HobbyStar V3 160A Brushless Sensorless ESC, Waterproof, Temperature Monitoring

$99.99 $85.00

🚚 Free Shipping on orders over $70

The HobbyStar V3 160A is the higher-current 1/8 ESC in this Supersonic V2-style group. If you want more headroom than the 130A version for a heavier 1/8 build, this is the one to look at first: 160A continuous current, 1080A burst current, 3-6S LiPo support, IP67 waterproof design, dual XT90 battery plugs, and a compact aluminum heat-sink case.

The motor guideline steps up from 40xx-size to 42xx-size or smaller sensorless motors, which makes this the better fit for bigger 1/8 bashing and monster-truck setups. It still wants sensible gearing and motor KV, especially on 6S. More amps are helpful; they do not repeal thermodynamics, sadly.

The built-in BEC is switchable between 6.0V, 7.4V, and 8.4V at 6A, so you can feed standard or HV receiver/servo setups when the rest of the electronics support it. The ESC also includes motor overheat protection and the usual programmable surface ESC settings for throttle, cutoff, start/punch, brake, reverse, and thermal behavior.

Quick specs:

  • Type: Waterproof sensorless brushless ESC
  • Recommended scale/use: 1/8 RC cars, trucks, buggies, monster trucks, and compatible surface builds
  • Continuous current: 160A
  • Burst current: 1080A
  • Input voltage: 3-6S LiPo / 9-18 cell NiMH
  • BEC output: 6.0V/7.4V/8.4V, 6A switchable
  • Battery connector: Dual XT90 plugs
  • Motor type: Sensorless brushless
  • Resistance: 0.00028 ohm
  • 4S LiPo / 12-cell NiMH motor guideline: 42xx-size or smaller, under 3000KV on-road or under 2500KV off-road/buggy/monster
  • 6S LiPo / 18-cell NiMH motor guideline: 42xx-size or smaller, under 2500KV on-road or under 2000KV off-road/buggy/monster
  • Waterproof rating: IP67
  • Protection features: Low-voltage protection, motor overheat protection, ESC thermal protection, throttle signal loss protection
  • Cooling: Aluminum heat-sink case with removable/replaceable 30x30x10mm cooling fan
  • Dimensions: 57.5x45x37mm
  • Weight: 150g
  • Electronic switch: Included
  • Program card: Compatible, sold separately

Recently viewed products