The SKYRC engine heater uses technology similar to that used by Formula 1, Indy Car, and NASCAR Teams! It will properly pre-heat your engine to 60-70°C in 10 minutes based on ambient temperature.

SKYRC engine heater will pre-heat all the critical parts of your nitro engine, giving you reduced stress and wear on the engine. It helps relieve stress on the crank, con-rod, piston, and sleeve during warm-up. It also gives you a very easy and smooth engine start, with no stress on your starter box. Fuel consumption is much less, as you do not have to spend time warming up and adjusting your engine. A pre-heated glow-plug will increase the life of your plug. It is also perfect for break-in, as it reduces the "pinch" on your new engine. You will experience that engine pre-heating is a must with nitro motors, and most importantly, it will quickly pay for itself by increasing engine life and performance!

The SkyRC Omni XT90 Power Distribution Hub is a compact, high-current DC power splitter built to clean up your pit bench. Feed it from a single XT90 source and power multiple RC devices and chargers at the same time - no adapter mess, no daisy chains. It is designed for high-load setups with an 8V to 36V DC input range and up to 55A max input current.

Omni combines RC-standard outputs with modern USB fast charging. You get one XT90 output, two XT60 outputs, dual 4mm banana pairs, plus USB-C and USB-A for phones, tablets, radios, and accessories. USB-C supports up to 65W fast charging, and USB-A supports up to 18W. When USB-C and USB-A are used at the same time, the hub limits USB output to 5V (up to 18W total) for stable shared power.

Specs

• Model: Omni Hub - SK-600163
• Input connector: XT90
• Input voltage: 8V to 36V DC
• Max input current: 55A
• XT outputs: XT90 x1 up to 55A, XT60 x2 up to 30A each
• Banana outputs: 4mm x2 pairs up to 10A
• USB outputs: USB-C up to 65W, USB-A up to 18W
• USB shared mode: USB-C + USB-A simultaneously - 5V output, up to 18W total
• Size: 151x50x29.5mm
• Weight: about 310g

Note: SkyRC references "up to 2000W" stable power distribution when paired with suitable input power. With SkyRC eFUEL PSU2000 AC 220V to 240V version, the stated maximum output power is 1980W. Power supply is sold separately.

The PCH-150 PD charging adapter expands the possibilities of the D200neo charger with another handy function. With 150W sheer charging power, it can supply a wide variety of devices with fresh energy at the same time via the 4 connections. This includes even smartphones and larger laptops.

Technical Specifications:

Efficient Power Management: The SKYRC Power Switch offers a smart solution for managing power in your RC models. It's a tiny MCU controlled switch, designed for precision and reliability in power control.

User-Friendly Design: With its simple push button operation, the SKYRC Power Switch is incredibly easy to use. It eliminates the need for mechanical switches, providing a more consistent and reliable experience.

Durable and Compact: The switch is housed in a durable plastic case, making it robust for use in various RC applications. Its compact size allows for easy installation in tight spaces.

Universal Compatibility: Ideal for a range of RC models, this power switch is compatible with both LiPo and NiMH batteries, ensuring versatility across different types of vehicles.

Safe and Secure: Prioritizing safety, the SKYRC Power Switch includes features to protect against electrical malfunctions, offering peace of mind during use.

Experience Seamless Tire Balancing with SKYRC: The SKYRC RC Tire Balancer brings unparalleled precision to RC racing enthusiasts. By incorporating Bluetooth connectivity and a dedicated app, this device simplifies the tire balancing process, allowing for accurate adjustments that enhance performance and reduce wear on your RC car.

Advanced Technology for Optimal Performance: Utilizing a high-accuracy load cell and a precision stepper motor, the SKYRC Tire Balancer ensures every tire is balanced to perfection. The innovative balancing algorithms are tailored specifically for RC tires, promoting stability and maneuverability at high speeds.

Designed for Convenience and Compatibility: Compatible with 1/10 scale RC cars (and 1/8 with an optional adapter), this tire balancer is a versatile tool for a wide range of racing enthusiasts. The intuitive RC Gears app provides real-time data and guidance, making tire balancing accessible for both beginners and seasoned racers.

Enhanced User Experience with Thoughtful Features: The 2.8-inch TFT screen offers a clear view of the balancing process, even in direct sunlight. The device's thoughtful design includes a calibration function for precise measurements and reverse polarity protection for safe operation.

What's Included for a Complete Set-Up: Each SKYRC Tire Balancer comes with essential accessories, including a 1/10 tire adapter, balancing putty, a DC power cable, and a carrying case for portability. An optional 1/8 tire adapter is available to accommodate different tire sizes.

