HobbyStar V2 motors and ESC's now include built-in temperature monitoring and thermal protection to protect your valuable electronics.  When paired with a compatible HobbyStar ESC, the user can set up the system to either reduce or completely cut off power if either the motor, or ESC temperature exceeds the programmed limit. Motors can be run without temperature port connected when paired with ESC's that do not offer temperature monitoring. 

3665 4-pole motor provides tremendous torque and comes with pre-installed 4.0mm bullet connectors. 

Features:

• 4-pole motor with 12-slot high-torque design
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.35mm) stator laminations 

HobbyStar 3670 4-pole brushless motor provides tremendous torque and sustained high-RPM power. 70mm can with recessed fins is also a great fit in boat and EDF applications. Versatile waterproof design allows you to drive in extreme conditions and motor leads come with pre-installed 4.0mm gold-plated bullet plugs for easy, no-soldering connection.

Features:

• 4-pole motor with 12-slot high-torque design
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.2mm) stator laminations 

Voltage recommendations in the table below are guidelines for the voltage you can safely run.  It is still critical that the user monitor motor temps and adjust gearing if necessary, any motor can overheat to the point of destruction if over-geared even when running at or below the rated voltage. 

HobbyStar boat motors are engineered to provide maximum power and cooling for your RC watercraft. Open endbells radiate heat away from the motor, and cooling jackets are available separately for all motors.  Motor leads come with pre-installed 4.0mm gold-plated bullet plugs for easy, no-soldering connection and a wide variety of KV's ensure a dialed setup for your application. 

Features:

• 4-pole motor with 12-slot high-torque design
• CNC Machined 6061 T6 Billet Aluminum Can
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.2mm) stator laminations 

HobbyStar V2 motors and ESC's now include built-in temperature monitoring and thermal protection to protect your valuable electronics.  When paired with a compatible HobbyStar ESC, the user can set up the system to either reduce or completely cut off power if either the motor, or ESC temperature exceeds the programmed limit. Motors can be run without temperature port connected when paired with ESC's that do not offer temperature monitoring. 

3670 4-pole motor provides tremendous torque and comes with pre-installed 4.0mm bullet connectors. 

Features:

• 4-pole motor with 12-slot high-torque design
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.35mm) stator laminations 

HobbyStar V2 motors and ESC's now include built-in temperature monitoring and thermal protection to protect your valuable electronics.  When paired with a compatible HobbyStar ESC, the user can set up the system to either reduce or completely cut off power if either the motor, or ESC temperature exceeds the programmed limit. Motors can be run without temperature port connected when paired with ESC's that do not offer temperature monitoring. 

3674 4-pole motor provides tremendous torque and comes with pre-installed 4.0mm bullet connectors. 

Features:

• 4-pole motor with 12-slot high-torque design
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.35mm) stator laminations 

HobbyStar 3674 4-pole brushless motor features a 74mm length can which provides incredible torque, and versatile waterproof design allows use in a variety of applications. motor leads come with pre-installed 4.0mm gold-plated bullet plugs for easy, no-soldering connection.

Features:

• 4-pole motor with 12-slot high-torque design
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.35mm) stator laminations 

HobbyStar LiPo packs combine quality components and powerful cells to deliver a superior-power battery for your RC vehicle. Built using the latest technology in cell chemistry to provide generous capacities, powerful discharge ratings and fast charge rates.  HobbyStar LiPo batteries are an unbeatable value!

Specifications:

• Capacity: 3700mAh
• Voltage: 11.1V (3S)
• Discharge Rating: 100C 
• Charge Rate: 2C
• Wire: 12AWG
• Plug Style: XT60
• Balance Plug: JST-XH
• Dimensions: 90x44x25mm
• Weight: 225g 

A scaled-down version of the the race-proven 540 race motors, the HobbyStar 380 V2 motors bring championship-winning design to a smaller package for your small scale rig.

High-quality Japanese aluminum is used for the cases and Japanese NSK bearings keep things spinning with as little resistance as possible.  Gold plated solder tabs and an included sensor cable round off this ideal small-scale motor.

A scaled-down version of the the race-proven 540 race motors, the HobbyStar 390 V2 motors bring championship-winning design to a smaller package for your small scale rig.

