The SkyRC FuriaX Supa Combo pairs the FuriaX Supa 60A brushless ESC with the FuriaX Supa 3650 sensorless brushless motor to form a matched 1/10 scale brushless system. It is aimed at drivers upgrading from brushed systems or basic RTR electronics in buggies, touring cars, short course trucks and drift chassis who want a reliable brushless combo without a complicated setup.

With KV options from around 2300kV up to 5400kV (depending on version), you can choose the combo suitable for your needs - either more torque or more speed: lower KV for heavier 1/10 trucks and off-road rigs like an Arrma Granite, higher KV for on-road and club-race builds based on platforms such as a Traxxas Slash or Losi 22. The system runs on 2-3S LiPo or 6–9 cell NiMH packs, so it drops neatly into most 1/10 RC car and truck layouts.

FuriaX Supa 60A Brushless ESC

The FuriaX Supa 60A ESC is the control side of the combo. It is rated at 60A continuous and up to 360A burst, and supports both sensored and sensorless brushless motors, though the included motor is sensorless. It is intended for 1/10 touring cars, buggies and short course trucks on 2–3S LiPo or 6–9S NiMH packs, with a compact footprint (about 48×38×38.5mm including fan) and a weight of roughly 100g so it will not upset the handling of most chassis.

Programming is done through SKYRC's RC Gears app on your phone, so you do not need a separate program box. From there you can set running mode (forward/brake, forward/brake/reverse, forward/reverse), drag brake, punch, maximum forward and reverse power, throttle neutral range, LiPo cutoff voltage, BEC output (6.0V or 7.4V), thermal cutoff level and motor pole setting. Cooling is handled by the integrated heatsink and fan, with airflow being the main requirement during installation.

• Current rating: 60A continuous / 360A burst
• Battery support: 2–3S LiPo or 6–9 cell NiMH
• Motor support: sensored or sensorless brushless motors for 1/10 applications
• Built-in BEC: selectable 6.0V or 7.4V for receivers and servos
• Configurable running mode, punch, drag brake, brake strength and reverse strength
• Adjustable LiPo cutoff, thermal protection and motor pole count
• Protection functions for low voltage, overheating and motor lock/stall conditions
• Approx. size and weight: 48×38×38.5mm with fan, about 100g

FuriaX Supa 3650 Brushless Motor

The FuriaX Supa 3650 is a 36×50mm 4-pole, 12-slot sensorless brushless motor built for 1/10 scale vehicles. Compared to a typical 2-pole 540-size motor, the 4-pole design produces more torque and smoother power delivery, which helps with controlled launches, steadier climbs and better throttle resolution on both dirt and pavement. Depending on the KV version, it is suitable for mixed-use buggies and trucks on 2S, or for higher-speed on-road setups on 2–3S.

Internally, the motor uses 0.2mm stator laminations, a 6061-T6 aluminum can, high-purity copper windings rated for high temperatures and sintered neodymium magnets rated to around 200°C. Pre-soldered 4.0mm gold-plated bullet connectors and color-coded ABC phase wires simplify wiring. The rotor is removable, which makes cleaning, bearing checks and any performance tuning more straightforward. It is designed to cope with dust and splashes encountered in normal off-road and car-park running, rather than being a fragile race-only part.

• Size: approx. 36mm diameter × 50mm length (3650 format)
• Design: 4-pole, 12-slot brushless sensorless
• KV options: commonly 2300kV, 3100kV, 3600kV, 4000kV and 5400kV, depending on the specific combo
• Battery rating (motor): up to 1–3S LiPo; the combo as a whole is used on 2–3S LiPo as limited by the ESC
• Construction: 0.2mm stator laminations, 6061-T6 can, high-temp copper windings and neodymium magnets
• Connectors: factory-installed 4.0mm gold bullets with ABC phase wiring
• Maintenance: removable rotor for easier cleaning and service
• Approximate weight: around 150g depending on KV version

Typical applications and compatibility

This combo is aimed at 1/10 hobby-grade RC cars where a driver wants a sensible brushless upgrade or replacement system. Typical use includes 2WD and 4WD buggies, touring cars, drift builds and short course trucks. It is a good fit for brushless conversions or electronics upgrades in vehicles like:

• Traxxas Slash, Rustler, Bandit, Stampede and similar 1/10 platforms
• Arrma Granite and other 2–3S 1/10 trucks when set up with appropriate gearing
• Tamiya TT-02 and similar touring chassis as a brushless conversion from the stock 540 motor
• Losi and Team Associated 1/10 buggies or short course trucks used for club racing or track days

If you are searching for an affordable 1/10 brushless combo, a 60A ESC and 3650 motor system for a brushless conversion, or a straightforward ESC + motor upgrade for a Traxxas, Arrma, Tamiya or similar 1/10 RC car, the FuriaX Supa Combo offers a practical option. It combines app-configurable ESC settings, sensible protections and a modern 4-pole motor in a package that installs easily and delivers predictable power from the first run.