Watch a video about Technical Insights, Demonstrations & Guide to Solving Common Problems

Only for use with 1/10 scale rubber tires

The SkyRC tire warmer packs plenty of features to keep your tires sticky for the next race!

1. DC JACK. Located on the left side of the tire warmer is a standard DC jack for connecting power-lead.

2. XT60 CONNECTOR. Also located on the right side of the tire warmer is a secondary XT60 Connector. This jack is designed for powering the tire warmer with a 4S LiPo battery via XT60 connector. Battery or DC power source must be capable of delivering at least 8 amps while maintaining 12V DC.

Features:

• Dual Power Source: 4S LiPo battery pack and 12-18V DC input.
  
• Front & Rear temperature can be set independently
  
• Temperature of 4 tires is controlled by MCU
  
• Removable front & rear tire warmers
  
• 8 different beep tones
  
• Minimum temperature
  
• Celsius - Fahrenheit selectable display
  
• Four LED indicators
  
• Safety timer
  

Intuitive User Interface

• Large LCD Display Screen 
  
• Four choices Up, Down,Left,Right set with the Joystick.

Four LED indicators

• The LED indicates red when the temperature of the tire warmers is warming. 
  
• The LED indicators turn green once finished
  

What’s in the Box

• Tire Warmer Controller
  
• Front Tire Warmer Cups
  
• Rear Tire Warmer Cups
  
• DC Input Cable
  

SKYRC SKU SK-600064-06

The SKYRC RacingStar Pro Electronic MCU Tire Warmer is a cutting-edge solution for pre-heating tires in 1/10 scale touring car racing. It features four individual tire warmer bands, offering precise temperature control for optimal performance.

Advanced Technology and Features

• Independent Temperature Control: Front and rear temperatures can be set independently, allowing for tailored heating for each tire.
• Microcontroller Unit (MCU): Ensures accurate temperature monitoring and control for all four tires.
• Versatile and User-Friendly Design: Comes with removable front and rear tire warmers for convenience. The user interface includes four LED indicators for easy status checks and 8 different beep tones for alerts.
• Selectable Temperature Units: Choose between Celsius and Fahrenheit for temperature display according to your preference.
• Dual DC Inputs: Can be powered via a standard DC power source or a 3S LiPo battery. It also features a Direct Plug Docking System for versatile power options.

Key Benefits:

• Enhanced Grip and Performance: Pre-heating tires increase the rubber's coefficient of friction, providing better grip right from the start of the race.
• Ready to Race: Tires reach the optimal temperature quickly, ensuring your vehicle is race-ready immediately.
• Safety Features: Includes a safety timer to prevent overheating and potential damage to the tires.

Specifications

• Temperature Range: 20-80°C / 68-176°F
• Power Options: DC power supply, 3S LiPo battery
• LED Indicators: 4 (Red for heating, Green for ready)
• Safety: Built-in safety timer
• Compatibility: Designed for 1/10 size touring cars

The SkyRC Rubber Tire Sander has a 7.2V-12V and can be can be powered by a power supply, as well as powered directly from a LiPo battery (power cables come equipped with 4.0mm bullet plugs). 

The Tire Sander is a quick and easy way to remove the seam from the center of a new tire, without having to take several laps around the track.

Rubber tire sander for touring class, powerful high torque DC motor with dual metal bearings and a lightweight aluminum case.

A set of two replacement heating cups for SKYRC RacingStar Pro Electronic Tire Warmer, for use with 1/10 scale rubber tires

The SKYRC Toro TS120 Competition ESC features a new anodized aluminum case and a low internal resistance of <0.0003 ohm. Smooth and precise throttle response combined with braking performance ideal for 1/10th scale competition. With 10 user defined power profiles available and Advance Timing System (ATS) for "Boost" and "Turbo" profiles both provide unique power curves suited for running in non-spec stock or modified classes.

Blinky mode (zero timing) profile is available for organized spec class racing. 

New aluminum casing improves cooling efficiency while providing a works appearance.  The TS120 features an onboard switch design. No more external wired switches means racers no longer need to worry about switch placement and finding room on today’s high performance racing chassis’.

Available program box is available for adjusting the ESC without the need for a computer or laptop at the track allowing racers to change ESC profiles, adjust ESC settings, test PPM signal between transmitter and receiver, verify servo performance, motor KV / RPM performance and LiPo battery monitor functions on the LCD screen through the on-board RX plug, motor sensor, LiPo balancer, and USB ports (program box sold separately).

Can also be programmed via SkyLink and WiFi Module.

