HobbyStar V2 motors and ESC's now include built-in temperature monitoring and thermal protection to protect your valuable electronics.  When paired with a compatible HobbyStar ESC, the user can set up the system to either reduce or completely cut off power if either the motor, or ESC temperature exceeds the programmed limit. Motors can be run without temperature port connected when paired with ESC's that do not offer temperature monitoring. 

F540 4-pole motor provides plenty of power in a beautiful design, and comes with pre-installed 4.0mm bullet connectors. 

Features:

• 4-pole motor with 12-slot high-torque design
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.35mm) stator laminations 

HobbyStar V2 motors and ESC's now include built-in temperature monitoring and thermal protection to protect your valuable electronics.  When paired with a compatible HobbyStar ESC, the user can set up the system to either reduce or completely cut off power if either the motor, or ESC temperature exceeds the programmed limit. Motors can be run without temperature port connected when paired with ESC's that do not offer temperature monitoring. 

F550 4-pole motor provides excellent torque in a beautiful design, and comes with pre-installed 4.0mm bullet connectors. 

Features:

• 4-pole motor with 12-slot high-torque design
• High-purity copper windings maximize efficiency
• High-RPM ABEC5 oversized bearings
• Precision balanced rotor for smooth operation and maximum RPM
• Super-thin (0.35mm) stator laminations 

HobbyStar fan adapters are a clever way of attaching a fan directly and securely to your brushless motor.

Set of 2 brackets for mounting one fan. 

Includes mounting screws for fan.

• 36mm:
  • Mounting holes are spaced 23.5mm apart from each other.
  • Fits 36mm can motors (most 1/10 motors cans measure 36mm, cans with finned-design may add to that diameter).
• 40mm:
  • Mounting holes are spaced 32mm apart from each other.
  • Fits 40mm can motors (most 1/8 motors cans measure 40mm, cans with finned-design may add to that diameter, these still work on top of fins).

Machined aluminum fan cover for HobbyStar 30mm fans, includes mounting screws.

Carbon Fiber fan cover for HobbyStar 40mm fans, includes mounting screws.

HobbyStar glitch-buster plugs into an open channel in your receiver in order to quiet any glitching caused by interference.

A modern twist on the classic glow-plug wrench, the HobbyStar Glow Multi-Wrench combines 10MM and 8MM nut drivers with a 3MM and 5MM hex driver for maximum versatility.

Hex drivers are hard-coated for long-life and precision operation.

HobbyStar grub screws are manufactured from 12.9 grade steel, and finished with a durable and attractive gold finish for easy installation and corrosion resistance.

Pack of 5 screws.

The HobbyStar HBW-4717HV servo is a Brushless, HV-capable servo (4.8V-8.4V range) with amazing speed and torque. Fully-waterproof design combined with all-steel gears for reliable operation, and an aluminum center-case to aid in cooling. This is an ideal servo for all-weather applications where torque and speed are both priorities!

Specifications:

• Speed @6.0V: 0.08 sec
• Speed @8.4V: 0.06 sec
• Torque @6.0V: 278 oz/in
• Torque @8.4V: 389 oz/in
• Pulse/Frequency: 1500µ/330Hz
• Dimensions: (LxWxH) 40.5x20x37.5mm
• Weight: 67g
• Bearing: Dual ball bearing
• Gears: Steel
• Motor: Brushless
• Input Voltage: 4.8V-8.4V
• Output Shaft: 25T spline
• Wire Harness Length: 260mm 

The HobbyStar HBW-4724HV servo is a Brushless, HV-capable servo (4.8V-8.4V range) with killer speed and un-real torque. Fully-waterproof design combined with all-steel gears for reliable operation, and an aluminum center-case to aid in cooling. This is an ideal servo for all-weather applications where speed is needed and torque is mandatory!