SkyRC B6neo2: Charging Innovation Redefined

Experience the power of the SkyRC B6neo2, a breakthrough in RC charging technology. Smaller than a credit card, this next-generation charger packs impressive features and a sleek design.

Compact Powerhouse

Despite its small size, the B6neo2 delivers up to 300W when powered by DC, and 80W with Type-C PD input. A remarkable upgrade from its predecessor, it offers flexibility and efficiency in charging RC batteries.

Enhanced Discharging Capabilities

The integrated balance port enables the B6neo2 to discharge at up to 24W, streamlining the discharging process and providing faster, more efficient service.

More Than Just a Charger

Acting as a digital power supply, the B6neo2 provides optimal voltage and current settings, with comprehensive protection against electrical hazards.

Quiet and User-Friendly

With its quiet operation and intuitive ColorX interface, the B6neo2 enhances your charging experience without noise disturbance and offers easy navigation akin to smartphones.

Firmware Upgrades

Keep your charger up-to-date effortlessly with the Charger Master App for easy firmware updates.

If you keep a mix of AA/AAA packs for remotes and lights, plus 18650/21700 cells for flashlights or tools, the MC5000 lets you manage all of them from one bench-friendly unit. Four fully independent slots handle over ten chemistries (Li-ion, Li-ion HV, LiFe, NiMH, NiCd, eneloop, NiZn, RAM, LTO, and even emerging Na-ion), with precise control over charge/discharge and full readouts for capacity and internal resistance.

Why choose it

• One charger for almost everything: Works with 44+ cylindrical sizes - from AAAA and AAA/AA up to 21700/32700; up to two D-cells at a time. Spring-loaded rails make swaps quick.
• Real analysis, not just “charging”: See live voltage/current curves, mAh put back, and internal resistance to judge cell health and match sets.
• Fast, controlled charging: Up to 5.00A per slot (80W total). Discharge up to 2.00A for testing, cycling, and storage prep.
• Six useful modes: Charge, Discharge, Storage, Cycle, Refresh, and Break-in - available per chemistry.
• App control & updates: Built-in Bluetooth works with SkyRC’s SkyCharger app for remote monitoring and firmware upgrades.
• Extra utility on the bench: USB-C PD 65W output to power a laptop, tablet, or test gear while you work. (PD output takes priority over charge power.)
• Clear, quick operation: 2.8" color display, scroll wheel + two buttons, status LEDs, and triple-fan cooling.

Common questions:

What can I charge?
Single cylindrical cells from AAAA/AAA/AA, Sub-C, C, and D (two at a time), plus lithium sizes like 18350/18500/18650/18700/20700/21700/26650/32650/32700 and many in between. Protected 21700 cells fit.

How fast is it, really?
Set 0.05-5.00A per slot, subject to the 80W total. That’s enough to quick-charge high-capacity Li-ion or run proper “break-in” on NiMH at gentle rates. Discharge is 0.05-2.00A per slot for capacity checks or storage conditioning.

Does it run on AC or USB-C?
It has a built-in 100-240V AC power supply. The USB-C port is output only (PD 3.0 up to 65W). If you power a device from PD, the MC5000 prioritizes that power before sharing the remainder to the charge slots.

Is there an app?
Yes - SkyCharger for iOS and Android. Connect via Bluetooth to watch curves, log data, and perform firmware updates.

Can it prepare cells for storage or revive older NiMH?
Yes. Storage, Refresh, Cycle, and Break-in modes are built in, with chemistry-appropriate termination methods for NiMH/NiCd.

What’s in the box

MC5000 charger, AC power cord, quick-start guide.

Notes & safe use

• Do not charge primary (non-rechargeable) cells such as alkaline, zinc-carbon, CR123A/CR2.
• Follow your battery maker’s recommended charge rates; the MC5000 lets you set conservative currents for longevity.