NOTE: This ESC is designed for use in 1/10 2WD buggies, 2WD SCT's, 2WD stadium trucks and 1/10 4WD buggies with 540 2-pole motors. NOT FOR USE IN 4WD SHORT COURSE TRUCKS.  NOT FOR USE WITH 4-POLE MOTORS, AND ALTHOUGH SPECS LIST 3S COMPATABILITY, MOTOR TURN LIMITS MUST BE ADHERED TO WHEN RUNNING 3S OR ESC DAMAGE MAY RESULT.  3S USE IS NOT RECOMMENDED WITH THIS CATEGORY OF ESC.

The SKYRC Toro TS160-PRO V2 is an aluminum racing sensored ESC built for serious 1/10 electric setups where smooth throttle feel, strong braking, and stable temps matter. It supports brushless sensored and sensorless motors and runs on 2-3S LiPo (or 6-9S NiMH), making it a strong choice for touring cars, buggies, and crawlers that need consistent power under load.

V2 adds modern pit convenience with RC Gears app programming, so you can tune key settings from your phone when used with the optional SKYRC Bluetooth dongle. A high-output built-in BEC delivers up to 15A with selectable 6.0V or 7.4V, so you can run standard or HV servos without adding an external receiver pack. The aluminum case and cooling fan help keep performance stable during long runs and race conditions.

SKYRC Part Number SK-300078

The SKYRC TWneo is an upgraded, compact Tire Warmer controller designed to get consistent grip from lap one by preheating your touring car tires to a repeatable temperature. Set temperatures for front and rear independently, then choose Quick Warm, 2-Stage Warm, or 3-Stage Warm to match track conditions - fast heat-up when you’re rushed, or staged conditioning when you want maximum consistency. Control it directly on the unit (TFT screen + metal wheel) or wirelessly with the RC GEARS smartphone app via Bluetooth.

This kit includes the TWneo Tire Warmer controller plus 4 warmer silicone cups for wrapping/holding tires during heating. These cups are intended for 1/10 on-road touring car tires (standard TC rubber) and generally fit tires with an outside diameter around ~63-65 mm. 

Power is flexible: use XT60 DC input (6-20V) from a pit battery/power supply, or USB-C PD input (20V, 100W max). TWneo also includes a high-power discharge function for battery management when running on DC input (PD mode does not support discharge).

Heating range is 20-80°C (68–176°F) with 0.1° steps, and the unit is ultra pit-bag friendly at about 116 g.

SKYRC Part Number SK-600157-01

SKYRC Tire Warmer Bands elevate your RC racing experience by pre-heating tires to the ideal temperature, ensuring optimal grip and performance from the start. These bands are designed to fit a wide range of tire sizes, suitable for both 1/10 and 1/8 scale RC cars. By maintaining a consistent temperature, these bands help in achieving a uniform tire performance, crucial for competitive racing.

Simple and efficient, these warmer bands plug directly into the SKYRC tire warmer controller, offering an easy-to-use solution for racers. They can be powered by a 12V DC source or a 3S LiPo battery, providing flexibility for use in various setups. This adaptability ensures that racers can maintain optimal tire conditions, regardless of the power sources available at different racing venues.

Compared to alternatives, SKYRC Tire Warmer Bands stand out for their ease of use and wide compatibility. Unlike some other warmers that may require specific setups or additional equipment, these bands offer a plug-and-play solution that caters to a broad range of tire sizes and types. This universal applicability makes them a preferred choice for many racers looking for a hassle-free tire warming solution.

Impact on performance is significant, as pre-heated tires provide better traction, quicker lap times, and a more predictable handling experience. Racers using SKYRC Tire Warmer Bands can expect their vehicles to perform at their best right from the start, without the need for tires to gradually warm up during the race. This can be the difference between leading the pack and playing catch-up.

Get your chassis balance dialed with the SKYRC SCWS2000 Wireless Corner Weight System. Corner weights are one of those "small changes, big results" tools - especially for touring and drift cars where a few grams left or right can change steering feel, traction roll, and consistency. SCWS2000 measures all 4 corners in real time so you can see front vs rear, left vs right, and diagonal balance while you make adjustments to preload, ride height, battery position, electronics placement, and ballast.

The best part is the workflow. No display box, no wire mess across your bench. Each pad connects over Bluetooth 5.0 to the RC Gears app (iOS and Android), so you get a full-screen layout that is easy to read at the track. You can quickly confirm total weight, corner weights, and distribution, then re-check after each change. There is also in-app calibration support if you want to zero things in using a 2000g reference weight.

The system is compact and travel-friendly. Each scale pad supports up to 2000g (8000g total), with 0.1g increments (0.01 oz) and SKYRC calls out 1g accuracy for RC setup work (tolerance is listed as +/- 3g). Pads run on CR2450 coin batteries, and SKYRC notes up to about 30 hours of continuous runtime. Each pad is about 68x68x22.5mm and about 70g, so it fits easily in a pit bag without taking over your toolbox.