High-quality Japanese aluminum is used for the cases and Japanese NSK bearings keep things spinning with as little resistance as possible.

Gold plated solder tabs and an included sensor cable round off this ideal small-scale motor.

HobbyStar external BECs are specifically designed for demanding applications and therefore have the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns. Simple to install and easily adjustable, HobbyStar BEC's provide peace of mind.

• Output: 5V/3A or 6V/3A  (changeable with jumper)
• Input Voltage: 6V-25V (2-6s LiPo; 5-18 cell Ni-XX)
• Output Current: 3A Continuous, 8A Burst
• Weight: 7g
• Dimensions: 30 x 9 x 6mm

A powerhouse motor for your 1/8 scale buggy, the HobbyStar 4068 brushless, sensorless motor is the ideal powerplant for to supply your 1/8 scale vehicle with tire-shredding power.  4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 68mm length make this the ultimate motor for your 1/8 buggy.

Features:

• Brushless, sensorless 4-pole motor
• 12-slot high-torque stator
• CNC machined 6061 T6 billet aluminum heatsink can
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
• Precision balanced rotor for smooth operation, reliability and maximum RPM
• Stator-Super Thin (0.2mm) laminations
• Removable/replaceable rotor
• Precision engineered for maximum energy conversion

With a waterproof design featuring recessed cooling fins for added clearance, the HobbyStar 4068 4-pole motor is a potent powerhouse for 1/8 buggies.   Features the same 4-pole design and a 12-slot stator from the standard 4068 motor in a lighter-weight can.  Pre-soldered 4.0mm bullet terminals to make installation a snap.

Features:

• Brushless, sensorless 4-pole motor
• Waterproof design
• 12-slot high-torque stator
• CNC machined 6061 T6 billet aluminum heatsink can
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Multiple mounting holes with M3 and M4 threads
• Precision balanced rotor for smooth operation, reliability and maximum RPM
• Stator-Super Thin (0.2mm) laminations
• Precision engineered for maximum energy conversion

Voltage recommendations in the table below are guidelines for the voltage you can safely run.  It is still critical that the user monitor motor temps and adjust gearing if necessary, any motor can overheat to the point of destruction if over-geared even when running at or below the rated voltage. 

HobbyStar boat motors are engineered to provide maximum power and cooling for your RC watercraft. Open endbells radiate heat away from the motor, and cooling jackets are available separately for all motors.  Motor leads come with pre-installed 4.0mm gold-plated bullet plugs for easy, no-soldering connection and a wide variety of KV's ensure a dialed setup for your application. 

Features:

• 4-pole motor with 12-slot high-torque design
• CNC Machined 6061 T6 Billet Aluminum Can
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.2mm) stator laminations 

With the power to throw your truck around like a toy, the HobbyStar 4076 brushless, sensorless motor is the ideal powerplant for to supply your 1/8 scale vehicle with tire-shredding power.  4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 76mm length make this the ultimate motor for your monster truck or truggy.

Features:

• Brushless, sensorless 4-pole motor
• 12-slot high-torque stator
• CNC machined 6061 T6 billet aluminum heatsink can
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
• Precision balanced rotor for smooth operation, reliability and maximum RPM
• Stator-Super Thin (0.2mm) laminations
• Removable/replaceable rotor
• Precision engineered for maximum energy conversion

When a standard 1/8 motor isn't enough, the HobbyStar 4082 brushless, sensorless motor is the ticket for your 1/8 truck for monster horsepower.  4-pole design and a 12-slot stator provide unbelievable torque. High-quality features like a beautifully machined 6061 T6 billet-aluminum can, buttery-smooth ABEC5 bearings and a 82mm length make this the ultimate motor for your monster truck or truggy.

Features: 

• Brushless, sensorless 4-pole motor
• 12-slot high-torque stator
• CNC machined 6061 T6 billet aluminum heatsink can
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Universal fit, fits all 1/8 brushless cars, multiple mounting holes with M3 and M4 threads
• Precision balanced rotor for smooth operation, reliability and maximum RPM
• Stator-Super Thin (0.2mm) laminations
• Removable/replaceable rotor
• Precision engineered for maximum energy conversion