Tired of that sinking feeling when you can't find your keys, wallet, or even your furry friend? Meet the SkyRC LocusTag – a smart, no-fuss Bluetooth tracker that hooks right into Apple's Find My network. It's like having a personal guardian for your essentials, using the massive web of Apple devices out there to ping locations in real time, all without any pesky subscriptions. If you're hunting for a reliable AirTag alternative that's easy on the wallet and tough enough for real life, this is it. Compact, clever, and certified for seamless Apple integration, the LocusTag turns "lost" into "found" faster than you can say "where'd I put that?"

Why You'll Love the SkyRC LocusTag

• Effortless Apple Find My Sync: Just pair it with your iPhone, iPad, or Mac, and you're set. Get instant alerts, share locations with family, and track down items using the app you already know and love – no extra downloads or fees.
• Handy Buzzer to the Rescue: Misplaced something close by? Hit play on the sound, and it'll chirp loud enough to hear through couch cushions or a messy bag. No more flipping the house upside down.
• Battery That Goes the Distance: The included CR2032 lasts over a year, and swapping it out is a breeze. Forget about constant charging; this tracker's ready when you are.
• Built Tough for Daily Adventures: At just 10 grams, it's lightweight but rugged, handling temps from -20°C to 60°C. Clip it to your backpack, bike, or pet collar – it'll keep up with your busiest days.
• Smart Alerts Keep You One Step Ahead: The built-in accelerometer senses motion and sends notifications if you wander off without your stuff. It's like an extra set of eyes on your valuables.
• Apple-Approved Reliability: MFi certified means it plays perfectly with iOS, so you get smooth, dependable performance every time.

Set It Up in Seconds

Pop out the battery tab, fire up the Find My app, and connect – that's all it takes. If you need to reset or change the battery later, a quick button press does the trick. It's straightforward, even if tech isn't your thing.

Works With What You Have

Designed for Apple's world:

• iPhone or iPod touch on iOS 14.5 or newer
• iPad running iPadOS 14.5 or later
• Mac with macOS 11.1 or above

What's Inside the Box

• One SkyRC LocusTag tracker
• Pre-installed CR2032 battery
• A handy lanyard to attach it right away

Life's too short to waste on searching for lost items. The SkyRC LocusTag gives you back that time, with smart tracking that's affordable, durable, and dead simple to use. Grab yours now and step into a world where everything stays found – you won't regret it!

SKYRC Thermologger Duo is a temperature data logger designed for RC enthusiasts who need accurate monitoring of motors, batteries, and electronic speed controllers. It features dual external temperature sensors, enabling real-time measurement of two separate points in your setup. A built-in Bluetooth module connects to the SKYRC mobile app (available for iOS and Android), allowing users to observe live readings, record data, and analyze temperature trends over time.

This device helps identify potential overheating issues, optimize battery health, and improve overall RC performance by providing a clear view of how components heat up under load. With adjustable sampling rates and an onboard memory, it offers flexibility in how frequently data is captured and stored. The compact design allows for easy placement within a variety of remote control models, including cars, boats, and aircraft.

Key Specifications and Features:

• Dual External Sensors: Measures temperatures at two separate points, such as a motor and a battery pack, or an ESC and ambient conditions.
• Bluetooth Connectivity: Pairs with the SkyRC Thermologger app, allowing users to view live data, configure settings, and retrieve logged information.
• Data Logging and Analysis: Records temperature readings for later review, assisting in problem diagnosis and performance tuning.
• Compact Form Factor: Designed for minimal space usage in RC vehicles, with mounting options that accommodate various chassis layouts.
• User-Configurable Sampling: Offers adjustable intervals for temperature recording, enabling detailed tracking or extended run times.
• App-Based Interface: All controls, graphs, and temperature logs are accessed through the mobile application. There is no onboard display, keeping the device lightweight and streamlined.

A must-have for RC hobbyists to track the temperatures.

Now you can take temperature measurement at a safe distance with SkyRC ITP380. RC hobbyists will never get burned or air blowing in your face from the RC vehicles, engines, motors, chargers, etc., while taking measurements.

You can trust SkyRC ITP380 to get accurate temperature readings from a safe distance, wherever indoor or outdoor.

SkyRC has engineered the ITP380 temperature measuring with accuracy down to the 0.1 °F and the object temperatures ranging from -40°F (-40°C) to 716°F (380°C).

