (must use compatible motor)
- Fully programmable via HobbyStar V2 LED Program Card
Specifications:
- Cont/Burst Current: 45A/240A
- Input: 2-3S LiPo, 4-9 Cell NiMh
- 2S LiPo, 6 Cell NiMh Motor Limit: 3650 or smaller, <5600KV On-road, 3900KV Off-road
- 3S LiPo, 9 Cell NiMh Motor Limit: 3650 or smaller, <3800KV On-road, 2700KV Off-road
- For 1/10 Scale Cars
- Resistance: 0.0014ohm
- BEC: 5.8V/5A switch-mode
- Dimensions: 50x35x34mm
- Motor Leads: 4.0mm bullet-plugs
- Battery Plug: XT60 (Dean's-style adapter included)
- Weight: 81g
The HobbyStar HS-4260HV servo is a HV only (6.0-8.4V) servo with great speed and excellent torque. Combined with all-steel gears for reliable operation and an aluminum center-case to aid in cooling this is an ideal servo for applications where torque is the priority.
Specifications:
- Speed @6.0V: 0.13 sec
- Speed @8.4V: 0.10 sec
- Torque @6.0V: 225 oz/in
- Torque @8.4V: 277 oz/in
- Pulse/Frequency: 1500µ/330Hz
- PWM Voltage: 3.3V-5.0V
- Dimensions: (LxWxH) 40.5x20x40.5mm
- Weight: 58g
- Bearing: Dual ball bearing
- Gears: Steel
- Motor: Digital Core
- Input Voltage: 6.0V-8.4V
- Output Shaft: 25T spline
- Wire Harness Length: 260mm
This is the Leopard Version 2.0 18A Sensorless Brushless ESC. A great speed control for your 1/18 scale mini or micro RC, comes equipped with a mini-Tamiya style plug for battery conenction and 3.5mm bullet terminals for motor connection.
Features:
- Compatible with sensorless brushless motors.
- High quality components
- Excellent start-up, acceleration and linearity features.
- Plenty of programmable items
- Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
- Internal timing can be changed easily
- Easily programmed with the SET button or LED Program Box
Specifications:
- Output: Continuous 18A, burst 50A.
- Input: 4-9 cells NiMH/NiCd or 2-3S LiPo.
- BEC: 6V/1A (Linear mode built-in BEC).
- Resistance: 0.01 Ohm.
- Motor Supported: Sensorless Brushless Motor.
- Suitable Motor: With 4-6 cells NiMH/NiCd or 2S Lipo: On-Road≥12T, Off-Road≥8T; With 6-9 cells NiMH/NiCd or 3S Lipo: On-Road≥18T, Off-Road≥24T;
- Suitable Car: 1/18 on-road sport.
- Cooling Fan: Not included.
- Size: 31.5mm(L) * 27.5mm(W) * 15mm(H).
- Weight: 19g (Without wires)
Includes:
- (1) 18A ESC
- (2) Zip-ties
- (2) Shrink-tubing
- (1) Double-sided tape
- (1) Instruction manual
HobbyStar capacitor packs are ideal for high-current applications like drag-racing and speed-runs. Capacitors act like small reserves of power for when the battery is unable to keep up with demand and keep voltage from sagging (ripple current) keeping your electronics running at peak performance.
Specifications:
- Compatible Packs: 2S-12S LiPo pack
- Maximum Voltage: 63V
- Dimensions: 75x43x18mm
- Weight: 80g
- Wire: 10AWG
- Capacitors: 4x 2200UF
HobbyStar LiPo packs combine quality components and powerful cells to deliver a superior-power battery for your RC vehicle. Built using the latest technology in cell chemistry to provide generous capacities, powerful discharge ratings and fast charge rates. HobbyStar LiPo batteries are an unbeatable value!
Specifications:
- Capacity: 1300mAh
- Voltage: 22.2V (6S)
- Discharge Rating: 35C
- Charge Rate: 2C
- Plug Style: XT60
- Balance Plug: JST-XH
- Dimensions: 69x39x34mm
- Weight: 200g
HobbyStar LiPo packs combine quality components and powerful cells to deliver a superior-power battery for your RC vehicle. Built using the latest technology in cell chemistry to provide generous capacities, powerful discharge ratings and fast charge rates. HobbyStar LiPo batteries are an unbeatable value!
Specifications:
- Capacity: 2200mAh
- Voltage: 11.1V (3S)
- Discharge Rating: 120C
- Charge Rate: 2C
- Plug Style: XT60
- Balance Plug: JST-XH
- Dimensions: 105x34x24mm
- Weight: 180g
HobbyStar LiPo packs combine quality components and powerful cells to deliver a superior-power battery for your RC vehicle. Built using the latest technology in cell chemistry to provide generous capacities, powerful discharge ratings and fast charge rates. HobbyStar LiPo batteries are an unbeatable value!
Specifications:
- Capacity: 4200mAh
- Voltage: 7.4V (2S)
- Discharge Rating: 40C
- Charge Rate: 2C
- Wire: 12AWG
- Balance Plug: JST-XH
- Dimensions: 134x44x14mm
- Weight: 195g
- Plug: Multi-Plug
HobbyStar 5-slot brushed crawler motors feature an innovative "skewed stator" design that delivers a smooth powerband for excellent control when driving on steep and rocky terrain. This new 550 motor delivers nearly DOUBLE the starting torque of the 540 version. Dual-ball bearings provide peak performance and reliability, while adjustable motor timing allows you to rotate the motor can to dial in for your application. Easy to maintain waterproof design, just dry them out and give them some oil after a wet or muddy run and they'll be ready for another round. If you are looking for a powerful, reliable, economical and versatile powerplant for your crawler look no further!
Features:
- 5-slot armature for ultra-smooth operation
- Adjustable timing
- Waterproof
- Available in a variety of turns
- Pre-soldered leads with bullet plugs
- Dual ball-bearings
- Rebuildable