SKYRC 1/10 Buggy Setup Station

Thanks to this setup system set in elegant black, which was specially designed for 1/10 buggies, almost all important parameters can be optimized conveniently and easily. After all, the better a RC car is set up, the more fun it gets when racing on the next track.

Adjustable Parameters

• Camber (+/- 10°)
• Toe (+/- 40°)
• Caster (+/- 20°)
• Steering

Includes
4x Measurement gauges for each suspension
1x Toe gauge

Discover unparalleled precision in RC motor analysis with the SKYRC Brushless Motor Analyzer. This state-of-the-art tool is an essential for any RC enthusiast, designed to deliver comprehensive insights into your motor's performance. Whether you're a professional racer or a hobbyist, this analyzer caters to your needs by measuring vital parameters including KV value, RPM, current draw, and motor timing with exceptional accuracy.

• Measures KV (RPM per Volt), RPM, voltage (U), and current (I) with precision, enabling you to optimize your motor's performance.
• Advanced motor timing analysis, ranging from 0 to 70 degrees, helps in fine-tuning your motor for peak efficiency.
• Noise level detection from 60dB to 120dB, assessing motor health and identifying potential issues with bearings or rotor balance.
• Phase A, B, and C Sensor Timing, showing the actual timing of sensor elements, crucial for sensored motors.
• Compact and user-friendly design with a clear 2x16 character LCD screen, providing real-time data in an easy-to-read format.

With the SKYRC Brushless Motor Analyzer, fine-tune your motor to achieve the best performance on the track or in the air. Its robust build, comprehensive features, and high accuracy make it an indispensable tool in your RC gear. Enhance your RC experience with precision, ease, and confidence!

Powerful, Robust, Simple

The BD250 is a powerful discharging device that allows the user to discharge a battery at up to 35 amps or 250 watts and also measures and compares the performance of batteries. BD250 allows for the precise measurement of battery capacity and takes the guesswork out of choosing the best battery for your application.

The BD250 is much more than a simple battery discharger or a battery load tester. It will test virtually any type or size of battery, any chemistry or number of cells, up to 35 volts.

It is small with a high performance cooling system and uses MOS fets from the well-known brand IXYS, to make sure it can discharge at 250 watts continuously.

Big Breakthrough Fan System

A single, larger fan pushes air downward through an extruded aluminum heat sink. As air passes vertically through the heat sink, it absorbs heat and carries it out. This make BD250 discharge rate at 250 watts continuous possible.

Simple and Intuitive Operation

The Rotary Dial simplifies operation. The Digital LED Display provides clear, accurate information.

It can test virtually any type, size and chemistry battery.

The BD250 is a voltage oriented discharger, virtually any type of battery can be operated. Accepted voltage ranges from 5.40V to 35.00V. Examples:

• 2S-8S LiPo, LiFe, LiHv
• 6Cell-23Cell NiMH, NiCd
• 6-32V Pb (Lead Acid)

Easy-to-Use PC Software for Data Analysis

PC software supplied with the BD250 is easy to use and intuitive. Please see SKYRC’s official website for the software download. There are two discharge modes: 1. Constant Power; 2. Constant Current. The software can automatically sense the battery cell count and recommends a minimum safe discharge voltage. Discharge tests may be viewed in Amp Hours, Watt Hours or Minutes. Results can be graphed as Voltage vs. Amp hours, Watt hours, Minutes.

Maximum Discharge Power Chart

Specifications:

Accepted Voltage Range: 5.40-35.00V
Low Voltage Alert: <5.2V
High Voltage Alert: >35V
Max. Discharge Power: 250W
Discharge Current Range: 0.01A-35.00A
Current Consumption in Sleep Mode: <100uA
Current Display Accuracy:
0.01-10.00A ±60mA
10.00-30.00A ±3%
Voltage Display Accuracy:
5.4-10V <80mV
10-20V <120mV
20-35V <160mV
Capacity Display Accuracy: ±3%
Weight: 879g
Dimension: 136 x 105 x 114 mm / 5.3 x 4.1 x 4.5 inches

Includes:

• BD250 Discharger
• XT60 Discharge Cable Adapter (install your own plug if your batteries do not use XT60 plugs)
• Replacement Fuse
• Manual

SkyRC B6neo: Charging Innovation Redefined

Experience the power of the SkyRC B6neo, a breakthrough in RC charging technology. Smaller than a credit card, this next-generation charger packs impressive features and a sleek design.

Compact Powerhouse

Despite its small size, the B6neo delivers up to 200W when powered by DC, and 80W with Type-C PD input. A remarkable upgrade from its predecessor, it offers flexibility and efficiency in charging RC batteries.

Enhanced Discharging Capabilities

The integrated balance port enables the B6neo to discharge at up to 24W, streamlining the discharging process and providing faster, more efficient service.

More Than Just a Charger

Acting as a digital power supply, the B6neo provides optimal voltage and current settings, with comprehensive protection against electrical hazards.

Quiet and User-Friendly

With its quiet operation and intuitive ColorX interface, the B6neo enhances your charging experience without noise disturbance and offers easy navigation akin to smartphones.

Firmware Upgrades

Keep your charger up-to-date effortlessly with the Charger Master App for easy firmware updates.

17mm hex adapter for checking 1/8 diffs with SKYRC Diff Checker.