Monitoring the temperature of your electronics is one of the most critical steps of setting up any system and the key to long-lasting electronics and you can eliminate the guessing with the HT-101 Infrared Thermometer from Hobbystar. Ultra-compact design lets you slip it in your pocket and have it handy for quick, precise temperature readings of motors. ESC's, servos etc.  They even throw in an extra set of batteries!

Features:

• Selectable between C and F
• Data hold
• Low-battery indication
• Auto-power off
• Compact design with built-in clip

Specifications:

• Temp Range: -50C~260C /  -58F~500F
• Temp Accuracy: +/- 2%
• Emissivity: 0.95
• Distance to Spot ratio: 1:1
• Response time and Wavelength: 500ms & (8-14)um
• Power: 2x 1.5V LR44 button battery
• Dimensions: 18x90mm
• Weight: 20g

Monitoring the temperature of your electronics is one of the most critical steps of setting up any system and the key to long-lasting electronics.  You can eliminate the guessing with the HT-188 Infrared Laser Thermometer from Hobbystar. Ergonomic design and built-in laser pointer provide quick, precise temperature readings of motors. ESC's, servos etc.  Easy to read color display.

Features:

• Laser pointer eliminates guessing
• Color display
• Selectable between C and F
• Data hold
• Low-battery indication
• Auto-power off
• Selectable between C and F

Specifications:

• Temp Range: -50C~380C /  -58F~716F
• Temp Accuracy: +/- 2%
• Emissivity: Adjustable from 0.1-1.0
• Distance to Spot ratio: 13:1
• Response time and Wavelength: <1s
• Power: 9V battery (included)

Get the high-current capability and excellent conductivity of bullet connectors in a fool-proof housing with the HXT4MM connector.  Bullet plugs are known for being some of the most efficient connectors, but they are easily shorted out when they are left loose.  The HXT4MM connector can handle over 90 Amps and are universal (each plug can be used on either a battery or a component). Pack of 5 connectors.

HXT4MM on one end, T-Plug/Deans style M on the other.

5 sets of JR-style connectors, male and female.  Requires crimping pliers to install. 

Set of JST Female and JST Male plugs with 150mm of 22AWG wire already soldered on.  

LCD program card for use with the HobbyStar 1/5 Scale ESC's ESC. With this card you can program your ESC using the card as a stand-alone unit, or you can use it as a PC link to make changes or firmware upgrades through your PC. Note:  This only works with the 1/5 Scale ESC's.

LCD program card for use with the HobbyStar 160A and 220A Turbo Competition ESC's ONLY. With this card you can program your ESC using the card as a stand-alone unit, or you can use it as a PC link to make changes or firmware upgrades through your PC. Note:  This only works with the 160A and 220A Turbo ESC's.

LCD program card for use with the HobbyStar 120A-155A aircraft ESC's. With this card you can program your ESC using the card as a stand-alone unit, or you can use it as a PC link to make changes or firmware upgrades through your PC. Note:  This only works with the 120A-155A HobbyStar air ESC's. 

LCD program card for use with the HobbyStar Boat ESC's. With this card you can program your ESC using the card as a stand-alone unit, or you can use it as a PC link to make changes or firmware upgrades through your PC. Note:  This ONLY works with boat ESC's.

This is an LED program card for use with HobbyStar ESC's, works with 45A, 60A, 80A, 120A (non-turbo) and 150A ESC's.  Note:  This does NOT work with the 120A Turbo ESC, the HobbyStar LCD Card is required for this ESC. Does not work with "RTR" series ESC's.