Specifications:

• Speed @6.0V: 0.11 sec
• Speed @8.4V: 0.08 sec
• Torque @6.0V: 347 oz/in
• Torque @8.4V: 486 oz/in
• Pulse/Frequency: 1500µ/330Hz
• Dimensions: (LxWxH) 40.5x20x37.5mm
• Weight: 67g
• Bearing: Dual ball bearing
• Gears: Steel
• Motor: Brushless
• Input Voltage: 4.8V-8.4V
• Output Shaft: 25T spline
• Wire Harness Length: 260mm 

The HobbyStar HCS-4502 servo is a super-speed digital unit with excellent torque. Combined with all-steel gears for reliable operation and an aluminum center-case to aid in cooling and add strength this is a perfect servo for most 1/10 competition applications. 

Specifications:

• Speed @4.8V: 0.08 sec
• Speed @6.0V: 0.06 sec
• Speed @8.4V: 0.05 sec
• Torque @4.8V: 111 oz/in
• Torque @6.0V: 139 oz/in
• Torque @8.4V: 180 oz/in
• Pulse/Frequency: 1500µ/330Hz
• Dimensions: (LxWxH) 40.5x20x37.5mm
• Weight: 58g
• Bearing: Dual ball bearing
• Gears: Steel
• Motor: Digital Coreless
• Input Voltage: 4.8V-8.4V
• Output Shaft: 25T spline
• Wire Harness Length: 260mm 

The HobbyStar HCS-4519 servo is a high-speed, high-torque servo that is high-voltage capable. Combined with all-steel gears for reliable operation and an aluminum center-case to aid in cooling and add strength this is a perfect servo for 1/10, 1/8 and aircraft applications. 

Specifications:

• Speed @4.8V: 0.12 sec
• Speed @6.0V: 0.09 sec
• Speed @8.4V: 0.08 sec
• Torque @4.8V: 180 oz/in
• Torque @6.0V: 222 oz/in
• Torque @8.4V: 278 oz/in
• Pulse/Frequency: 1500µ/330Hz
• Dimensions: (LxWxH) 40.5x20x37.5mm
• Weight: 58g
• Bearing: Dual ball bearing
• Gears: Steel
• Motor: Digital Coreless
• Input Voltage: 4.8V-8.4V
• Output Shaft: 25T spline
• Wire Harness Length: 260mm 

The HobbyStar HCS-4521WP servo features a fully waterproof design and massive-torque (444oz/in @7.4V) for the ultimate crawler servo. All-steel gears for reliable operation and an aluminum center-case to aid in cooling and add strength this is a perfect servo for crawling rig. 

Specifications:

• Speed @4.8V: 0.16 sec
• Speed @6.0V: 0.13 sec
• Speed @7.4V: 0.10 sec
• Torque @4.8V: 287 oz/in
• Torque @6.0V: 347 oz/in
• Torque @7.4V: 444 oz/in
• Pulse/Frequency: 1500µ/330Hz
• Dimensions: (LxWxH) 40.5x20x37.5mm
• Weight: 58g
• Bearing: Dual ball bearing
• Gears: Steel
• Motor: Digital Coreless
• Input Voltage: 4.8V-7.4V
• Output Shaft: 25T spline
• Wire Harness Length: 260mm 

The HobbyStar HCS-4529 servo provides over 400oz/in of torque when operated at 8.4V (can be run down to 4.8V). All-steel gears for reliable operation and an aluminum center-case to aid in cooling and add strength this is a perfect servo for 1/10 and 1/8 applications where torque is a must. 

Specifications:

• Speed @4.8V: 0.18 sec
• Speed @6.0V: 0.15 sec
• Speed @8.4V: 0.11 sec
• Torque @4.8V: 292 oz/in
• Torque @6.0V: 361 oz/in
• Torque @8.4V: 417 oz/in
• Pulse/Frequency: 1500µ/330Hz
• Dimensions: (LxWxH) 40.5x20x37.5mm
• Weight: 58g
• Bearing: Dual ball bearing
• Gears: Steel
• Motor: Digital Coreless
• Input Voltage: 4.8V-8.4V
• Output Shaft: 25T spline
• Wire Harness Length: 260mm