5 complete sets of HobbyStar MT60 connectors, each set includes 1 male, 1 female and 2 rear caps for a clean install with no shrink tubing necessary.  Makes plugging and unplugging motor from ESC quick, easy and foolproof with keyed plugs to ensure proper orientation. 3.5mm bullets.

One of those tools you'll wonder how you lived without, the multi-function soldering jig makes easy work of holding some of the most popular connector styles to make soldering a much easier affair. 

Has cutouts for XT60 (M/FM), Dean's/T-Plug (M/FM), XT90 (M/FM), Mini-T (M/FM) and bullet connector slots from 2.4mm all the way to 10.4mm.

Durable machined aluminum with heat-resistant composite inserts.

The HobbyStar Shock Plier is an ingenious multi-tool that is much more than just a shock plier.  The ingenious design incorporates shock plier function with the capability to hold shock bodies, measure screw and shock-shaft length, press ball-ends on and off of cups and even function as a solder-jig and wrench.

Features:

• Beautifully CNC-machines and anodized in a durable black finish
• Cutouts for 3.0, 3.5 and 4.0mm shafts
• Multiple locations for shock bodies
• Cutouts for holding Dean's (T-plug) and XT60 plugs
• Holes from 2.0 to 7.8mm for holding a wide variety of bullet terminals during soldering
• 4.0 and 5.0mm openings on plier end to function as a wrench (great for turnbuckles)
• Press for installing and removing ball cups
• 2 different areas for measuring fastener and shock shaft length

Multi-Use shock pliers with a built-in 2.5mm tire punch.

A high-quality power driver to give your wrist a break!  The powerful motor makes easy work of removing and installing fasteners. Built-in battery charges via USB plug, and an integrated LED Light illuminates your work in low light.  Includes 4 titanium-nitrate coated hex-tips, all in a handy carrying case.

Specifications:

• Battery: Li-Ion 3.6V, 900mAh
• Included Tips: 1.5mm, 2.0mm, 2,5mm and 3.0mm hex
• RPM: (280RPM (no-load)
• Torque: 2Nm (10Nm manual)
• Chuck: 6.35mm hex (1/4")
• Operating Time: 40 minutes
• Charge Time: 60 minutes
• Charging: 5V Micro-pin USB 
• Weight: 150g

Power driver bit with standard 1/4" drive end for use with Hobbystar Power Screwdriver and in common electric screwdrivers. TiNi coated.

• Tip sizes: 1.5mm  2.0mm  2.5mm  3.0mm

Quickly and easily make changes to your HobbyStar aircraft ESC with this compact program card.  Simply set the jumpers to the desired settings and connect card to powered up ESC and tone will confirm settings have been stored.  It doesn't get any easier than that!

Specifications:

• Size: 55x42.5x3.5mm
• Weight: 6.5g 

NOTE: This program card is for 80A and smaller HobbyStar aircraft ESC's with blue PVC wrapper.  Not for use with high-power ESC's with aluminum housings.

With up to 130 Amps of continuous current capability, the HobbyStar QS8-S connector is a great choice for high-current applications.  Features anti-spark circuitry to reduce sarking when plugging in high-power systems.  1 set of 1 male and 1 female connector.

This handy tool from HobbyStar combines both ride height and chassis droop measuring capabilities in one easy to use gauge.

Measures ride height from 2mm to 10mm, and droop from -2mm to 11mm.

HobbyStar battery straps are rubberized on the side facing the battery which ensures the battery can't slip out, eliminating the need for additional hook and loop fastening.  High-quality construction for durability and reliability.  Each strap measures 20*200MM, come in a pack of 5 straps.

HobbyStar battery straps are rubberized on the side facing the battery which ensures the battery can't slip out, eliminating the need for additional hook and loop fastening.  High-quality construction for durability and reliability.  Each strap measures 20*300MM, come in a pack of 5 straps.

Y-harness built with high-quality wire and connectors, 300mm wire length.