Search results
Search results
Big RC chargers are hungry little boxes. Feed them with a random bench supply or a tired old brick and you get voltage sag, current limits, heat, and the delightful suspense of wondering which part of your charging setup will complain first. The SKYRC eFUEL PSU2000 is built for serious RC charging benches that need clean adjustable DC power without turning the pit table into a science-fair accident.
Output adjusts from 8-36V and 1-55A. On 100-120V AC input it provides up to 1200W. On 200-240V AC input it can provide up to 1980W. For US wall outlets, treat it as a very capable 1200W supply; the full 1980W rating depends on higher-voltage AC input.
A front LCD shows real-time voltage and current, while the smart cooling fan and built-in protections help keep the unit steady under load. It is a proper bench and track power source for high-output chargers, with enough control to set the voltage and current for your setup instead of just hoping the charger and supply decide to get along.
SKYRC Part Number: SK-200029.
Quick specs:
- Product type: Adjustable AC/DC switching power supply for RC chargers
- Input voltage: AC100V-AC240V
- DC nominal output power: 1200W +/-10% on AC110V; 1980W +/-10% on AC220V
- Output voltage range: 8.0V-36.0V, default 12V
- Output current range: 1.0A-55.0A, default 30A
- Voltage accuracy: +/-1%
- Current accuracy: +/-1%
- Conversion efficiency: greater than 85% at AC230V
- Output connector: XT90 output port
- Display: LCD voltage and current readout
- Protections: over-current, over-temperature, short-circuit, overload
- Dimensions: 289x90x158mm
- Weight: approx. 2.9kg
- Included: eFUEL PSU2000 power supply, AC power cord, SKYRC XT90-XT90 charge lead, instruction manual
The SKYRC Toro TS120 Competition ESC features a new anodized aluminum case and a low internal resistance of <0.0003 ohm. Smooth and precise throttle response combined with braking performance ideal for 1/10th scale competition. With 10 user defined power profiles available and Advance Timing System (ATS) for "Boost" and "Turbo" profiles both provide unique power curves suited for running in non-spec stock or modified classes.
Blinky mode (zero timing) profile is available for organized spec class racing.
New aluminum casing improves cooling efficiency while providing a works appearance. The TS120 features an onboard switch design. No more external wired switches means racers no longer need to worry about switch placement and finding room on today’s high performance racing chassis’.
Available program box is available for adjusting the ESC without the need for a computer or laptop at the track allowing racers to change ESC profiles, adjust ESC settings, test PPM signal between transmitter and receiver, verify servo performance, motor KV / RPM performance and LiPo battery monitor functions on the LCD screen through the on-board RX plug, motor sensor, LiPo balancer, and USB ports (program box sold separately).
Can also be programmed via SkyLink and WiFi Module.
NOTE: This ESC is designed for use in 1/10 2WD buggies, 2WD SCT's, 2WD stadium trucks and 1/10 4WD buggies with 540 2-pole motors. NOT FOR USE IN 4WD SHORT COURSE TRUCKS. NOT FOR USE WITH 4-POLE MOTORS, AND ALTHOUGH SPECS LIST 3S COMPATABILITY, MOTOR TURN LIMITS MUST BE ADHERED TO WHEN RUNNING 3S OR ESC DAMAGE MAY RESULT. 3S USE IS NOT RECOMMENDED WITH THIS CATEGORY OF ESC.
The Cheetah 1/10th 60A Sensored Combo set is ready to run out of box, combining the Cheetah 60A Sensored ESC, Cheetah Sensored Motor and Program Card.
This combo is perfect for 1/10th scale cars and trucks. With the included program card, you can modify settings settings such as cut-off voltage, brake and punch strength, drag brake and other parameters that add up to an incredible RC driving experience. You simply won't find a better power package for a more attractive price!
Not recommended for 4WD vehicles, and 3S should only be run on lightweight vehicles with 2590KV (13.5T) and lower KV.
ESC Specifications:
- Model: CS60
- Constant/Burst Current: 60A/380A
- Recommended Car: 1/10 and 1/12 Buggy and Touring Car, 1/10 and 1/8 Crawler
- Motor Limits: 2S LiPo: ≥8.5T(1/10 Touring), ≥10.5T(1/10 Buggy); 3S LiPo ≥10.5T(1/10 Touring), ≥13.5T(1/10 Buggy)
- Resistance: 0.0007 ohm
- Cell Count: 2-3S LiPo or 4-9S NiMH
- BEC Output: 6V@3A
- Size: 39x38x20mm (LxWxH)
- Weight: 30g (without wires)
- Fan: Included/5V@0.2A, Max 12.6V
- Connectors: Motor leads have bullet connectors pre-soldered for plug-and-play connection to ESC (must solder battery connector of choice)
RC cars have a special talent for collecting dust, sand, grass, and suspicious bits of track debris in places that seem specifically designed to be annoying. The SKYRC RC AirDuster is the tidy answer to that problem - a cordless blower built for proper RC cleanup, quick drying after wet runs, and cooling motors and ESCs between heats without dragging out a compressor or wasting canned air.
It is powerful in a very practical way. The brushless motor spins up to 80,000 RPM, the trigger is stepless, and you get 6 speed levels plus cruise mode, which means you can go from "gentle around electronics" to "remove half the parking lot from the chassis" without much drama. It feels more like a tool and less like one of those gadgets that looked clever online and then spent the rest of its life in a drawer.
The rest of it is equally sensible. Dual 21700 Li-ion cells give it 8000mAh total capacity, USB-C charging keeps life simple, and the compact 145x120x45mm body weighs about 340g, so it is easy to toss in a pit box and forget about until the moment you are very glad you brought it. Which is, in fairness, exactly what good tools are supposed to do.
SKYRC B6AC V2 is the upgraded version for well-known iMAX B6AC. Compared with iMAX B6AC, it is more accurate and stable and also has some new features and functions. Users could set the terminal voltage by themselves and connect it to PC for PC control and firmware upgrade. What's more, users could also use it as Lithium Battery Meter and Battery Internal Resistance Meter. There are Automatic Charging Current Limit, Capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safer than V1.
SKYRC B6AC V2 is a high-performance, micro processor control charge/discharge station with battery management suitable for use with all current battery types, with integral equalizer for six-cell Lithium- Polymer (LiPo), Lithium High Voltage,Lithium iron phosphate(LiFe) and Lithium-Ion (LiIon) batteries; maximum 6A charge current and maximum 50W charge power.
Features:
- Dual Power AC/DC Input
- Temperature Probe Socket. If the temperature limit is reached, the process will be terminated.
- 2-6S XH Plug-in Balance Sockets
- The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35 V.
- Depending on different kinds of batteries, there are different charging modes to meet users' request.
- PC Control: The user can monitor pack voltage, cell voltage and other data during the charging, view charge data in realtime graphs, and can also control the charger from "ChargeMaster".
- Program Data Store / load
- Battery Resistance Meter
- Battery Voltage Meter
- Maximum Safety
- Terminal Voltage Control
What’s in the Box:
- iMAX B6AC V2
- AC Power Cord
- DC Cable with Alligator Clip Charging Connector
- T Plug with Banana connector Charging Cable
- T Plug with Alligator Clip Connector Charging Cable
- T Plug with XT60 connector Charging Cable
- T Plug with Futaba connector Charging Cable
- T Plug with JST connector Charging Cable
- Instruction Manual
