HobbyStar 4pc. Electric Screwdriver Hex Driver Set with standard 1/4" drive end for use in Hobbystar Power Screwdriver and common electric screwdrivers. TiNi coated.

• Tip set includes sizes: 1.5mm  2.0mm  2.5mm 3.0mm

HobbyStar crimping pliers are incredibly heavy-duty and make quick work of crimping a variety of leads on 18-28AWG wire. They work well on connectors such as servo leads, balance leads, Molex type etc. There are a lot of cheap crimping pliers on the market that make this a frustrating task, HobbyStar pliers are the best you'll find at an incredible price!

Features:

• 4 different size crimping areas
• Ratcheting design allows you to lock in terminal first, and then insert wire
• Heavy-duty design for years of dependable use
  
• Large grips provide comfort

The HobbyStar 6-in-1 driver is a compact, easy way to carry the most commonly used drivers in the same space as one tool handle.  The lightweight handle features ribbing for positive grip, and all tips store inside and are held in place with a divider to keep the tips from rattling around in the handle.  An aluminum end-plug keeps them all secure, and a magnetic base inside the handle secures each tip while in use.  High-precision tips feature hardened surfaces for a secure fit that won't round out fasteners, and are coated with a brown finish that not only looks great but protects against corrosion.

Includes #0 phillips and #1 standard screwdriver tips, and 1.5, 2.0, 2.5 and 3.0mm hex drivers. Handle length is 105mm and assembled length is 155mm.

Wire mesh cleaner for keeping soldering iron tip clean.

A powerhouse of a soldering iron, the Green 060 packs 60W of power in a handheld unit and even includes a dial to adjust temperature from 200-400C (392-842F).

It even comes with a high-grade ceramic heating element and an internal LED light which indicates when it is plugged in.  Uses standard 900 series tips that all Green soldering irons and stations use.

A compact set of sturdy wire cutters to easily fit into any toolbox.  Feature spring-assisted opening for easy operation.

A handy tool for holding the flat end of ball joints and rod ends when installing onto turnbuckles.  For M3/M4 joints, one side opening measures 9mmx5mm and the other 10mmx4mm.  Machined, anodized aluminum. 

The HobbyStar Shock Plier is an ingenious multi-tool that is much more than just a shock plier.  The ingenious design incorporates shock plier function with the capability to hold shock bodies, measure screw and shock-shaft length, press ball-ends on and off of cups and even function as a solder-jig and wrench.

Features:

• Beautifully CNC-machines and anodized in a durable black finish
• Cutouts for 3.0, 3.5 and 4.0mm shafts
• Multiple locations for shock bodies
• Cutouts for holding Dean's (T-plug) and XT60 plugs
• Holes from 2.0 to 7.8mm for holding a wide variety of bullet terminals during soldering
• 4.0 and 5.0mm openings on plier end to function as a wrench (great for turnbuckles)
• Press for installing and removing ball cups
• 2 different areas for measuring fastener and shock shaft length

The Green 937 Digital Soldering Station comes with a digital temperature control unit and a heavy-duty soldering iron with a ceramic heating element.  The digital control provides precise heat control from 200 to 400C and features an easy-to-read LED display.  Simple push-button controls allow you to adjust heat in 1 degree increments and the security key locks in the selected temperature, preventing accidental changes.  

Features:

• Digital LED displays the selected temperature, heating status, and operational alerts
• Simple push-button controls adjust heat in 1° increments
• Security key locks the selected temperature, preventing accidental changes
• Temperature control unit holds the selected temperature within 1 degree when idle

Specifications:

• Temperature: 200-480C (392-896F)
• Power Input: 110V
• Power Consumption: 60W
• Heating Element: Ceramic
• Cable Length: Soldering Iron Cable: 107cm (42"), AC Power Cable: 160cm (66")
• Dimensions: 12x9.3x7cm (4.7x3.7x2.8")
• Weight: 1.3kg (2.9lb)
• Includes: Solder station with handle, stand with sponge and fine-point tip

Green 907 solder handle is a direct replacement for 937 solder stations.  Ceramic heating element for superior performance and long life.

HobbyStar Double Sided Tape is a 10 foot long roll of the 1" wide double side tape that has become a must-have for RC use. This tape is 1mil thick and is perfect for securing receivers, ESC's or transponders to your RC car. The adhesive on the tape will keep your device securely fastened where you want it, and the waterproof, heat resistant properties help it stand up to the elements, and the soft, flexible material will conform to curved or uneven surfaces, and helps to reduce vibration to the component.

Features:

• Perfect for cars, trucks, boats, helicopters, drones, rock crawlers and more!
• Strong adhesion and durability
• Waterproof and heat resistant
• Reduces vibration
• Soft and flexible
• Suitable for curved surfaces
• Strong tensile strength

A must-have for RC hobbyists to track the temperatures.

Now you can take temperature measurement at a safe distance with SkyRC ITP380. RC hobbyists will never get burned or air blowing in your face from the RC vehicles, engines, motors, chargers, etc., while taking measurements.

You can trust SkyRC ITP380 to get accurate temperature readings from a safe distance, wherever indoor or outdoor.

SkyRC has engineered the ITP380 temperature measuring with accuracy down to the 0.1 °F and the object temperatures ranging from -40°F (-40°C) to 716°F (380°C).

SKYRC part number SK-500037