SKYRC part number SK-500037

Save your battery charging preferences effortlessly using these NFC tags.

Simply tap them on compatible SkyRC chargers to instantly recall your stored settings, eliminating the need to manually reconfigure parameters each time. 

The tags feature a blank white area that you can label for easy identification.

The Cheetah 1/10th 60A Sensored Combo set is ready to run out of box, combining the Cheetah 60A Sensored ESC, Cheetah Sensored Motor and Program Card.

This combo is perfect for 1/10th scale cars and trucks. With the included program card, you can modify settings settings such as cut-off voltage, brake and punch strength, drag brake and other parameters that add up to an incredible RC driving experience. You simply won't find a better power package for a more attractive price!

Not recommended for 4WD vehicles, and 3S should only be run on lightweight vehicles with 2590KV (13.5T) and lower KV.

ESC Specifications:

• Model: CS60
  
• Constant/Burst Current: 60A/380A
  
• Recommended Car: 1/10 and 1/12 Buggy and Touring Car, 1/10 and 1/8 Crawler
  
• Motor Limits: 2S LiPo: ≥8.5T(1/10 Touring), ≥10.5T(1/10 Buggy);  3S LiPo ≥10.5T(1/10 Touring), ≥13.5T(1/10 Buggy)
  
• Resistance: 0.0007 ohm
  
• Cell Count: 2-3S LiPo or 4-9S NiMH
  
• BEC Output: 6V@3A
  
• Size: 39x38x20mm (LxWxH)
  
• Weight: 30g (without wires)
  
• Fan: Included/5V@0.2A, Max 12.6V
  
• Connectors: Motor leads have bullet connectors pre-soldered for plug-and-play connection to ESC (must solder battery connector of choice)

A complete, powerful brushless combo for a wide variety of 1/10 applications.

Includes a Leopard 60A V2 brushless ESC, a Leopard brushless motor and program card for less than what the other guys charge for an ESC, you can't beat this deal!

17mm hex adapter for balancing 1/8 scale buggy tires with SKYRC Tire Balancer.

Cold nitro starts are where starter boxes go to question their life choices. The SKYRC Engine Heater pre-warms .19-.26 RC nitro engines so the piston, sleeve, con-rod and crank are treated a bit less rudely during warm-up.

Powered from a 12V DC source, this compact 90W nitro engine preheater brings the engine up to approximately 60-70C in around 10 minutes, depending on ambient temperature. MCU-controlled heating, a built-in temperature sensor, low voltage cutoff and an automatic safety timer keep the process simple instead of turning pit prep into a small electrical opera.

The adjustable fireproof and heat-resistant cover fits over the engine head, while the top access port lets you check engine temperature without constantly removing the heater. It is especially useful for break-in and cold-day starts on compatible RC nitro cars, buggies, trucks and truggies using .19-.26 engines. Power source required.

SKYRC Part Number: SK-600066.

Racers buy an ESC because they want the car to respond the way they intend, not the way some mystery box in the chassis happens to feel that day. The SKYRC Toro TS160-PRO V2 gives you a serious tuning platform for 1/10 setups, with control over the things drivers actually adjust - throttle response, brake force, punch, and timing behavior. Run it mild and legal for the class, or open up the tuning where the rules allow it. Either way, the point is control.

TS160-PRO V2 is rated at 160A continuous and 850A peak, supports sensored and sensorless brushless motors, and runs on 2-3S LiPo or 6-9S NiMH. It is intended for 1/10 touring cars, 1/10 buggies, and 1/10 crawlers, with motor recommendations of 4.5T and up for touring and 5.5T and up for buggy. For normal 1/8 buggy or truggy use, this is not the ESC to pretend is "probably fine" unless you enjoy troubleshooting smoke.

V2 also brings practical pit-table updates. Programming is handled through the RC Gears app when used with the optional SKYRC Bluetooth dongle, and the V2 update adds a Type-C Bluetooth interface plus an external push-button switch. The built-in BEC is rated up to 15A and can be set to 6.0V or 7.4V, giving modern standard and HV servos the power they need without adding more clutter to the car.

The aluminum case and cooling fan help manage heat under load, while built-in protections cover overvoltage, low voltage, motor stall, and over temperature conditions. Size is 39x38x19mm, weight is 97g, and yes, it has Boost/Turbo timing adjustment - useful where allowed, and something to keep set correctly where the rulebook says "no funny business."

