A beautifully machined reamer with precise knurling for positive grip.  Make holes from 0-14mm with this handy body reamer and keep it protected with the included thread-on cap. Removable aluminum end-plug protects your hand and is removable to allow storage in handle.

Program card for use with HobbyStar brushed crawler ESC's.

HobbyStar brushed crawler ESC's are a simple and reliable powerplant for your crawling rig, they provide instant forward/reverse operation and necessary drag-brake.  Waterproof design for use in all conditions, they also feature a unique removable switch that can be slid on and off from the ESC or mounted remotely.  

Must use HobbyStar brushed ESC program card to program.  

Features:

• Single setting: forward/reverse w/drag brake
• Pre-wired: Tamiya style power plug and 3.5mm motor bullets
• Removable switch
• LiPo/NiMH compatibility via jumper 
• Adjustable parameters: start force, voltage cutoff, drag brake, reverse, start mode

Specifications:

• Continuous/Burst Current: 60A/320A
• Input: 2-3S LiPo, 4-9 Cells NiMH
• BEC: 7.4V/2A (switch mode)
• Connector: Tamiya, 3.5mm motor
• Case Size: 37x32x18mm
• Weight: 40g

HobbyStar watercraft ESC's are designed to provide powerful, reliable operation in your RC boat.  With an aluminum main body for durability and heat dissipation, and an efficient 3-pipe cooling system they keep their cool in demanding applications.  

Must use HobbyStar LCD Boat Program Card for programming.

Features:

• Extremely low internal resistance
• Efficient 3-pipe cooling system
• Super smooth throttle linearity
• Thermal protection
• Signal-loss protection
• Power arming protection (prevents motor starting if throttle is applied at startup)

Specifications:

• Continuous current: 130A
• Burst Current: 150A
• Battery Cell (NiXX/LiPo): 5-18NC/2-6 LiPo
• BEC Output: 5.5V/3A
• Dimensions: 65x62x23.5mm
• Weight: 125g

HobbyStar watercraft ESC's are designed to provide powerful, reliable operation in your RC boat.  With an aluminum main body for durability and heat dissipation, and an efficient 3-pipe cooling system they keep their cool in demanding applications.  

Must use HobbyStar LCD Boat Program Card for programming.

Features:

• Extremely low internal resistance
• Efficient 3-pipe cooling system
• Super smooth throttle linearity
• Thermal protection
• Signal-loss protection
• Power arming protection (prevents motor starting if throttle is applied at startup)

Specifications:

• Continuous current: 160A
• Burst Current: 180A
• Battery Cell (NiXX/LiPo): 5-18NC/2-6 LiPo
• BEC Output: 5.5V/3A
• Dimensions: 65x62x23.5mm
• Weight: 130g

HobbyStar watercraft ESC's are designed to provide powerful, reliable operation in your RC boat.  With an aluminum main body for durability and heat dissipation, and an efficient 3-pipe cooling system they keep their cool in demanding applications.  

Must use HobbyStar LCD Boat Program Card for programming.

Features:

• Extremely low internal resistance
• Efficient 3-pipe cooling system
• Super smooth throttle linearity
• Thermal protection
• Signal-loss protection
• Power arming protection (prevents motor starting if throttle is applied at startup)

Specifications:

• Continuous current: 90A
• Burst Current: 110A
• Battery Cell (NiXX/LiPo): 5-18NC/2-6 LiPo
• BEC Output: 5.5V/3A
• Dimensions: 65x49x23.5mm
• Weight: 75g

Aluminum gauge measures camber from -10° to + 10°, and ride height from 3mm to 7mm.  Also measures tire height up to 80mm.

HobbyStar capacitor packs are ideal for high-current applications like drag-racing and speed-runs.  Capacitors act like small reserves of power for when the battery is unable to keep up with demand and keep voltage from sagging (ripple current) keeping your electronics running at peak performance. 

Specifications:

• Compatible Packs: 2S-12S LiPo pack
• Maximum Voltage: 63V
• Dimensions: 55x38x44mm
• Weight: 120g
• Wire: 10AWG
• Capacitors: 6x 2200uF

HobbyStar capacitor packs are ideal for high-current applications like drag-racing and speed-runs. Capacitors act like small reserves of power for when the battery is unable to keep up with demand and keep voltage from sagging (ripple current) keeping your electronics running at peak performance.

Specifications:

• Compatible Packs: 2S-12S LiPo pack
  
• Maximum Voltage: 63V
  
• Dimensions: 75x43x18mm
  
• Weight: 80g
  
• Wire: 10AWG
  
• Capacitors: 4x 2200UF
  

• The HobbyStar Carbon Solder Jig is a small and lightweight tool designed to quickly and easily hold your wires, Deans, XT60 and bullet connectors to make convenient work of your soldering needs.
• Featuring a spring loading sliding movement, the jig opens up when compressed allowing you to insert your wires or connectors. When compression is released, the spring loaded bottom plate pulls back with clamping force, providing a secure hold while you work.
• The jig features a rectangular 17x10mm slot that securely fits Deans/T-Style and XT60 sized connectors, as well as two 8mm holes to fit the bullet connector of your choice. If you just need to solder or tin wires, the vertical posts open up to 10mm providing plenty of space for a variety of wire AWG's. To keep the jig planted, four rubber feet on the bottom keep it from moving around while you work.
• Weight: 55g Dimension: 70x60x30mm Material: Carbon Fiber
• Warning: Carbon Fiber conducts electricity! Never insert two bullet connectors from a battery into the 8mm bullet holes at the same time!

A compact set of sturdy wire cutters to easily fit into any toolbox.  Feature spring-assisted opening for easy operation.

Stop beating up your fingertips fighting ball links, these handy HobbyStar pliers allow you to easily pop ball links on and off. Feature spring-assisted opening and a curved design for easy operation.

Does your vehicle have an electronic accessory such as cooling fan, LED lights, etc. with a JST connector? This in-line (parallel) device will allow you to power it off the main battery. 

The adapter features male / female Deans style pass through with a JST female plug lead connected in parallel - the JST plug is attached to 5CM of 20awg wire - this wire is thicker and more robust than most other in-line solutions - it contains a whopping 100 strands of wire, the largest that will fit into a JST connector. 

You will have to be aware of the voltage limits of the device you connect to the JST plug lead to make sure that it can handle the voltage of the main battery connected to this adapter.

Male and Female Deans Style/T-Plugs with shrink tubing for a complete, neat install.