High-Performance Battery Discharging: The SkyRC BD380+ is a standalone high-performance battery discharger and analyzer designed for RC enthusiasts and professionals. With an impressive discharge power of up to 380 watts, this device facilitates rapid and efficient battery discharging, catering to a wide array of battery types and sizes. Its robust power capability makes it an essential tool for maintaining optimal battery health in demanding RC applications.

Advanced PC Software Integration: The BD380+ includes intuitive PC software that allows users to monitor battery performance in real-time. This software provides detailed discharge curves, enabling users to compare battery performance and export data for further analysis. This feature is particularly beneficial for those who require precise battery management and performance tracking.

Versatile Compatibility: This device is compatible with various battery chemistries, including LiPo, LiFe, LiIon, NiMH, and NiCd, and can handle different cell counts. This versatility makes it a valuable tool for RC hobbyists who use a variety of battery types in their equipment.

Flexible Discharge Modes: The BD380+ supports both constant power and constant current discharge modes, offering users flexibility in how they test and discharge their batteries. This ensures precise control over the discharging process, which is crucial for accurate battery performance evaluation.

Real-Time Data Display: The BD380+ features a display that shows real-time battery voltage, discharged capacity, and discharge current. This immediate feedback allows users to make informed decisions about their batteries' health and performance, enhancing the overall user experience.

Comprehensive Safety Features: Safety is paramount in battery discharging, and the BD380 includes multiple safety features such as over-temperature protection, over-current protection, and reverse polarity protection. These features ensure the safe operation of the device and protect both the device and the batteries being tested.

User-Friendly Design: Despite its advanced capabilities, the BD380+ is designed with a user-friendly interface, making it accessible and easy to operate. The clear display and intuitive controls contribute to a seamless user experience, allowing even less experienced users to operate the device effectively.

Compact and Durable Construction: The BD380+ combines powerful performance with a compact and robust design. This makes it easy to transport and durable enough for regular use, ensuring it can withstand the demands of frequent discharging sessions.

Efficient Cooling System: To prevent overheating during high-power discharges, the BD380 is equipped with an efficient cooling system. This ensures reliable operation and maintains optimal performance even during intensive use.

Battery Health Benchmarking: One of the standout features of the BD380+ is its ability to benchmark battery health by comparing discharge curves and identifying defective batteries. This feature is crucial for maintaining peak performance of RC equipment by ensuring only the best batteries are used.

This new Dongle is compatible both with SKYRC Chargers and the new SKYRC TS-160 PRO ESC.

Bluetooth 5.0. Compared to previous BLE 4.2, BLE 5.0 significantly increases the range, speed, and broadcast messaging capacity of Bluetooth applications, bringing more peace of mind to users. Paired and ready instantly

Thanks to BLE’s emphasis on wake and sleep modes, the plugged dongle that isn’t in use can remain in sleep mode indefinitely; it can also wake from that sleep mode in an instant, paired and ready to communicate with a smartphone.

SKYRC Part Number SK-600135-02

SKYRC Tire Warmer Bands elevate your RC racing experience by pre-heating tires to the ideal temperature, ensuring optimal grip and performance from the start. These bands are designed to fit a wide range of tire sizes, suitable for both 1/10 and 1/8 scale RC cars. By maintaining a consistent temperature, these bands help in achieving a uniform tire performance, crucial for competitive racing.

Simple and efficient, these warmer bands plug directly into the SKYRC tire warmer controller, offering an easy-to-use solution for racers. They can be powered by a 12V DC source or a 3S LiPo battery, providing flexibility for use in various setups. This adaptability ensures that racers can maintain optimal tire conditions, regardless of the power sources available at different racing venues.

Compared to alternatives, SKYRC Tire Warmer Bands stand out for their ease of use and wide compatibility. Unlike some other warmers that may require specific setups or additional equipment, these bands offer a plug-and-play solution that caters to a broad range of tire sizes and types. This universal applicability makes them a preferred choice for many racers looking for a hassle-free tire warming solution.

Impact on performance is significant, as pre-heated tires provide better traction, quicker lap times, and a more predictable handling experience. Racers using SKYRC Tire Warmer Bands can expect their vehicles to perform at their best right from the start, without the need for tires to gradually warm up during the race. This can be the difference between leading the pack and playing catch-up.